Introducing The New!
Surepassexam Collection
Get Unlimited Access to all
Surepassexam's PREMIUM files
P.S. Actual 200-125 bible are available on Google Drive, GET MORE: https://drive.google.com/open?id=1kYtwvDfK3CIMnjUzKdkde8F69Zg0NhM8
New Questions 12
Which Two options are features of the extended ping command ?
A. it can send packets from a specified interface or ip address
B. it can resolve the destination host name
C. it can ping multiple hosts at the same time
D. it can count the number of hops to the remote host
E. it can send a specified number of packets
Answer: A,E
New Questions 13
Which two things does a router do when it forwards a packet? (Choose two.)
A. determines the next hop on the path
B. switches the packet to the appropriate outgoing interfaces
C. computes the destination host address
D. forwards ARP requests
E. updates the destination IP address
Answer: A,B
New Questions 14
Which statement about upgrading a cisco ios device with TFTP is True ?
A. The Cisco IOS device must be on the same lan as the TFTP server
B. The operation is performed in passive mode
C. The operation is performed in an unencrypted format
D. The operation is performed in active mode
Answer: A
New Questions 15
Refer to the exhibit.
The MAC address table is shown in its entirety. The Ethernet frame that is shown arrives at the switch. What two operations will the switch perform when it receives this frame? (Choose two.)
A. The switch will not forward a frame with this destination MAC address.
B. The frame will be forwarded out of all the ports on the switch.
C. The MAC address of ffff.ffff.ffff will be added to the MAC address table.
D. The frame will be forwarded out of all the active switch ports except for port fa0/0.
E. The MAC address of 0000.00aa.aaaa will be added to the MAC Address Table.
F. The frame will be forwarded out of fa0/0 and fa0/1 only.
Answer: D,E
New Questions 16
Under which circumstance is a router on a stick most appropriate?
A. When the router must route a single across multiple physical links.
B. When the router must route multiple subnets across multiple physical links.
C. When the router must route a single across single physical links.
D. When the router must route multiple subnets across single physical links.
Answer: D
New Questions 17
Which VTP mode prevents you from making changes to vlans?
A. Server.
B. Client.
C. Transparent.
D. Off
Answer: B
Explanation:
VTP Client
u00b7 VTP clients function the same way as VTP servers, but you cannot create, change, or delete VLANs on a
VTP client.
u00b7 A VTP client only stores the VLAN information for the entire domain while the switch is on.
u00b7 A switch reset deletes the VLAN information.
u00b7 You must configure VTP client mode on a switch.
New Questions 18
A network administrator has configured access list 173 to prevent Telnet and ICMP traffic from reaching a server with the address of 192.168.13.26. Which commands can the administrator issue to verify that the access list is working properly? (Choose three.)
A. Router# ping 192.168.13.26
B. Router# debug access-list 173
C. Router# show open ports 192.168.13.26
D. Router# show access-lists
E. Router# show ip interface
Answer: A,D,E
New Questions 19
Which DTP switch port mode allows the port to create a trunk link if the neighboring port is in trunk mode, dynamic desirable mode, or desirable auto mode?
A. trunk
B. access
C. dynamic desirable
D. dynamic auto
Answer: C
New Questions 20
Scenario:
You are a junior network engineer for a financial company, and the main office network is experiencing network issues. Troubleshoot the network issues.
Router R1 connects the main office to the internet, and routers R2 and R3 are internal routers.
NAT is enabled on router R1.
The routing protocol that is enabled between routers R1, R2 and R3 is RIPv2.
R1 sends the default route into RIPv2 for the internal routers to forward internet traffic to R1.
You have console access on R1, R2 and R3 devices. Use only show commands to troubleshoot the issues.
R1 router clock is synchronized with ISP router R2 is supposed to receive NTP updates from R1. But you observe that R2 clock is not synchronized with R1. What is the reason R2 is not receiving NTP updates from R1?
A. The IP address that is used in the NTP configuration on R2 router is incorrect.
B. The NTP server command not configured on R2 router.
C. R2 router Ethernet interface that is connected to R1 is placed in shutdown condition.
D. R1 router Ethernet interface that is connected to R2 is placed in shutdown condition.
Answer: A
Explanation:
Check the below configuration for this
New Questions 21
Which command can you use to test whether a switch supports secure connections and strong authentication?
A. Switch>ssh u2013v 1-I admin 10.1.1.1
B. Router#ssh u2013v1 u2013I admin 10.1.1.1
C. Router>ssh u2013V2 u2013I admin 10.1.1.1
D. Switch#ssh u2013I admin 10.1.1.1
Answer: C
P.S. Easily pass 200-125 Exam with Allfreedumps Actual Dumps & pdf vce, Try Free: https://www.allfreedumps.com/200-125-dumps.html (890 New Questions)