Oracle 1z0-932 Free Practice Questions

NEW QUESTION 1
You create a public Load Balancer instance and configure a back end set “BES1” with one back end server running a service on port 80. You also create a listener on port 80 and configure that listener to use the back end set “BES1”. A client makes one HTTP request to the Load Balancer with the correct protocol and port.
How many connections does the Load Balancer maintain?

• A. 1
• B. 2
• C. 4
• D. 3

Answer: B

NEW QUESTION 2
You are designing a networking infrastructure in multiple Oracle Cloud Infrastructure regions and require connectivity between workloads in each region. You have created a dynamic routing gateway (DRG) and a remote peering connection. However, your workloads are unable to communicate with each other.
What are two reasons for this? (Choose two.)

• A. The security lists associated with subnets in each virtual cloud network (VCN) do not have the appropriate ingress rules
• B. Identity and Access Management (IAM) policies have not been defined to allow connectivity across the two VCNs in different regions
• C. A local peering gateway needs to be created in each VCN with a default route rule added in the route table forwarding the traffic to the local peering gateway
• D. An Internet gateway needs to be created in each VCN with a default route rule added in the route table forwarding the traffic to the Internet Gateway
• E. The route table associated with subnets in each VCN do not have a route rule defined to forward the traffic to their respective DRGs

Answer: AE

NEW QUESTION 3
For a compute instance that is launched in a private subnet in a Virtual Cloud Network (VCN), which action needs to be performed to connect to the Internet, assuming that the required security list is properly set up?

• A. Assign a Public IP address to the compute instance.
• B. Create and configure Network Address Translation (NAT) in a public subnet and route all traffic to it.
• C. There is no way for an instance in a private subnet to connect to the Internet.
• D. Create a default route entry in the route table to forward all traffic to the Internet gateway.

Answer: B

NEW QUESTION 4
You are planning to deploy a multi-region web application in Oracle Cloud Infrastructure (OCI). You have customers in North America, Asia and Europe who will access the application.
What service is available in OCI to help you choose the regions the lowest latency to these markets?

• A. Internet Intelligence
• B. FastConnect
• C. IPsec VPN
• D. DNS Zone Management

Answer: A

NEW QUESTION 5
Which two options are available when configuring DNS resolution for your virtual cloud network? (Choose two.)

• A. Internet and custom resolver
• B. Google DNS servers
• C. custom resolver
• D. Internet and virtual cloud network (VCN) resolver

Answer: CD

NEW QUESTION 6
Which two choices are true for Autonomous Data Warehouse (ADW)? (Choose two.)

• A. Billing stops only when the ADW is terminated
• B. Billing stops for both CPU usage and storage usage when ADW is stopped
• C. Billing for compute stops when ADW is stopped
• D. Billing for storage continues when ADW is stopped

Answer: CD

NEW QUESTION 7
You are running a mission-critical database in Oracle Cloud Infrastructure (OCI). You take regular backups of your DB system to OCI object storage. Recently, you notice a failed database backup status in the console.
What two steps can you take to determine the cause of the backup failure? (Choose two.)

• A. Ensure the database archiving mode is set to NOARCHIVELOG
• B. Ensure that your database host can connect to the OCI object storage
• C. Restart the dcsagent program if it has a status of stop or waiting
• D. Make sure that the database is not active and running while backup is in progress

Answer: AC

NEW QUESTION 8
Which two statements about fault domains are true? (Choose two.)

• A. A fault domain is a grouping of hardware and infrastructure within an availability domain
• B. Each availability domain contains three fault domains
• C. A failed instance in a fault domain is automatically relaunched
• D. A fault domain is selected automatically based on usage data

Answer: AB

NEW QUESTION 9
Which statement is true about Oracle Cloud Infrastructure Object Storage Service?

• A. An Archive Object Storage tier bucket can be upgraded to the Standard Object Storage tier.
• B. You cannot directly download an object from an Archive Object Storage bucket.
• C. An existing Standard Object Storage tier bucket can be downgraded to the Archive Object Storage tier.
• D. Data retrieval in Archive Object Storage is instantaneous.

Answer: B

NEW QUESTION 10
Which statement is true about cloning a volume?

• A. You need to detach a volume before cloning from it.
• B. A cloned volume is the same as a snapshot that has a dependency on the source volume.
• C. You cannot change the block volume size when cloning a volume.
• D. You can create a clone for a volume across regions.

Answer: B

NEW QUESTION 11
Which two statements are true about Oracle Cloud Infrastructure Compute Service? (Choose two.)

• A. You can launch a virtual or bare metal instance by using the same LaunchInstance API.
• B. You cannot launch a bare metal server in Oracle Cloud Infrastructure Compute Service.
• C. You can attach a block volume in an Availability Domain other than your compute instance.
• D. You can share custom images across tenancies and regions.

Answer: AD

NEW QUESTION 12
Which two are valid options when migrating a database from on-premise to Oracle Cloud Infrastructure? (Choose two.)

