"Passed on the first try! I loved that the questions are updated as new exams are released, in order to keep up the most recent content being covered in the test. The date at the top of each page shows how current the material was, which was nice to see. "
"At first glance I thought this site is just like the other 99% websites in this industry, but boy I was wrong...its funny that two weeks before the exam I knew nothing about 100-105, but with this amazing site I managed to study very quickly and pass the exam easily without spending tons of money and time on preparing for the exam."
"As a professional in my field for over 8 years I could tell that not only were these questions real, but that an expert had been involved in designing and reviewing the questions for the Cisco Interconnecting Cisco Networking Devices Part 1 (ICND1 v3.0) 100-105 exam. "
Are you looking for real exams dumps for the 100-105 Cisco Interconnecting Cisco Networking Devices Part 1 (ICND1 v3.0) exam? ITExamLabs.com is dedicated to provide real and updated exam questions and answers, FREE of cost.
The best way to prepare for 100-105 exam is not reading a text book, but taking 100-105 vce exam and understanding the correct answers. Practice questions help prepare students for not only the concepts, but also the manner in which questions and answer options are presented during the real exam.
ITExamLabs.com provides not only actual Cisco 100-105 practice test, but also detailed answers, explanations and diagrams. Having authentic and current exam questions, will you pass your test on the first try!
P.S. High quality 100-105 testing engine are available on Google Drive, GET MORE: https://drive.google.com/open?id=16T0cVE2WYz-0Y7Wh56_Fr0zWNJ4X7B2XNew Cisco 100-105 Exam Dumps Collection (Question 1 - Question 10)Q1. A network administrator is troubleshooting the OSPF configuration of routers R1 and R2. The routers cannot establish an adjacency relationship on their common Ethernet link.The graphic shows the output of the show ip ospf interface e0…
P.S. High quality 100-105 interactive bootcamp are available on Google Drive, GET MORE: https://drive.google.com/open?id=1wKeQp_fzylh6B_iOxIFNYB8egVM39bjONew Cisco 100-105 Exam Dumps Collection (Question 2 - Question 11)New Questions 2Which technique can you use to route IPv6 traffic over an IPv4 infrastructure?A. NATB. 6to4 tunnelingC. L2TPv3D. dual-stackView AnswerAnswer: BNew Questions 3Which statement about the inside interface configuration in a NAT deployment is true?A. It…
P.S. Guaranteed 100-105 lab are available on Google Drive, GET MORE: https://drive.google.com/open?id=1zVm2AfwEpRfDX2PzuVevwDKI_-ZAI1M1New Cisco 100-105 Exam Dumps Collection (Question 11 - Question 20)New Questions 11Which feature allows a device to use a switch port that is configured for half-duplex to access the network?A. CSMA/CDB. IGMPC. port securityD. split horizonView AnswerAnswer: AExplanation:Ethernet began as a local area network technology that provided a…
P.S. Real 100-105 free demo are available on Google Drive, GET MORE: https://drive.google.com/open?id=1wKeQp_fzylh6B_iOxIFNYB8egVM39bjONew Cisco 100-105 Exam Dumps Collection (Question 12 - Question 21)Q12. What does a host on an Ethernet network do when it is creating a frame and it does not have the destination address?A. Drops the frameB. Sends out a Layer 3 broadcast messageC. Sends a message to…
P.S. Downloadable 100-105 discount pack are available on Google Drive, GET MORE: https://drive.google.com/open?id=1wKeQp_fzylh6B_iOxIFNYB8egVM39bjONew Cisco 100-105 Exam Dumps Collection (Question 6 - Question 15)New Questions 6In which two ways does TCP differ from UDP? (Choose two.)A. TCP segments are essentially datagrams.B. TCP uses broadcast delivery.C. TCP provides sequence numbering of packets.D. TCP provides synchronized communication.E. TCP provides best effort delivery.View AnswerAnswer:…
Q1. DRAG DROP - (Topic 4) Drag the definition on the left to the correct term on the right. Not all definitions on the left will be used. View AnswerAnswer: Q2. - (Topic 1) Refer to the exhibit. What kind of cable should be used to make each connection that is identified by the numbers shown? A. 1 - Ethernet Crossover cable 2 - Ethernet…
Q1. - (Topic 1) Refer to the exhibit. Host A is sending a packet to Host B for the first time. What destination MAC address will Host A use in the ARP request? A. 192.168.0.1 B. 172.16.0.50 C. 00-17-94-61-18-b0 D. 00-19-d3-2d-c3-b2 E. ff-ff-ff-ff-ff-ff F. 255.255.255.255 View AnswerAnswer: E Explanation: For the initial communication, Host A will send a broadcast ARP (all F's) to determine the correct address to use to…
