Introducing The New!
Surepassexam Collection
Get Unlimited Access to all
Surepassexam's PREMIUM files
Q1. - (Topic 4)
Scenario: A Citrix Administrator needs to change Provisioning Services from PXE to TFTP. During the migration on a newly created VLAN, the administrator receives this error message:
Boot device not found.
Which two DHCP server options should the administrator set to allow the virtual machines to start up from the vDisk? (Choose two.)
A. 60
B. 66
C. 67
D. 69
Answer: A,D
Q2. - (Topic 1)
Scenario: An application that renders locally and creates a large number of temporary files on the local drive is installed on the Desktop OS machines. A Citrix Administrator creates a vDisk in Private mode with this application installed. The administrator is in the process of updating a vDisk from Private mode to Standard mode and needs to determine the write cache type.
Which cache type would provide the best performance?
A. Cache on server
B. Cache on device hard drive
C. Cache on device hard drive encrypted
D. Cache in device RAM with overflow on hard disk
Answer: D
Q3. - (Topic 1)
Scenario: In a XenDesktop deployment, a Citrix Administrator must install an application that renders locally and creates a large number of temporary files on the local drive of Desktop OS machines. The administrator creates a vDisk in Private mode that contains the application. Now the administrator must change the vDisk mode from Private to Standard.
The administrator must also determine the appropriate write cache type to configure.
Which cache type will likely result in system failures with a blue screen of death?
A. Cache on server
B. Cache in device RAM
C. Cache on server persisted
D. Cache in device RAM with overflow on hard disk
Answer: D
Q4. CORRECT TEXT - (Topic 5)
Scenario: CCH acquired Xirtic, and a Citrix Administrator has created a domain trust between the two organizations. Xirtic has an existing XenDesktop deployment, which consists of a site named Xirtic and one Delivery Controller named XRT01. A Citrix Administrator is tasked with integrating Xirtic's XenDesktop deployment into CCH's XenDesktop deployment. Within CCH's environment, communication to and from XRT01 must go over HTTP and must use port 80.
At the moment, both Xirtic and CCH users log into their respective environments by entering their domains and usernames, for example: domain\username. The administrator has been instructed to ensure users can log in using their usernames only or without the need to authenticate when using Citrix Receiver when possible.
Note the following:
If a new store is created, the display name of the Delivery Controller in the new
store should be "Xirtic".
If a new Delivery Controller is added to the existing store, the display name of the
new Delivery Controller should be "Xirtic".
If the Delivery Controller setting in the existing store is modified to merge the CCH
and Xirtic Delivery Controllers, the display name of the Delivery Controller should
be "Xirtic".
All systems in the CCH environment are members of the CCH domain.
All systems in the Xirtic environment are members of the Xirtic domain.
Use hostnames only when configuring settings in this simulated environment; do
not assume the FQDN.
Tasks:
1. Configure StoreFrontto integrate Xirtic's environment into the CCH environment.
2. Configure user access to meet the requirements outlined in the scenario.
Answer: Review the steps and solution in explanation below.
Q5. - (Topic 2)
Scenario: Employees in an organization work two separate shifts and use pooled-random Desktop OS machines. When employees working at night end their shift, they disconnect from their Desktop OS machines. When employees working the day shift log on, their Desktop OS machines are NOT available.
What could a Citrix Administrator do to resolve this issue?
A. Configure the 'Reboot Schedule' in Citrix policies.
B. Set 'When Disconnected' to Suspend during peak hours.
C. Set 'When Disconnected' to Shutdown during peak hours.
D. Adjust Power Management settings in the Active Directory Group Policy.
Answer: D
Q6. - (Topic 4)
Scenario: While attempting to add machines to a Session Machine Catalog using Machine Creation Services, a Citrix Administrator receives an error message.Click on the Exhibit button to view the error message.
In which Citrix Studio node should the administrator go to resolve this error?
A. Hosting
B. Controllers
C. Configuration
D. Machine Catalogs
Answer: A
Q7. - (Topic 1)
Scenario: Due to changes in the network infrastructure, the IP addresses of the Delivery Controllers will be changing. There are 2000 Desktop OS machines in the environment.
What should a Citrix Administrator do to reduce the impact of the IP address changes on the environment?
