Oracle 1Z0-597 Free Practice Questions

NEW QUESTION 1
After the Logical Domains Manager has been installed, what happens to the original system and instance of Oracle Solaris?

• A. It becomes the control domain
• B. It becomes the first guest domain
• C. It is automatically configured as a service domain
• D. Nothing Logical domains are created on top of the original instance of Oracle Solaris.

Answer: A

Explanation:

Reference:http://docs.oracle.com/cd/E37707_01/html/E29665/newinstallldoms.html(first
para on the page)

NEW QUESTION 2
In planning for the installation of a SPARC T4 server, you notice that a more recent version of a patch is available than what is currently on the EIS-DVD. According to the Enterprise Installation Standards (EIS) methodology, what should you do?

• A. Always install the most recent version of a patch
• B. Delay Installation until the updated patch is published to the EIS-DVD
• C. Do not Install the patch, unless instructed to do so by an EIS-Alert
• D. Never Install patches outside of the EIS-DVD

Answer: A

NEW QUESTION 3
In the OpenBoot PROM environment, you used the“show-children” commandto list the physicaldrives on a specific RAID controller.Theoutput is below. Which command creates a RAID0 volume with targets 9 and a?

• A. 9 a create-raid0-volume
• B. Create raid-volume = 0 9 a
• C. 9 a create-raid-volume = 0
• D. Create raid0-volume = 9 a

Answer: A

Explanation:

Reference:http://docs.oracle.com/cd/E19836-01/E20746/z40001f31395336.html(see step 3)

NEW QUESTION 4
You have printed the partition(slice) informationfor a disk. What type of labeldoes it have?

• A. SMI
• B. EFI
• C. e2label
• D. xfs_admin

Answer: C

NEW QUESTION 5
Power-on self-test (POST) detected a faulty core on a SPARC T4-2 server. The server supports an important internal application for the customer. What is the state of the application and why?

• A. The application is unavailable until the processor with the faulty core has been replaced.
• B. The application is available with limited computing resources since POST disabled the processor with the faulty core.
• C. The application is available since POST disabled the faulty core.
• D. The application is unavailable until the processor with the faulty core has been disabled by the system administrator.

Answer: C

NEW QUESTION 6
If a fault includes a uuid and sunw-msg-id property, then the fault was detected by which of the following?

• A. SunVTS
• B. POST
• C. Solaris Predictive Self-Healing
• D. Oracle ILOM

Answer: C

Explanation:

Reference:http://docs.oracle.com/cd/E19839-01/820-2181-15/820-2181-15.pdf(page 22, see the second row, second column of the table)

NEW QUESTION 7
In the following example, Power OnSelfTest(POST) reports an uncorrectablememory error affectingthe following locations:
/SYS/PM0/CMP0/B0B0/CH1/D0
/SYS/PM0/CMP0/B0B1/CH1/D0
The error wasdetected by POST running on which node, core, and standard?

• A. Node 0, core 7, strand 2
• B. Node 2, core 7, strand 0
• C. Node 7, core 2, strand 0
• D. Node 0, core 2, strand 7

Answer: A

NEW QUESTION 8
According to the Enterprise Installation Standards (EIS) for SPARC T4 servers running Oracle Solaris 10, what steps are required in order to configure the server to use Auto Service Request (ASR)?

• A. 1. Enable ILOM telemetry2. Activate the ASR Asset
• B. 1. Enable SunMC telemetry2. Enable FMA telemetry3. Activate the ASR Asset
• C. 1. Enable SunMC telemetry2. Activate the ASR Asset
• D. 1. Enable ILOM telemetry2. Enable FMA telemetry3. Activate the ASR Asset

Answer: D

NEW QUESTION 9
You have the Oracle ILOM keyswitch_state=standby. What is the Impact ?

• A. The system will power on and run power-on self-test (POST), but Oracle Solaris will not boot.
• B. The system will power on and run power-on self-test (POST), but no flash updates can be made.
• C. The system cannot power on.
• D. The system powers on, but does not run power-on self-test (POST) or boot Oracle Solaris.

Answer: D

NEW QUESTION 10
During installation, what happens if both power supplies are not cabled at the same time on a SPARC T4-2 server?

• A. Nothing
• B. OpenBoot PROM is disabled
• C. The service processor will not power on
• D. The Oracle ILOM will signal a fault

Answer: D

Explanation:

Reference:http://docs.oracle.com/cd/E23075_01/html/E23076/z40004b81409406.html(see the second note on the page)

NEW QUESTION 11
As part of a server consolidation project, a customer would like to run Solaris 9-based applications on a SPARC T4 server. What technology is required?

