Introducing The New!
Surepassexam Collection
Get Unlimited Access to all
Surepassexam's PREMIUM files
Q1. What three considerations should be taken into account when selecting a routing protocol? (Choose three.)
A. classful routing
B. scalability
C. default route origination
D. multi vendor support
E. link load balancing
F. hop count
Answer: B,D,E
Q2. What is the maximum RIPv2 hop count for a reachable route?
A. 13
B. 14
C. 15
D. 16
Answer: C
Q3. Which is the equation used to derive a 64 Kbps bit rate?
A. 2 x 8 kHz x 4-bit code words
B. 8 kHz x 8-bit code words
C. 2 x 4-bit code words x 8 kHz
D. 2 x 4 kHz x 8-bit code words
Answer: D
Q4. Which one of these statements describes why, from a design perspective, a managed VPN approach for enterprise teleworkers is most effective?
A. A managed VPN solution uses a cost-effective, on-demand VPN tunnel back to the enterprise.
B. This solution supports all teleworkers who do not require voice or video.
C. This architecture provides centralized management where the enterprise can apply security policies and push configurations.
D. It provides complete flexibility for remote access through a wireless hotspot or a guest network at a hotel, in addition to a home office.
Answer: C
Q5. What technology can secure data over an insecure medium and provide WAN redundancy in the event of a primary connection failure?
A. virtual private network
B. shadow PVC
C. dial-up ISDN
D. GRE Tunnel
Answer: A
Q6. A spanning tree topology can be simplified by deploying what Cisco IOS technology in the distribution block?
A. VDC
B. vPC
C. Rapid PVST+
D. VSS
E. Flex Links
Answer: D
Q7. Which protocol is the recommended first-hop redundancy protocol for an existing infrastructure that contains multiple vendors and platforms?
A. HSRP
B. VRRP
C. IGRP
D. OSPF
Answer: B
Q8. Which statement describes the recommended deployment of DNS and DHCP servers in the Cisco Network Architecture for the Enterprise?
A. Place the DHCP and DNS servers in the Enterprise Campus Access layer and Enterprise branch.
B. Place the DHCP and DNS servers in the Enterprise Campus Server Farm layer and Enterprise branch.
C. Place the DHCP server in the Enterprise Campus Core layer and Remote Access_VPN module with the DNS server in the Internet Connectivity module.
D. Place the DHCP server in the Enterprise Campus Distribution layer with the DNS server in the Internet Connectivity module.
Answer: B
Explanation: For the Enterprise Campus, DHCP and internal DNS servers should be located in the Server Farm and they should be redundant. External DNS servers can be placed redundantly at the service provider facility and at the Enterprise branch.
Q9. A data center is reaching its power and cooling capacity. What two virtualization
technologies can address the problem by directly reducing the number of physical devices? (Choose two.)
A. virtual switching systems
B. virtual device contexts
C. virtual servers
D. virtual routing and forwarding
E. virtual port channels
F. virtual LANs
Answer: B,C
Q10. A network engineer is following the Cisco enterprise architecture model. To which network layer would a branch office connect to using a private WAN?
A. Enterprise Campus
B. Enterprise Edge
C. SP Edge Premise
D. Remote Module
Answer: D
Q11. Which Cisco Wireless LAN Controller interface is used for out-of-band management?
A. service port
B. management port
C. controller port
D. virtual port
Answer: A
Q12. By default, how does EIGRP's metric differ from OSPF?
A. hops
B. cost
C. bandwidth
D. delay
Answer: D
Q13. Which statement should the designer keep in mind when considering the advanced routing features?
A. One-way route redistribution avoids the requirement for static or default routes.
B. Redistribution, summarization, and filtering are most often applied between the campus core and enterprise edge.
C. Filtering only occurs on the routing domain boundary using redistribution.
D. Summarize routes at the core toward the distribution layer.
E. The hierarchical flexibility of IPv6 addressing avoids the requirement for routing traffic reduction using aggregation.
Answer: B
Q14. Which option is a benefit of the modular approach to network design?
A. higher availability
B. repeatable scalability
C. increased security
D. improved resiliency
Answer: B
Q15. Which IPv6 feature enables routing to distribute connection requests to the nearest content server?
A. Link-local
B. Site-local
C. Anycast
D. Multicast
E. Global aggregatable
Answer: C
Explanation: Any cast is a network addressing and routing methodology in which data grams from a single sender are routed to the topologically nearest node in a group of potential receivers all identified by the same destination address. Link: http://en.wikipedia.org/wiki/Anycast
Q16. When designing the infrastructure protection portion for the enterprise edge, which solution would be the most appropriate solution to consider?
A. 802.1X
B. ACLs in the core layer
C. Cisco Security MARS
D. AAA
Answer: D