Introducing The New!
Surepassexam Collection
Get Unlimited Access to all
Surepassexam's PREMIUM files
Q1. RAG DROP
Answer:
Q2. In a network with a deployed Cisco WLC, which two entities must be configured with the shared secret key for 802.1X authentication? (Choose two.)
A. WLC
B. RADIUS server
C. AP
D. supplicant
E. wireless client
Answer: A,B
Q3. You have a lightweight AP that has been moved to a new subnet and has become stranded because DNS and DHCP servers are unavailable. The AP cannot connect to the controller.
When connected to the console port, which three minimum parameters must you configure? (Choose three.)
A. AP IP address
B. controller name
C. AP hostname
D. default gateway IP address
E. controller IP address
F. username and password
Answer: A,D,E
Q4. Refer to the exhibit.
Which GUI item do you click to configure authentication and authorization in Cisco WCS?
A. Security
B. Monitor
C. Configure
D. Services
E. Administration
F. Tools
Answer: E
Q5. Which two statements about the Cisco WLC and AP code upgrade when 7.0 is running are true? (Choose two.)
A. The AP can download and run new code only after a Cisco WLC reboot causes the AP discovery and join.
B. The AP can download new code before the Cisco WLC reboot, but only if the AP is configured the CLI via SSH.
C. The AP can download new code before Cisco WLC reboot if it is configuring the Cisco WLC directly using the GUI via HTTP or HTTPS.
D. The Cisco WLC defaults to booting newer code, but it can boot older backup code only from the CLI configuration.
E. The Cisco WLC can boot either primary or backup code configured from the GUI.
F. The Cisco WLC can download only a single code at a time for reboot.
Answer: C,E
Q6. The administrator needs to create a report that shows all controllers, APs, and Cisco 3300 Series MSEs in the WLAN, including hardware and software information. Which report includes this information?
A. Device > Inventory
B. Mesh > Nodes
C. Network Summary > Executive Summary
D. Network Summary > 802.11 Summary
Answer: A
Q7. Refer to the exhibit.
Which action allows you to view a summary count by alarm types for the displayed total of 11 alarms?
A. Choose Monitor > Alarms
B. Click the Security tab
C. Click a respective number in the Alarm Summary
D. Click the Alarm Summary blue arrow
E. Choose Home (house icon) > Alarm Summary
Answer: D
Q8. What 802.1x role is responsible for moving a port to the authorized state?
A. Supplicant
B. Authenticator
C. Authentication Server
D. RADIUS Server
Answer: B
Q9. A wireless bridge is being installed near an airport. An organization informs the city council about complying with max power levels that could be used and settings on any 5GHz channels used that might interfere with the airport radar. What organization is this?
A. Institute of Electrical and Electronics Engineers
B. Internet Engineering Task Force
C. Federal Communications Commission
D. Wireless Fidelity Alliance
Answer: C
Q10. Which type of basic radiation pattern does a Yagi antenna have?
A. circular
B. semicircular
C. straight line
D. cone
Answer: D
Q11. Which two items are needed to discover the IP address of a new Cisco Aironet 1260 autonomous AP that just finished booting? (Choose two.)
A. username = "cisco" and password = "cisco"
B. username = "Admin" and password = "Cisco"
C. username=Cisco and password=Cisco
D. show int vlan1
E. show int bvi1
F. show int gigabitethernet0
G. show int radio0-802.11n
H. show int radio1-802.11n
Answer: C,E
Q12. An engineer is using a predictive survey tool to estimate placement of APs in a carpeted office space. Most interior walls should be assigned which attenuation value?
A. 2 dB
B. 3 dB
C. 4 dB
D. 5 dB
Answer: B
Q13. Refer to the exhibit.
What does the yellow shield with the exclamation mark indicate?
A. The network uses open authentication and no encryption.
B. The network uses an unsupported channel.
C. The signal is too distorted to connect.
D. The AP that is transmitting this SSID uses the wrong RF domain.
E. This is the ad-hoc network.
Answer: A
Q14. What is a function of the service port on a WLC?
A. controls mobility manager communications on all physical ports
B. controls out-of-band management for system recovery and maintenance
C. controls communication with Cisco Aps
D. controls communications for all physical ports
Answer: B
Q15. Which information on the Monitoring page of a Cisco WLC verifies that the wireless network is operational?
A. In the Access Point Summary section, the All APs number in the Up column is the same as in the Total column.
B. In the Client Summary section, the Current Clients number is positive.
C. In the Controller Summary section, the 802.11b/g Network State is shown as Enabled.
D. In the Controller Summary section, the CPU Usage number is positive.
Answer: A