Introducing The New!
Surepassexam Collection
Get Unlimited Access to all
Surepassexam's PREMIUM files
P.S. Highest Quality 200-125 vce are available on Google Drive, GET MORE: https://drive.google.com/open?id=1GYoIP8av070YUllGeTpz9IFUfla_iPR7
Q1. Which command can you enter to view the ports that are assigned to VLAN 20?
A. Switch#show vlan id 20
B. Switch#show ip interface brief
C. Switch#show interface vlan 20
D. Switch#show ip interface vlan 20
Answer: A
Q2. Which component of the Cisco SDN solution serves as the centralized management system?
A. Cisco OpenDaylight
B. Cisco ACI
C. Cisco APIC
D. Cisco IWAN
Answer: C
Explanation:
Cisco ACI is a comprehensiveSDN architecture. This policy-based automation solution supports a business-relevant application policy language, greater scalability through a distributed enforcement system, and greater network visibility. These benefits are achieved through the integration of physical and virtual environments under one policy model for networks, servers, storage, services, andsecurity.
Q3. Which spanning-tree protocol rides on top of another spanning-tree protocol?
A. MSTP
B. RSTP
C. PVST+
D. Mono Spanning Tree
Answer: A
Q4. Which two Cisco IOS commands, used in troubleshooting, can enable debug output to a remote location? (Choose two)
A. no logging console
B. logging host ip-address
C. terminal monitor
D. show logging | redirect flashioutput.txt
E. snmp-server enable traps syslog
Answer: B,C
Q5. Which configuration can you apply to enable encapsulation on a subinterface?
A. interface FastEthernet 0/0 encapsulation dot1Q 30
ip address 10.1.1.30 255.255.255.0
B. interface FastEthernet 0/0.30
ip address 10.1.1.30 255.255.255.0
C. interface FastEthernet 0/0.30 description subinterface vlan 30
D. interface FastEthernet 0/0.30 encapsulation dot1Q 30
ip address 10.1.1.30 255.255.255.0
Answer: D
Q6. Which option describes the purpose of traffic policing?
A. It prioritizes routing protocol traffic.
B. It remarks traffic that is below the CIR
C. It drops traffic that exceeds the CIR.
D. It queues and then transmits traffic that exceeds the CIR.
Answer: C
Explanation:
Traffic policing allows you to control the maximum rate of traffic transmitted or received on an interface. Traffic policing is often configured on interfaces at the edge of a network to limit traffic into or out of the network. In most Traffic Policing configurations, traffic that falls within the rate parameters is transmitted, whereas traffic that exceeds the parameters is dropped or transmitted with a different priority.
Q7. Which two components are used to identify a neighbor in a BGP configuration? (Choose two.)
A. autonomous system number
B. version number
C. router ID
D. subnet mask
E. IP address
Answer: A,E
Explanation:
Use theshow ip bgp neighbors(registeredcustomers only)command to display information about the TCP and Border Gateway Protocol (BGP) connections and verify if the BGP peer is established. The output of theshow ip bgp neighborscommand below shows the BGP state as 'Established', which indicates that the BGP peer relationship has been established successfully.
R1-AGS#show ip bgp neighbors | include BGP
BGP neighbor is10.10.10.2, remote AS 400,internal link
BGP version 4, remote router ID 2.2.2.2 BGP state = Established, up for 00:04:20 BGP table version 1, neighbor version 1 R1-AGS#
Theshow ip bgp neighborscommand has been used above with the modifier| include BGP. This makes the output more readable by filtering the the command output and displaying the relevant parts only.
In addition, theshow ip bgp summary(registeredcustomers only)command can also be used to display the status of all BGP connections, as shown below.
R1-AGS(9)#show ip bgp summary
BGP router identifier 10.1.1.2, local AS number 400 BGP table version is 1, main routing table version 1
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd 10.10.10.2 4 400 3 3 1 0 0 00:00:26 0
Q8. What are the two minimum required components of a DHCP binding? (Choose two.)
A. a DHCP pool
B. an exclusion list
C. a hardware address
D. an IP address
E. an ip-helper statement
Answer: C,D
Q9. Which IPv6 header field is equivalent to the TTL?
A. Hop Limit
B. Flow Label
C. TTD
D. Hop Count
E. Scan Timer
Answer: A
Recommend!! Get the Highest Quality 200-125 dumps in VCE and PDF From Examcollectionplus, Welcome to download: https://www.examcollectionplus.net/vce-200-125/ (New 890 Q&As Version)