Citrix 1Y0-240 Free Practice Questions

NEW QUESTION 1
Click on the ‘Exhibit’ button to view the screenshot of the command-line interface.

How will the HTTP request “http://10.107.149.233/url1” be redirected based on the screenshot?

• A. The request will be dropped at CS vServer.
• B. The request will be sent to LB_vserver2.
• C. The request will be sent to lb_vsrv_www.
• D. The request will be sent to LB_vserver1.

Answer: A

NEW QUESTION 2
Which three authentication types can a Citrix Administrator use for NetScaler AAA dual- factor authentication? (Choose three.)

• A. TACACS+
• B. RADIUS
• C. ADFS
• D. LINUX
• E. LDAP

Answer: ABE

NEW QUESTION 3
Scenario: External users are currently experiencing delays while accessing XenApp and XenDesktop through the NetScaler. A Citrix Administrator needs to monitor the ICA connections to gather the performance information from the NetScaler Management and Analytics System (MAS).
Which two tools can the administrator use to gather information about WAN Latency, DC Latency and Host Delay? (Choose two.)

• A. HDX Insight
• B. Gateway Insight
• C. Web Insight
• D. TCP Insight

Answer: AC

NEW QUESTION 4
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down.
What can the administrator perform to resolve this issue?

• A. Disable Layer 2 mode on a NetScaler instance.
• B. Enable tagging on all interfaces.
• C. Enable Layer 3 mode along with Layer 2 mode.
• D. Enable MAC-based forwarding mode.

Answer: B

NEW QUESTION 5
Users are experiencing resets from the Intranet server website, which is load-balanced through the NetScaler.
Which NetScaler tool can a Citrix Administrator use to troubleshoot the reset issue?

• A. Take a packet trace with nstrace and analyze with WireShark.
• B. View the new nslog from the command-line interface (CLI) to look for packet resets from the NetScaler.
• C. Look in the Event Viewer for packet resets from the NetScaler.
• D. Use the nslog to look for packet resets on the NetScaler.

Answer: B

NEW QUESTION 6
How does the NetScaler communicate that IP-to-MAC address bindings have changed to the switches and routers on the network, when a NetScaler high availability (HA) pair failover occurs?

• A. The NetScaler uses Gratuitous ARPs (GARPs) to update the devices on the network.
• B. The NetScaler uses MAC-based Forwarding to update the routers.
• C. The NetScaler uses Proxy ARP to update the devices on the network.
• D. The NetScaler uses Reverse ARP (RARP) to update the devices on the network.

Answer: B

NEW QUESTION 7
Scenario: An organization has a ‘bring your own device’ (BYOD) policy, so it is NOT feasible to set up proxy settings on each device in the network.
They need to implement NetScaler Secure Web Gateway to intercept all the traffic to block access to URLs serving harmful/insecure content or the URLs that are identified as social networking sites, career, and job search portals.
Which proxy mode of the Secure Web Gateway should be used in this case?

• A. Transparent
• B. Explicit
• C. Advanced
• D. HTTP

Answer: A

NEW QUESTION 8
Which policy will allow a Citrix Administrator to modify all the URLs in the response body from “http://” to “https://” in an SSL offload deployment?

• A. add rewrite action Act1 replace_all “HTTP.RES.BODY(200000)” “”http://”" –pattern“https://”add rewrite policy Pol1 true Act1 NOREWRITE
• B. add rewrite action Act1 replace_all “HTTP.RES.BODY(200000)” “”http:”" –pattern “https://”add rewrite policy Pol1 true Act1 NOREWRITE
• C. add rewrite action Act1 replace_all “HTTP.RES.BODY(200000)” “”https://”" –pattern “http://”add rewrite policy Pol1 true Act1 NOREWRITE
• D. add rewrite action Act1 replace_all “HTTP.RES.BODY(200000)” “”https:”" –pattern “http://”add rewrite policy Pol1 true Act1 NOREWRITE

Answer: A

NEW QUESTION 9
Which mode does a Citrix Administrator need to configure in order to allow the NetScaler to forward any packets that are NOT destined for an IP address that is NOT configured on NetScaler?

• A. USIP
• B. Layer 3 Mode
• C. Layer 2 Mode
• D. MBF

Answer: A

NEW QUESTION 10
Scenario: A Citrix Administrator observes that when the client gets redirected to the URL www.citrix.com/owa/search?q-userbame, an HTTP 503 response is received from the Content Switching vServer.
The relevant configuration is as follows:

How will the administrator correct the issue?

• A. Unbind CS_POL_2
• B. Unbind CS_POL_1
• C. Bind Policy Unbind CS_POL_2 with priority 90
• D. Bind Policy Unbind CS_POL_3 with priority 90

Answer: C

NEW QUESTION 11
Scenario: A Citrix Administrator is executing the following commands on the NetScaler:
add policy dataset Admin_group ipv4
bind policy dataset Admin_group 192.168.149.10 –index 11 bind policy dataset Admin_group 192.168.149.39 –index 12 bind policy dataset Admin_group 192.168.149.49 –index 13 add responder policy POL_1
“!(CLIENT.IP.SRC.TYPECAST_TEXT_T.CONTAINS_ANY(”Admin_group”))” RESET
bind lb vserver ln_vsrv_www –policyName POL_1 –priority 100 –gotoPriorityExpression END –type REQUEST
What will be the effect of these commands?

