Introducing The New!
Surepassexam Collection
Get Unlimited Access to all
Surepassexam's PREMIUM files
P.S. Accurate 200-125 forum are available on Google Drive, GET MORE: https://drive.google.com/open?id=1tmPuPMdbI90mJvs8j7thMAwqkALcwK_i
Q9. Scenario:
You work for a company that provides managed network services, and of your real estate clients running a small office is experiencing network issues, Troubleshoot the network issues.
Router R1 connects the main office to internet, and routers R2 and R3 are internal routers NAT is enabled on Router R1.
The routing protocol that is enable between routers R1, R2, and R3 is RIPv2.
R1 sends default route into RIPv2 for internal routers to forward internet traffic to R1. Server1 and Server2 are placed in VLAN 100 and 200 respectively, and dare still running
router on stick configuration with router R2.
You have console access on R1, R2, R3, and L2SW1 devices. Use only show commands to troubleshoot the issues.
Examine R2 configuration, the traffic that is destined to R3 LAN network sourced from Router R2 is forwarded to R1 instead R3. What could be an issue?
A. RIPv2 routing updates are suppressed between R2 and R3 using passive interface feature.
B. RIPv2 enabled on R3, but R3 LAN network that is not advertised into RIPv2 domain.
C. No issue that is identified; this behavior is normal since default route propagated into RIPv2 domain by Router R1.
D. RIPv2 not enabled on R3.
Answer: D
Q10. Which protocol is the Cisco proprietary implementation of FHRP?
A. HSRP
B. VRRP
C. GLBP
D. CARP
Answer: A
Q11. Which statement about the inside interface configuration in a NAT deployment is true?
A. It is defined globally
B. It identifies the location of source addresses for outgoing packets to be translated using access or route maps.
C. It must be configured if static NAT is used
D. It identifies the public IP address that traffic will use to reach the internet.
Answer: B
Explanation:
This module describes how to configure Network Address Translation (NAT) for IP address conservation and how to configure inside and outside source addresses. This module also provides information about the benefits of configuring NAT for IP address conservation. NAT enables private IP internetworks that use nonregistered IP addresses to connect to the Internet. NAT operates on a device, usually connecting two networks, and translates the private (not globally unique) addresses in the internal network into legal addresses before packets are forwarded onto another network. NAT can be configured to advertise to the outside world only one address for the entire network. This ability provides additional security by effectively hiding the entire internal network behind that one address.
NAT is also used at the enterprise edge to allow internal users access to the Internet and to allow Internet access to internal devices such as mail servers.
Q12. Which NTP command configures the local device as an NTP reference clock source?
A. ntp peer
B. ntp broadcast
C. ntp master
D. ntp server
Answer: D
Q13. After you configure the Loopback0 interface, which command can you enter to verify the status of the interface and determine whether fast switching is enabled?
A. Router#show ip interface loopback 0
B. Router#show run
C. Router#show interface loopback 0
D. Router#show ip interface brief
Answer: A
Q14. Which part of the PPPoE server configuration contains the information used to assign an IP address to a PPPoE client?
A. virtual-template interface
B. DHCP
C. dialer interface
D. AAA authentication
Answer: C
Explanation:
PPPoE is configured as a point to point connection between two Ethernet ports. As a tunneling protocol, PPPoE is used as an effective foundation for the transport of IP packets at the network layer. IP is overlaid over a PPP connection and uses PPP as a virtual dial up connection between points on the network. From the user's perspective, a PPPoE session
is initiated by using connection software on the client machine or router. PPPoE session initiation involves the identification of the Media Access Control (MAC) address of the remote device. This process, also known as PPPoE discovery
Q15. Which logging command can enable administrators to correlate syslog messages with millisecond precision?
A. no logging console
B. logging buffered 4
C. no logging monitor
D. service timestamps log datetime msec
E. logging host 10.2.0.21
Answer: D
Q16. Which standards-based First Hop Redundancy Protocol is a Cisco supported alternative to Hot Standby Router Protocol?
A. VRRP
B. GLBP
C. TFTP
D. DHCP
Answer: A
Q17. Which statement about switch access ports is true?
A. They drop packets with 802.1Q tags.
B. A VLAN must be assigned to an access port before it is created.
C. They can receive traffic from more than one VLAN with no voice support
D. By default, they carry traffic for VLAN 10.
Answer: A
Explanation:
"If an access port receives a packet with an 802.1Q tag in the header other than the access VLAN value, that port drops the packet without learning its MAC source address."
Q18. which three options are switchport configuration that can always avoid duplex mismatch errors between two switches? (Choose three.)
A. Set both sides of the connection to half duplex.
B. Set one side of the connection to auto-negotiate and the other side to full duplex.
C. Set both sides of the connection to auto-negotiate.
D. Set one side of the connection to auto-negotiate and the other side to half duplex.
E. Set one side of the connection to full ruplex and the other side to half duplex.
F. Set both sides of the connection to full duplex.
Answer: A,C,F
Recommend!! Get the Accurate 200-125 dumps in VCE and PDF From Dumpscollection, Welcome to download: http://www.dumpscollection.net/dumps/200-125/ (New 889 Q&As Version)