• A. Oracle VM Server for SPARC
• B. Oracle Solaris Containers
• C. Dynamic Domains
• D. Oracle VirtualBox

Answer: A

NEW QUESTION 12
You have set up power on self test (POST) to run when the scrvrr has been reset by the user. The customer would like POST to run any error-invoked reset. How is this accomplished?

• A. Change the diagnostic level to "max" (user_reset_level = max).
• B. Change the diagnostic trigger to "error reset" (trigger = error-reset).
• C. Change the verbosity to "debug" (user_reset verbosity = debug).
• D. Change the diagnostic trigger to "power on-reset" (trigger = power-on-reset).

Answer: B

NEW QUESTION 13
How is I/O access configured for logical domains with no physical I/O access?

• A. Configured with virtual I/O devices that communicate with the I/O domain, which is not configured as a service domain
• B. Configured with virtual I/O devices that communicate with a service domain
• C. Configured with virtual I/O devices that communicate with the root domain
• D. Configured with virtual I/O devices that communicate with the control domain

Answer: B

Explanation:

Reference: http://docs.oracle.com/cd/E23120_01/html/821-2854/ldomsmanager.html(see virtual input/output, second para, first sentence)

NEW QUESTION 14
On SPARC T4-2 server, if the memory riser has four dual-rank DIMMs, its bandwidth is approximately 94% of the possible maximum. If the memory riser has only two dual-rank DIMMs, what is the approximate bandwidth as a percent of the total bandwidth?

• A. 29%
• B. 35%
• C. 41%
• D. 47%

Answer: D

NEW QUESTION 15
What is Critical Thread Optimization?

• A. The ability to dynamically allocate core resources among active threads
• B. The ability to bind individual threads to a processor
• C. Part of the Processor Sets feature of Oracle Solaris that defines a group of logicalprocessors and schedules threads on them.
• D. Recognized by Oracle Solaris Scheduler as a thread that should run by itself on a single core

Answer: A

NEW QUESTION 16
Below is a list of boot environments available on a SPARCT4 server running Oracle Solaris 11. Which boot environment is currentlybooted?

• A. S11amp
• B. Solaris
• C. Solaris – 151a
• D. Solaris – 174

Answer: D

NEW QUESTION 17
Which two statements are true regarding the Stream processing Unit (SPU) on the SPARC T4 processor?

• A. The SPU is implemented within each processor core.
• B. The SPU is shared across all cores on the processor.
• C. The SPU operates at the same clock speed as the core.
• D. The SPU archives wire-speed performance for encryption only.

Answer: C

Explanation:

Reference:http://www.oracle.com/technetwork/server-storage/sun-netra- carrier/documentation/o11-155-netra-t4-architecture-1451053.pdf(page 8, see stream- processing unit)

NEW QUESTION 18
Using the logical domainconfiguration below,what is the domain and virtual CPU corresponding to physical CPU number 5?

• A. domain primary, virtual CPU number 0
• B. domain primary, virtual CPU number 1
• C. domain ldg2, virtual CPU number 0
• D. domain ldg1, virtual CPU number 1

Answer: D

NEW QUESTION 19
When preparing to update the firmware, which two statements are true?

• A. If performed via the ILOM interface, the firmware file should reside on the system from which the browser is launched.
• B. If performed via the ILOM web interface, a TFTP server is required.
• C. If performed via the ILOM CLI, a TFTP server is required.
• D. Firmware updates can only be performed via the ILOM CLI.

Answer: B

NEW QUESTION 20
Based on the Enterprise Installation Standards (EIS), why should Oracle Explorer Data Collector be run with the “-i” switch after initial system power-on and setup are complete?

• A. To remove confidential customer IP addresses from the Explorer output
• B. To provide a baseline of the initial system configuration
• C. To collect local Intelligent Platform management Interface (IPMI) data
• D. To collect remote Oracle ILOM snapshot data

Answer: C

NEW QUESTION 21
The runs its own embedded operating system.

• A. Logical Domains Manager
• B. Oracle ILOM service processor
• C. OpenBoot PROM
• D. Hardware Management Pack

Answer: B

Explanation:

Reference:http://docs.oracle.com/cd/E18476_01/doc.220/e18478/ilom.htm(ILOM overview, see the para immediately after the bulleted points)

NEW QUESTION 22
......