A. Update the beacons in StoreFront to reflect the updated IP addresses.
B. Change the DNS entries for the Delivery Controllers to the new IP addresses.
C. Run the Provisioning Services Configuration Wizard and update the IP addresses of the Delivery Controllers.
D. Remove the Delivery Controller from the site, change the host file entries, and add the Delivery Controller back to the site.
Answer: B
Q8. - (Topic 1)
Scenario: A Citrix Administrator uses Machine Creation Services to manage XenDesktop
7.6 in an organization. One Delivery Group currently deploys 100 pooled-random Desktop OS machines. The administrator increased the number of Desktop OS machines in the machine catalog to 150. After increasing the number of machines, only 100 users are able to log in to the pooled-random Desktop OS machines.
Which additional step must the administrator take to ensure 150 users are able to log in simultaneously to 150 Desktop OS machines?
A. Power on the newly added machines.
B. Join the new machines to the domain.
C. Add the new machines to the Delivery Group.
D. Remove the new Desktop OS machines from maintenance mode.
Answer: C
Q9. - (Topic 3)
Scenario: When a Citrix Administrator attempts to shadow a user connected to a Desktop OS machine, the following error is displayed:
Failed to initiate Remote Assistance
What could be the cause of this issue?
A. Remote Assistance is NOT enabled on the host machine.
B. The administrator created a firewall exception for port 3398.
C. The administrator added Citrix Director to the Intranet Zone trusted sites.
D. The administrator does NOT have the proper scope for the user's Desktop OS machine.
Answer: A
Q10. - (Topic 4)
Scenario: Users of the Human Resource (HR) user group report that one of their applications is NOT being personalized. A Citrix Administrator discovers that the application writes user-specific data in %programfiles%\HR\%username%.
Which policy could the administrator configure to enable personalization of this application?
A. Folders to mirror
B. Path to user store
C. Directories to synchronize
D. Path to cross platform settings store
Answer: C
Q11. - (Topic 1)
Scenario: A Citrix Administrator is managing a XenDesktop environment for a call center consisting of 2000 users. Users work three different shifts during the day. XenDesktop has been implemented so that each user gets access to a non-persistent Desktop OS machine provisioned using Provisioning Services. The Citrix Universal Print Server has been deployed to optimize printing in this environment. Corporate policy mandates that all users must print using the Universal Print Server. The administrator wants to deploy a new printer into the environment.
Which action should the administrator take to make the new printer driver available to the users in this environment?
A. Install the printer driver on the Print Server.
B. Install the printer driver onto the vDisk and deploy the updated vDisk.
C. Install the printer driver on the Provisioning Services server with 'Enable printer management' selected in the vDisk properties.
D. Install the printer driver on the Delivery Controller and use PowerShell cmdlets to replicate the drivers to all Desktop OS machines.
Answer: A
Q12. - (Topic 2)
What should a Citrix Administrator create before configuring Power Management for a desktop group?
A. A policy
B. A hosting connection
C. An Administrator with the Host Administrator role
D. An Administrator with the Machine Catalog Administrator role
Answer: B
Q13. - (Topic 1)
Scenario: Newly hired employees report they are NOT able to connect to their Desktop OS machines. Some of the employees have provided screenshots that show an error message indicating that no license is available. The license console shows that all device/user licenses have been allocated. Three weeks ago the company sold a subsidiary, freeing up 100 licenses, so the IT team is certain that licenses are available.
Which command-line interface utility should a Citrix Administrator use to address this issue?
A. lmdiag.exe
B. lmdown.exe
C. udadmin.exe
D. lmadmin.exe
Answer: C
Q14. - (Topic 4)
Scenario: Users complain that they are NOT able to print to the new special barcode printers attached to their client devices. However, they can print to other mapped printers.
What should a Citrix Administrator do to resolve this issue?
A. Configure the Printer Assignments policy setting.
B. Set the Client printer redirection policy to Allowed.
C. Configure Default Print Flags on the Desktop OS machines.
D. Pre-stage manufacturer-provided printer drivers on the Desktop OS machines using pnputil.exe.
Answer: D
Q15. - (Topic 4)
Scenario: A user needs two Desktop OS machines from the same group open at once. When the user attempts to launch a second Desktop OS machine, the first Desktop OS machine closes and another is launched.
What could a Citrix Administrator edit to resolve this issue?
A. Properties of the Delivery Group
B. Web.config file on the StoreFront server
C. Properties of the Desktop OS machine catalog
D. Virtual Delivery Agent settings on the Desktop OS machines
Answer: D