• A. snapping or cloning storage form on-premise to Oracle Cloud Infrastructure
• B. performing a backup to Oracle Cloud Infrastructure Object Storage, and then restoring to a database server on Oracle Cloud Infrastructure
• C. performing RMAN backup to an on-premise storage device, and then shipping to Oracle Cloud Infrastructure
• D. converting the Oracle database to a NoSQL database and migrating to Oracle Cloud Infrastructure by using rsync file copy

Answer: AC

NEW QUESTION 13
Which two options are true for Autonomous Transaction Processing (ATP) database? (Choose two.)

• A. You can add/remove Diskgroup in ATP
• B. You can scale storage up or down in ATP
• C. You can scale CPU up or down in ATP
• D. You can add more Pluggable Database for consolidating multiple databases in ATP
• E. You can add new ORACLE_HOME for bringing older versions of on-premises databases to ATP

Answer: BD

NEW QUESTION 14
Which three must be configured for a load balancer to accept incoming traffic? (Choose two.)

• A. a listener
• B. a back-end server
• C. a back end set
• D. a security list that is open on a listener port
• E. a certificate

Answer: ADE

NEW QUESTION 15
Which three load-balancing policies can be used with a back end set? (Choose three.)

• A. Throughput
• B. IP Hash
• C. Weighted Round Robin
• D. CPU Utilization
• E. Least Connections

Answer: BCE

NEW QUESTION 16
Which two actions will occur when a back-end server that is registered with a backend set is marked to drain connections? (Choose two.)

• A. It disallows new connections to that backend server.
• B. It keeps the connections to that instance open and attempts to complete any in-flight requests.
• C. It redirects the requests to a user-defined error page.
• D. It immediately closes all existing connections to that instance.
• E. It forcibly closes all connections to that instance after a timeout period.

Answer: AD

NEW QUESTION 17
Your Operations team has recently created a new, standard image that will be used to launch all new application servers in the Finance compartment. The custom image currently exists in the Operations compartment. You have access to manage all-resources in the Finance compartment and do not have access to the Operations compartment.
Which two methods would make the new image available for you to use when deploying new servers in the Finance compartment? (Choose two.)

• A. Instruct the Operations team to reassign the custom image to the Finance compartment so you can select it from a drop-down list when launching new compute resources.
• B. Instruct the Operations team to export the image to an object storage bucket, create a pre-authenticated request (PAR), and provide you with the UR
• C. Download the custom image to your laptop and import it as a custom image in the Finance compartment.
• D. Instruct the Administrators team to grant you access to use instance-images in the Operations compartmen
• E. Use the Oracle Cloud Identifier (OCID) of the custom image when launching new compute resources in the Finance compartment.
• F. Instruct the Operations team to export the image to an object storage bucket, create a PAR, and provide you with the UR
• G. Use that URL as the source when importing a custom imag
• H. Import the custom image into the Finance compartment.
• I. Instruct the Operations team to export the image to an object storage bucke
• J. Instruct the Administrators team to grant you access to the object storage bucket where the custom image is store
• K. Use the download URL of the custom image as the image source when launching new compute resources in the Finance compartment.

Answer: CE

NEW QUESTION 18
You have successfully configured identity federation between Oracle Cloud Infrastructure (OCI) and Oracle Identity Cloud Services (IDCS). A new project manager wants access to OCI for her team and provides the name of an existing group within IDCS to use when granting access.
How do you configure federation to allow the project team access to OCI resources?

• A. Create a new IAM group in OCI and map it to the existing IDCS grou
• B. Create a new policy in IDCS and reference the name of the IAM group.
• C. Create a new Identity and Access Management (IAM) policy in OCI and reference the name of the IDCS group in each policy statement.
• D. Create a new compartment in OCI with the same name as the existing IDCS grou
• E. Create an IAM policy that references the new compartment and the name of the IDCS group.
• F. Create a new IAM group in OCI and map it to the existing IDCS grou
• G. Create a new IAM policy and reference the name of the IAM group in each policy statement.

Answer: D

NEW QUESTION 19
When creating a subnet, one or more placeholder security lists are often associated with the subnet. Why?

• A. Each operator needs its own security list.
• B. Each protocol needs its own security list.
• C. Each network endpoint or instance in the subnet needs its own security list.
• D. It is not possible to add or remove security lists after a subnet is created.

Answer: C

NEW QUESTION 20
You have provisioned an Autonomous Data Warehouse (ADW) database with 16 enabled OCPUs and need to configure the consumer group for your application.
Which two are true when deciding the number of sessions for each application? (Choose two.)

• A. The MEDIUM and LOW consumer group can run up to 16 concurrent SQL statements if HIGH consumer group has 0 SQL statements
• B. The HIGH consumer group can run up to 16 concurrent SQL statements as long as MEDIUM and LOW consumer groups have 0 SQL statements
• C. The MEDIUM consumer group can run 20 concurrent SQL statements when HIGH consumer group has 0 SQL statements
• D. The HIGH consumer group can run up to 16 concurrent SQL statements in addition to 32 concurrent SQL statements in MEDIUM and LOW consumer group each
• E. The HIGH consumer group can run 3 concurrent SQL statements when MEDIUM consumer group has 0 SQL statements

Answer: CE

NEW QUESTION 21
......