Q1. - (Topic 3) Which IP addresses are valid for hosts belonging to the 10.1.160.0/20 subnet? (Choose three.) A. 10.1.168.0 B. 10.1.176.1 C. 10.1.174.255 D. 10.1.160.255 E. 10.1.160.0 F. 10.1.175.255 View AnswerAnswer: A,C,D Explanation: All IP address in IP ranges between: 10.1.160.1 and 10.1.175.254 are valid as shown below Address: 10.1.160.0 00001010.00000001.1010 0000.00000000 Netmask: 255.255.240.0 = 20 11111111.11111111.1111 0000.00000000 Wildcard: 0.0.15.255 00000000.00000000.0000 1111.11111111 Which implies that: Network: 10.1.160.0/20 00001010.00000001.1010 0000.00000000 HostMin:…
Q1. - (Topic 3) Which two statements describe the process identifier that is used in the command to configure OSPF on a router? (Choose two.) Router(config)# router ospf 1 A. All OSPF routers in an area must have the same process ID. B. Only one process number can be used on the same router. C. Different process identifiers can be used to run multiple OSPF…
Q1. - (Topic 3) Which one of the following IP addresses is the last valid host in the subnet using mask 255.255.255.224? A. 192.168.2.63 B. 192.168.2.62 C. 192.168.2.61 D. 192.168.2.60 E. 192.168.2.32 View AnswerAnswer: B Explanation: With the 224 there are 8 networks with increments of 32 One of these is 32 33 62 63 where 63 is broadcast so 62 is last valid host out of given choices. Q2.…
Q1. - (Topic 3) Which two commands will display the current IP address and basic Layer 1 and 2 status of an interface? (Choose two.) A. router#show version B. router#show ip interface C. router#show protocols D. router#show controllers E. router#show running-config View AnswerAnswer: B,C Explanation: The outputs of “show protocols” and “show ip interface” are shown below: Global values:Internet Protocol routing is enabledSerial0/0 is up, line protocol is downInternet address…
Q1. - (Topic 2) Refer to the exhibit. The MAC address table is shown in its entirety. The Ethernet frame that is shown arrives at the switch. What two operations will the switch perform when it receives this frame? (Choose two.) A. The switch will not forward a frame with this destination MAC address. B. The MAC address of 0000.00aa.aaaa will be added to the MAC…
Q1. - (Topic 3) Given an IP address of 192.168.1.42 255.255.255.248, what is the subnet address? A. 192.168.1.8/29 B. 192.168.1.32/27 C. 192.168.1.40/29 D. 192.168.1.16/28 E. 192.168.1.48/29 View AnswerAnswer: C Explanation: 248 mask uses 5 bits (1111 1000) 42 IP in binary is (0010 1010) The base subnet therefore is the lowest binary value that can be written without changing the output of an AND operation of the subnet mask and IP... 1111 1000…
Q1. - (Topic 3) Which statement is true? A. An IPv6 address is 64 bits long and is represented as hexadecimal characters. B. An IPv6 address is 32 bits long and is represented as decimal digits. C. An IPv6 address is 128 bits long and is represented as decimal digits. D. An IPv6 address is 128 bits long and is represented as hexadecimal characters. View AnswerAnswer:…
Q1. - (Topic 1) What are two common TCP applications? (Choose two.) A. TFTP B. SMTP C. SNMP D. FTP E. DNS View AnswerAnswer: B,D Explanation: SMTP uses TCP port 25, while FTP uses TCP ports 20 and 21. Reference: http://pentestlab.wordpress.com/2012/03/05/common-tcpip-ports/ Q2. - (Topic 1) Refer to the exhibit. As packets travel from Mary to Robert, which three devices will use the destination MAC address of the packet to determine a forwarding path?…
Q1. - (Topic 3) Which three approaches can be used while migrating from an IPv4 addressing scheme to an IPv6 scheme? (Choose three) A. static mapping of IPv4 address to IPv6 addresses B. configuring IPv4 tunnels between IPv6 islands C. use DHCPv6 to map IPv4 addresses to IPv6 addresses D. use proxying and translation (NAT-PT) to translate IPv6 packets into IPv4 packets E. configure IPv6 directly F.…
Q1. - (Topic 2) A switch receives a frame on one of its ports. There is no entry in the MAC address table for the destination MAC address. What will the switch do with the frame? A. drop the frame B. forward it out of all ports except the one that received it C. forward it out of all ports D. store it until it…
Q1. - (Topic 2) Refer to the exhibit. What two things can the technician determine by successfully pinging from this computer to the IP address 172.16.236.1? (Choose two) A. The network card on the computer is functioning correctly. B. The default static route on the gateway router is correctly configured. C. The correct default gateway IP address is configured on the computer. D. The device with…
