IBM 1Y0-204 Free Practice Questions

NEW QUESTION 1
What are three daily steps a Citrix Administrator should take to monitor a Citrix Virtual Apps and Desktops infrastructure? (Choose three.)

• A. Review Citrix policies.
• B. Perform a capacity assessment.
• C. Test environment access.
• D. Check virtual machine power states.
• E. Review available Citrix software upgrades.
• F. Check for warnings or alerts with Citrix Director.

Answer: CDF

NEW QUESTION 2
Which PowerShell command should a Citrix Administrator run to obtain the name of a deployment, the local host cache configuration and the license level?

• A. Get-BrokerCatalog
• B. Get-BrokerController
• C. Get-BrokerResource
• D. Get-BrokerSite

Answer: D

NEW QUESTION 3
Scenario: A Ctrix Administrator currently manages a Citrix ADC environment in a retail company that is growing quickly and may soon double its volume of business. Currently, a Citrix ADC MPX 5550, which handles web and SSL transactions, is in place, but is close to full capacity. Due to the forecasted growth
increase, the administrator needs to find a cost effective solution.
What can the administrator recommend to management in order to cost effectively handle the growth?

• A. Another MPX 5550 appliance
• B. Performance hardware upgrade to Citrix ADC SDX 14100
• C. Perform license upgrade to Citrix ADC MPX 5650
• D. Perform hardware upgrade to Citrix ADC MPX 8005

Answer: C

NEW QUESTION 4
How can a Citrix Administrator enable the ability to monitor application failures for Desktop OS machines running the Virtual Delivery Agent (VDA)?

• A. By installing an Application Probe Agent on the Desktop OS VDA machines
• B. By entering a PowerShell command on a Delivery Controller
• C. By upgrading to premium licenses
• D. By configuring a Citrix policy

Answer: B

NEW QUESTION 5
Scenario: Users report that they are receiving new sessions instead of reconnecting to their disconnected sessions. A Citrix Administrator investigates the issues and finds the sessions are in a disconnected state when the users leave work.
What should the administrator configure to allow the users to reconnect to their disconnected sessions while roaming?

• A. Session Pre-launch
• B. Workspace Control
• C. Session Lingering
• D. Session Timeout

Answer: B

NEW QUESTION 6
Scenario: A Citrix Administrator needs to review the current state of specific machine sessions and application instances that are running in a Citrix Virtual Apps and Desktops Site. The administrator also needs to power-manage sessions. The Site is a premium licensed Site.
Where should the administrator navigate to within Citrix Director to obtain this information?

• A. Filters
• B. Trends
• C. Dashboard
• D. Alerts

Answer: A

NEW QUESTION 7
What are three valid ways to configure Virtual Delivery Agent (VDA) registration? (Choose three.)

• A. CONFIG.XML file
• B. Group Policy Object (GPO)
• C. Organizational Unit (OU) based Controller discovery
• D. DHCP Options
• E. MCS-based PERSONALITY.INI

Answer: BCE

NEW QUESTION 8
Which feature can a Citrix Administrator use to create a consistent set of front-end SSL parameters across multiple SSL virtual servers?

• A. SSL Profile
• B. SSL Bridge
• C. SSL Offload
• D. SSL Policy

Answer: A

NEW QUESTION 9
Scenario: A Citrix Administrator configured the HTTP_Callout feature on the Citrix ADC using the command-line interface. After configuring the commands, the device is facing the HTTP callout recursion
issue.
Click on the ‘Exhibit’ button to view the screenshot of the command-line interface.

How will the administrator rectify the issue?

• A. Change the expression of the Responder policy to “HTTP.REQ.HEADER(”Request”).EQ(”Callout Request”).NOT && SYS.HTTP_CALLOUT(myCallout).CONTAINS(”IP Matched”)”
• B. Change the expression of the Responder policy to “HTTP.REQ.HEADER(”Request”).EQ(”Callout Request”).NOT && SYS.HTTP_CALLOUT(myCallout).CONTAINS(”IP Matched”)”.NOT
• C. In the HTTP Callout policy, change the –parameters to “cip(CLIENT.IP.SRC)&&HTTP.REQ.HEADER(”Request”).EQ(”Callout Request”)”
• D. In the HTTP Callout policy, change the –parameters to “cip(CLIENT.IP.DST)&&HTTP.REQ.HEADER(”Request”).EQ(”Callout Request”)”

Answer: B

NEW QUESTION 10
A Citrix Administrator configured the Responder policy to redirect the request for root page to the home page.
However, after executing the command, the webpage access entered a loop, as shown in the second screenshot.
Click on the ‘Exhibit’ buttons to view the screenshots.


How will the administrator rectify this issue?

• A. Change Responder action expression to “/”
• B. Change Responder Policy expression to http.REQ.URL.Contains(“/”)
• C. Change Responder Action expression to http.REQ.URL
• D. Change Responder Policy expression to http.REQ.URL.EQ(“/”)

Answer: D

NEW QUESTION 11
Which PowerShell command can be used to display all the Citrix services installed on the Delivery Controller?