• A. All the traffic from users with a source IP address of 192.168.149.10, 192.168.149.39, or 192.168.149.49 will be blocked through the NetScaler.
• B. Only the users with a source IP address of 192.168.149.10, 192.168.149.39, or 192.168.149.49 will be allowed to connect to vserver lb_vsrv_www.
• C. Only the users with a source IP address of 192.168.149.10, 192.168.149.39, or 192.168.149.49 will be blocked when attempting to connect to vserver lb_vsrv_www.
• D. Only the users with a source IP address of 192.168.149.10 or 192.168.149.39 will be allowed to connect to the virtual server.

Answer: B

NEW QUESTION 12
What is the effect of the set gslb parameter – IdnsprobeOrder DNS PING TCP command in an Active/Active Global Server Load Balancing (GSLB) setup?

• A. The order to calculate the Empty Domain Service (EDS) for Dynamic proximity will be the DNS UDP query followed by the PING and then TCP.
• B. The order to calculate the Round-trip time (RTT) for Dynamic proximity will be the DNS UDP query followed by the PING and then TCP.
• C. The order to calculate the Time to live (TTL) proximity will be the DNS UDP query followed by the PING and then TCP.
• D. The order to calculate the Multiple IP responses (MIR) for Dynamic proximity will be the DNS UDP query followed by the PING and then TCP.

Answer: C

NEW QUESTION 13
What is the effect of the set gslb parameter – GSLBvcStateDelayTime 10 command on the Global Server Load Balancing (GSLB) environment, when Metric Exchange Protocol (MEP) is enabled?

• A. The Metric Exchange Protocol (MEP) will be marked as DOWN if the GSLB service has been DOWN for 10 seconds.
• B. The Metric Exchange Protocol (MEP) will be marked as DOWN if the GSLB vServer has been DOWN for 10 seconds.
• C. The GSLB services will be marked as DOWN, if the Metric Exchange Protocol (MEP) connection has been DOWN for 10 seconds.
• D. The GSLB services will be marked as DOWN if the service has been DOWN for 10 seconds.

Answer: C

NEW QUESTION 14
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following consideration apply in the environment:
The administrator can use persistence based on the ___ setting to resolve this issue. (Choose the correct option to complete the sentence.)

• A. Subnet IP
• B. HTTP Cookies
• C. Proximity
• D. SSL Session IDs

Answer: A

NEW QUESTION 15
Scenario: A Citrix Administrator has configured a Responder policy as follows:
add responder action Redirect_Act respond with “DIAMETER.NEW_REDIRECT(”aaa://host.example.com”)”
add responder policy Redirect_Pol “diameter.req.avp(264).value.eq(”host1.example.net”)”
Redirect_Act
bind lb vserver vs1 –policyName Redirect_Pol –priority 10 –type REQUEST What will be the effect of this configuration?

• A. Response originated from “host.example.net” will be redirected to “host1.example.com”.
• B. Request originated from “host.example.net” will be redirected to “host1.example.com”.
• C. Response originated from “host1.example.net” will be redirected to “host.example.com”.
• D. Request originated from “host1.example.net” will be redirected to “host.example.com”.

Answer: B

NEW QUESTION 16
Which scenario will cause automatic high availability (HA) synchronization to fail?

• A. Different build versions
• B. Manually forced synchronization
• C. A force failover
• D. A configuration change to the primary NetScaler

Answer: B

NEW QUESTION 17
Scenario: A Citrix Administrator used the commands in the screenshot to apply the user- agent check to all the virtual servers. However, the administrator observed that it is NOT being applied to the vServer lb_vsrv_www.
Click on the ‘Exhibit’ button to view the screenshot of the command-line interface.

What can be causing this issue?

• A. Pattern set is being used with global policies.
• B. Logging action is bound to the Responder policy.
• C. The bind type of the policy drop is Default Global.
• D. Two responder policies are bound to same vServer.

Answer: D

NEW QUESTION 18
Scenario: A Citrix Administrator needs to implement a Content Filter policy to ensure the following conditions are met:
Which policy expression will meet this requirement if the policy action is RESET and the policy is bound to the server (VIP:10.10.10.1)?

• A. REQ.IP.SOURCEIP != 10.100.32.211 || REQ.IP.SOURCEIP != 10.100.32.211 –netmask 255.255.255.0
• B. REQ.IP.SOURCEIP = = 10.100.32.211 || REQ.IP.SOURCEIP != 10.100.32.0 –netmask 255.255.255.0
• C. REQ.IP.SOURCEIP != 10.100.32.211 && REQ.IP.SOURCEIP = = 10.100.32.0–netmask 255.255.255.0
• D. REQ.IP.SOURCEIP = = 10.100.32.211 && REQ.IP.SOURCEIP != 10.100.32.0–netmask 255.255.255.0

Answer: A