Cisco 200-150 Free Practice Questions

NEW QUESTION 1
The MAC address table on a Cisco Nexus Server switch is full .What Layer 2 network behavior will occur while the network MAC address table remains full?

• A. All frames will be flooded.
• B. Frames with an unknown destination address will be flooded.
• C. The switch reset the Mac address tabl
• D. removin all MAC addresses.
• E. The stitch will remove all dynamically MAC address from the table

Answer: B

NEW QUESTION 2
A customer requires two separate physical pathways between multiple initiators and multiple targets. Which technology meets this requirement on a single Cisco MDS9148 switch?

• A. zoning
• B. port security
• C. LUN masking
• D. VSANs

Answer: D

NEW QUESTION 3
When comparing TCP and UDP segments, which two fields are found only in TCP segment? (Choose two.)

• A. Checksum
• B. acknowledgement
• C. length
• D. source
• E. Sequence number

Answer: DE

NEW QUESTION 4
Which two are Fibre Channel topologies? (Choose two.)

• A. spine and leaf topology
• B. port-to-port
• C. port-to-multipoint
• D. star topology
• E. arbirated loop

Answer: BD

NEW QUESTION 5
An engineer is configuring a new MDS switch. The switch is powered on, the customer connects to the console, and the initial setup script is started.
Which two items can be configured during this setup process?

• A. default port-channel mode
• B. default port VSAN membership
• C. default switch port interface state
• D. default zone mode
• E. default storage VDC

Answer: CD

NEW QUESTION 6
At which layer of the OSI model does TCP operate?

• A. 1
• B. 2
• C. 3
• D. 4
• E. 5

Answer: D

Explanation: http://en.wikipedia.org/wiki/OSI_model

NEW QUESTION 7
Which is an endpoint supported by Cisco Unified Communications Manager?

• A. Legacy H 323 endpoints
• B. CMAClients
• C. immersive Telepresence endpoints
• D. Jabber Video

Answer: C

NEW QUESTION 8
What is the maximum distance that is supported by Cisco passive Twinax cables?

• A. 5m
• B. 3m
• C. 4m
• D. 10m

Answer: A

NEW QUESTION 9
How many simultaneously HD calls can be supported on a Cisco Meeting Server 1000?

• A. 108
• B. 48
• C. 24
• D. 96

Answer: D

NEW QUESTION 10
Which Cisco WebEx Center has program end campaign management?

• A. Cisco WebEx Event Center
• B. Cisco WebEx Support Center
• C. Cisco WebEx Meeting Center
• D. Cisco WebEx TrainingCenter

Answer: A

NEW QUESTION 11
Which two protocols can you use SAN storage that is accesses via low-latency, high-bandwidth networking?
(Choose two.)

• A. AFP
• B. CIFS
• C. NFS
• D. FCP
• E. iSCSI

Answer: BC

NEW QUESTION 12
Refer to the exhibit.

You must attack a strong peripheral to a Cisco Nexus 5000 Series Switch. Which type of port do you use?

• A. E
• B. F
• C. TE
• D. NP

Answer: B

NEW QUESTION 13
Which description of a vFC interface is true?

• A. It can be associated to more than one VSAN
• B. It must be bound to an FCoE-enabled Ethernet or EtherChannel interface.
• C. It can be associated to a private VLAN
• D. It can be associated to an FCoE VLAN

Answer: B

Explanation: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/fcoe/513_n1_1/b_Cisco_n5k_fcoe_co

NEW QUESTION 14
What is the maximum working distance of a 1000BASE-ZE SFP transceiver when ordinary single mode fiber?

• A. up to 70 kilometers
• B. up to 40 kilometers
• C. up to 550 meters
• D. up to 10 kilometers

Answer: A

Explanation: The Cisco GLC-ZX-SM operates on ordinary single mode fiber optic link spans of up to 70 km in length. (
http://www.cisco.com/c/en/us/products/interfaces-modules/1000base-zx-sfp/index.html)

NEW QUESTION 15
The nWWN is assigned to which SANfabric component?

• A. a Fibre Channel adapter
• B. a disk
• C. an SFP module
• D. a Fibre Channel interface

Answer: D

NEW QUESTION 16
When you enter the feature npv command on a storage-capable switch from Cisco, what is the result?

• A. N-port Virtualization is enabled without rebooting.
• B. the switch erases the current configuration before it enables the feature N-port Virtualization.
• C. The switch reloads and erases the current configuration before it enables the feature N-port Virtualization.
• D. N-port ID Virtualization is enabled without rebooting.

Answer: C

NEW QUESTION 17
For witch reason would you implement a VSAN?

• A. to overcome the limitation of zoing
• B. to virtualize storage
• C. to segment the physical fabric into multiple logical fabrics
• D. to overcome the limitations of LUN masking

Answer: C

NEW QUESTION 18
Which description of a multiple-initiator target zone is true?

• A. It uses more TCAM than a single-initiator single target zone.
• B. It increases the number of zones.
• C. It uses less TCM space than a single-initiator target zone.
• D. It blocks RSCNs between initiators.

Answer: A

NEW QUESTION 19
Refer to the exhibit.

What is the result when you run the command?

• A. All switches in the fabric receive the active zone set.
• B. The zone set is activated on the switch only.
• C. On the reboot, all switches in the fabric receives the active zone set.
• D. The default zone set is activated on all switches in the fabric.

Answer: B