Q1. - (Topic 3) What is the default administrative distance of the OSPF routing protocol? A. 90 B. 100 C. 110 D. 120 E. 130 F. 170 View AnswerAnswer: C Explanation: Default Distance Value Table This table lists the administrative distance default values of the protocols that Cisco supports: If the administrative distance is 255, the router does not believe the source of that route and does not install the…
Q1. - (Topic 2) Refer to the exhibit. The MAC address table is shown in its entirety. The Ethernet frame that is shown arrives at the switch. What two operations will the switch perform when it receives this frame? (Choose two.) A. The switch will not forward a frame with this destination MAC address. B. The MAC address of 0000.00aa.aaaa will be added to the MAC…
Q1. - (Topic 3) Which characteristics are representative of a link-state routing protocol? (Choose three.) A. provides common view of entire topology B. exchanges routing tables with neighbors C. calculates shortest path D. utilizes event-triggered updates E. utilizes frequent periodic updates View AnswerAnswer: A,C,D Explanation: Each of routers running link-state routing protocol learns paths to all the destinations in its “area” so we can say although it is a…
Q1. - (Topic 4) When configuring NAT, the Internet interface is considered to be what? A. local B. inside C. global D. outside View AnswerAnswer: D Explanation: The first step to deploy NAT is to define NAT inside and outside interfaces. You may find it easiest to define your internal network as inside, and the external network as outside. However, the terms internal and external are subject to…
Q1. - (Topic 1) Which two characteristics apply to Layer 2 switches? (Choose two.) A. Increases the number of collision domains B. Decreases the number of collision domains C. Implements VLAN D. Decreases the number of broadcast domains E. Uses the IP address to make decisions for forwarding data packets View AnswerAnswer: A,C Explanation: Layer 2 switches offer a number of benefits to hubs, such as the use of…
Q1. - (Topic 5) Refer to the exhibit. A technician is troubleshooting a host connectivity problem. The host is unable to ping a server connected to Switch_A. Based on the results of the testing, what could be the problem? A. A remote physical layer problem exists. B. The host NIC is not functioning. C. TCP/IP has not been correctly installed on the host. D. A local…
Q1. - (Topic 3) Refer to the exhibit. PC1 pings PC2. What three things will CORE router do with the data that is received from PC1? (Choose three.) A. The data frames will be forwarded out interface FastEthernet0/1 of CORE router. B. The data frames will be forwarded out interface FastEthernet1/0 of CORE router. C. CORE router will replace the destination IP address of the…
Q1. - (Topic 2) Refer to the exhibit. What two things can the technician determine by successfully pinging from this computer to the IP address 172.16.236.1? (Choose two) A. The network card on the computer is functioning correctly. B. The default static route on the gateway router is correctly configured. C. The correct default gateway IP address is configured on the computer. D. The device with…
Q1. - (Topic 3) Refer to the exhibit. If the router Cisco returns the given output and has not had its router ID set manually, what value will OSPF use as its router ID? A. 192.168.1.1 B. 172.16.1.1 C. 1.1.1.1 D. 2.2.2.2 View AnswerAnswer: D Explanation: If a router-id is not configured manually in the OSPF routing process the router will automatically configure a router-id determined from the highest…
Q1. - (Topic 7) Two hosts are attached to a switch with the default configuration. Which statement about the configuration is true? A. IP routing must be enabled to allow the two hosts to communicate. B. The two hosts are in the same broadcast domain. C. The switch must be configured with a VLAN to allow the two hosts to communicate. D. Port security prevents…
Q1. - (Topic 5) Select two options which are security Issues which need to be modified before RouterA is used? (Choose two.) A. unencrypted weak password is configured to protect privilege mode B. inappropriate wording in banner message C. the virtual terminal lines have a weak password configured D. virtual terminal lines have a password, but it will not be used E. configuration supports un-secure web…
Q1. - (Topic 5) Refer to the exhibit. For security reasons, information about RTA, including platform and IP addresses, should not be accessible from the Internet. This information should, however, be accessible to devices on the internal networks of RTA. Which command or series of commands will accomplish these objectives? A. RTA(config)#no cdp run B. RTA(config)#no cdp enable C. RTA(config)#interface s0/0 RTA(config-if)#no cdp run D. RTA(config)#interface s0/0…