• A. Get-Service -DisplayName *site*
• B. Get-Service -DisplayName *citrix*
• C. Get-Service -DisplayName *controller*
• D. Get-Service -DisplayName *broker*

Answer: B

NEW QUESTION 12
Scenario: A Citrix Administrator is concerned about the amount of health checks the Citrix ADC is sending to the backend resources. The administrator would like to find a way to remove health checks from specific bound services.
How can the administrator accomplish this?

• A. Use reverse condition monitoring.
• B. Use the No-Monitor option.
• C. Unbind the current monitor.
• D. Use Service Groups to minimize health checks.

Answer: B

NEW QUESTION 13
What is the effect of the “set cs vserver vserver-CS-1 –redirectURL http://www.newdomain.com/mysite/” command?

• A. All the requests without url path /mysite/ will be redirected to http://www.newdomain.com/mysite/.
• B. All the requests to vserver-CS-1 will be redirected to http://www.newdomain.com/mysite/.
• C. If the vserver-CS-1 encounters high connection rate, then users will be redirected tohttp://www.newdomain.com/mysite/.
• D. If the status of vserver-CS-1 is DOWN, then users will be redirected to http://www.newdomain.com/mysite/.

Answer: D

NEW QUESTION 14
Scenario: A Citrix Administrator is in the process of creating a new machine catalog. The administrator discovers that the option to power-manage the catalog is NOT available.
What is causing this issue?

• A. The Site database is offline.
• B. The Virtual Delivery Agent (VDA) is NOT installed on the master image.
• C. The master image has a version older than 7.6 installed on the Virtual Delivery Agent (VDA).
• D. No resource connection is defined in Citrix Studio.

Answer: D

NEW QUESTION 15
A Citrix Administrator has executed the commands in the screenshot on the Citrix ADC using the command-line interface.
Click on the ‘Exhibit’ button to view the screenshot of the command-line interface.

Which two replacements will be the outcome of executing these commands? (Choose two.)

• A. https:// will be replaced by http:// in the HTTP REQUEST
• B. http:// will be replaced by https:// in the HTTP REQUEST
• C. http:// will be replaced by https:// in the HTTP RESPONSE
• D. https:// will be replaced by http:// in the HTTP RESPONSE

Answer: AD

NEW QUESTION 16
Scenario: A Citrix ADC MPX is using one of four 10G ports available in an environment. A Citrix Administrator found a traffic bottleneck at the Citrix ADC.
What can the administrator do to increase bandwidth on the Citrix ADC?

• A. Add another 10G Citrix ADC port to the switch and configure Link Aggregation Control Protocol (LACP).
• B. Purchase another Citrix ADC MPX appliance.
• C. Add two more 10 Citrix ADC ports to the network and configure VLAN.
• D. Plug another 10G Citrix ADC port into the router.

Answer: A

NEW QUESTION 17
Scenario: A Citrix Administrator has deployed machines using Machine Creation Services (MCS). A user logs on to a desktop from a random/non-persistent pool of Windows 10 desktops. During the session, the user installs Microsoft Office 2021.
To which disk is the Microsoft Office installation data written during the session?

• A. Differencing
• B. Identity
• C. Temporary
• D. Personal

Answer: A

NEW QUESTION 18
Which step does a Citrix Administrator need to take to enable Citrix XML Service trust for user access within a Citrix Virtual Apps and Desktops infrastructure?

• A. Enable XML Service trust using the StoreFront console.
• B. Run the Set-BrokerSite -TrustRequestsSentToTheXMLServicePort $true PowerShell command from within a Virtual Delivery Agent (VDA) machine.
• C. Run the Set-BrokerSite -TrustRequestsSentToTheXMLServicePort $true PowerShell command from within a Controller.
• D. Configure the appropriate XML Service trust settings using HDX policy within Citrix Studio.

Answer: C

NEW QUESTION 19
A user calls the help desk and states that launching a pooled random desktop takes as long as five minutes. Which Citrix Director report can a Citrix Administrator review to find out what might be causing the delay?

• A. Resource Utilization
• B. Connection Failures
• C. Logon Performance
• D. Load Evaluators

Answer: C

NEW QUESTION 20
A Citrix Administrator receives complaints from some users that authentication for the Citrix Gateway site fails.
Which tool can the administrator use to find data regarding time of failure and a list of users facing this issue?

• A. Gateway Insight
• B. Security Insight
• C. Web Insight
• D. HDX Insight

Answer: A

NEW QUESTION 21
Which console can a Citrix Administrator use to provide customized permissions to a junior administrator for adding applications?

• A. Citrix Studio
• B. StoreFront
• C. Citrix Director
• D. Citrix Application Delivery Management

Answer: A

NEW QUESTION 22
......