Cisco 200-150 Free Practice Questions

NEW QUESTION 1
A network engineer is verifying Layer 2 connectivity of a server to a Cisco Nexus switch by checking the Address Resolution table statistics. Which command shows the MAC address, physical interfaced, VLAN and IP address of a server on a Cisco Nexus switch?

• A. show Ip arp interface
• B. show Ip arp
• C. show Ip arp detail
• D. show arp detail

Answer: C

NEW QUESTION 2
Refer to the exhibit.

Cisco USC Manager generates a Call Home fault report. Which action do you take to resolve the issue?

• A. Adjust the Chassis temperature threshold to a higher setting.
• B. Verify that air flow through the Chassis correctly.
• C. Ensure that power cables are connected to the fan assemblies of the UCS.
• D. Remove the equipment that generates excessive hat near the top of the rack

Answer: A

NEW QUESTION 3
How does a GLBP cluster respond to a host ARP request for the virtual IP address?

• A. The highest priority AVF responds by using its own hardware MAC address.
• B. The least utilized router responds by using its own virtual MAC address.
• C. The AVG responds by using one virtual MAC address.
• D. The AVG responds by using its own hardware MAC address.

Answer: A

NEW QUESTION 4
Which statement about the HSRP protocol is true?

• A. Multiple routers in an HSRP group are in an active state, to enable round-robin load balancing of traffic
• B. In Cisco NX-O
• C. HSRP is configured to pre-empt by default
• D. HSRP version 2 is an open standard protocol that is described in RFC 2281
• E. One router in an HSRP group is in an active stat
• F. All other routers are in a standby state or listening state

Answer: C

NEW QUESTION 5
In Cisco NX-OS Software, which command redistributes a route of 0.0.0.0/0 into EIGRP?

• A. default-information originate
• B. default information originate
• C. default information-originate
• D. originate default-information
• E. originate-default information

Answer: A

NEW QUESTION 6
Whichtype of API is used to configure settings on the Cisco Meeting Server?

• A. XML-RPC
• B. SOAP
• C. REST
• D. XMP-RPC

Answer: C

NEW QUESTION 7
What is a function of a call control solution?

• A. To make, monitor and maintain calls.
• B. To join 3 or more participants in a meeting.
• C. To schedule calls.
• D. To provide an audio and video interface for the user.

Answer: A

NEW QUESTION 8
Which three options describe routers compared to switches? (Choose three.)

• A. use IP address tables for information lookup
• B. concerned with packet forwarding
• C. operate at Layer 3 of the OSI model
• D. operate at Layer 2 of the OSI model
• E. use MAC address tables for information lookup
• F. concerned with the local delivery of frames

Answer: ABC

NEW QUESTION 9
If a Nexus switch receives a frame and no MAC table entry is found for the destination, what will take place?

• A. The frame will be dropped.
• B. The frame will be flooded.
• C. The sender will be notified.
• D. The destination address will be learned.

Answer: B

NEW QUESTION 10
A network design team has mandated that IP-only routing protocols be used in the network. Which two routing protocols will they want to use? (Choose two.)

• A. BGP
• B. OSPF
• C. RP
• D. EIGRP
• E. IS-IS

Answer: BD

Explanation: https://en.wikipedia.org/wiki/IS-IS

NEW QUESTION 11
What is a unique feature of Expressway?

• A. Persistent content available to room participants.
• B. Message, meet and calling for cloud-based solutions.
• C. Advanced video routing on video-only networks.
• D. Support of unified communications with contact center

Answer: C

NEW QUESTION 12

Refer to the exhibit. Which command allows the Cisco Nexus 5000 switch to continue to start up?

• A. switch(boot)# load n5000-uk9.5.2.1.N1.4.bin
• B. switch(boot)# configure terminalswitch(boot-config)# admin-password Cisco123
• C. switch(boot)# load n5000-uk9-kickstart.5.2.1.N1.4.bin
• D. switch(boot)# load system-latest

Answer: A

NEW QUESTION 13
Refer to the exhibit.

Which result command is true?

• A. All broadcast traffic is suppressed on Ethernet 1/1.
• B. All broadcast and multicast traffic is allowed on Ethernet 1/1.
• C. All broadcast traffic is allowed on Ethernet 1/1.
• D. All broadcast and multicast traffic is suppressed on Ethernet E1/1.

Answer: A

NEW QUESTION 14
Which statement about SAN zooming is true?

• A. Describes can belong to more than one zone.
• B. zones must be the same size.
• C. zone membership can be configured only on a pWWN basis.
• D. Hard zoning can be disabled

Answer: A

NEW QUESTION 15
Which two descriptions of NPV are true? (Choose two.)

• A. It must be configured on all hosts that connect to the NPV switch.
• B. lt reduces the number of domain IDs in a fabric.
• C. It combines locally connected N Ports into a single uplink.
• D. It assigns multiple Fibre IDs to a single Port.
• E. It is deployed to a VM by using Cisco UCS Manager.

Answer: BD

NEW QUESTION 16
What is the only WebEx product that can used in a CMR Cloud solution?

• A. Cisco WebEx Support Center
• B. Cisco WebEx Training Center
• C. Cisco WebEx Meeting Center
• D. Cisco WebEx Event Center

Answer: C

NEW QUESTION 17
Refer to the exhibit.

Which type of network communication is depicted?

• A. TCP packet
• B. EEE 802.3 with LLC frame
• C. Ethernet frame
• D. EEE802.3 with SNAP frame

Answer: A

NEW QUESTION 18
Which protocol is used to encapsulate Fibre Channel frames, enabling them to be transmitted over Ethernet networks?

• A. FCoE
• B. DCB
• C. SCSI
• D. Ethernet SAN

Answer: A

NEW QUESTION 19
Before you configure an SVI on a Cisco Nexus Series switch, which command must you enter?

• A. Feature pim
• B. feature ospf
• C. feature interface-vlan
• D. feature private-vlan

Answer: C