Q1. - (Topic 3) Which one of the following IP addresses is the last valid host in the subnet using mask 255.255.255.224? A. 192.168.2.63 B. 192.168.2.62 C. 192.168.2.61 D. 192.168.2.60 E. 192.168.2.32 View AnswerAnswer: B Explanation: With the 224 there are 8 networks with increments of 32 One of these is 32 33 62 63 where 63 is broadcast so 62 is last valid host out of given choices. Q2.…
Q1. - (Topic 5) Refer to the exhibit. A user cannot reach any web sites on the Internet, but others in the department are not having a problem. What is the most likely cause of the problem? A. IP routing is not enabled. B. The default gateway is not in the same subnet. C. A DNS server address is not reachable by the PC. D. A DHCP server…
Q1. - (Topic 2) Refer to the exhibit. How many collision domains are shown? A. one B. two C. three D. four E. six F. twelve View AnswerAnswer: B Explanation: Hubs create single collision and broadcast domains, so in this case there will be a single collision domain for each of the two hubs. Q2. - (Topic 3) If an Ethernet port on a router was assigned an IP address of 172.16.112.1/20, what…
Q1. - (Topic 7) Which network topology allows all traffic to flow through a central hub? A. bus B. star C. mesh D. ring View AnswerAnswer: B Q2. - (Topic 3) What is the default administrative distance of the OSPF routing protocol? A. 90 B. 100 C. 110 D. 120 E. 130 F. 170 View AnswerAnswer: C Explanation: Default Distance Value Table This table lists the administrative distance default values of the protocols that Cisco supports: If…
Q1. - (Topic 7) Which statement about native VLAN traffic is true? A. Cisco Discovery Protocol traffic travels on the native VLAN by default B. Traffic on the native VLAN is tagged with 1 by default C. Control plane traffic is blocked on the native VLAN. D. The native VLAN is typically disabled for security reasons View AnswerAnswer: B Q2. - (Topic 3) A network administrator is troubleshooting…
Q1. CORRECT TEXT - (Topic 6) View AnswerAnswer: Router>enable Router#config terminal Router(config)#hostname Apopka 2) Enable-secret password (cisco10): Apopka(config)#enable secret cisco10 3) Set the console password to RouterPass: Apopka(config)#line console 0 Apopka(config-line)#password RouterPass Apopka(config-line)#login Apopka(config-line)#exit 4) Set the Telnet password to scan90: Apopka(config)#line vty 0 4 Apopka(config-line)#password scan90 Apopka(config-line)#login Apopka(config-line)#exit 5) Configure Ethernet interface (on the right) of router Apopka: The subnet mask…
Q1. - (Topic 1) Refer to the topology and switching table shown in the graphic. Host B sends a frame to Host C. What will the switch do with the frame? A. Drop the frame B. Send the frame out all ports except port 0/2 C. Return the frame to Host B D. Send an ARP request for Host C E. Send an ICMP Host Unreachable message…
Q1. - (Topic 3) Refer to the exhibit. If the resume command is entered after the sequence that is shown in the exhibit, which router prompt will be displayed? A. Router1> B. Router1# C. Router2> D. Router2# View AnswerAnswer: C Explanation: After resuming the telnet session by using the Enter key after it has been suspended, it will resume back to the telnet session so it will be back…
Q1. - (Topic 2) Which address type does a switch use to make selective forwarding decisions? A. Source IP address B. Destination IP address C. Source and destination IP address D. Source MAC address E. Destination MAC address View AnswerAnswer: E Explanation: Switches analyze the destination MAC to make its forwarding decision since it is a layer 2 device. Routers use the destination IP address to make forwarding decisions. Q2.…
Q1. DRAG DROP - (Topic 4) Various protocols are listed on the left. On the right are applications for the use of those protocols. Drag the protocol on the left to an associated function for that protocol on the right. (Not all options are used.) View AnswerAnswer: Q2. - (Topic 3) Which address are OSPF hello packets addressed to on point-to-point networks? A. 224.0.0.5 B.…
Q1. - (Topic 3) On a live network, which commands will verify the operational status of router interfaces? (Choose two.) A. Router# show interfaces B. Router# show ip protocols C. Router# debug interface D. Router# show ip interface brief E. Router# show start View AnswerAnswer: A,D Explanation: Only two commands “show interfaces” and “show ip interface brief” reveal the status of router interfaces (up/up, for example). Q2. - (Topic 3) Which…