Introducing The New!
Surepassexam Collection
Get Unlimited Access to all
Surepassexam's PREMIUM files
Q1. An engineer recently removed a WLC from a WCS, but the APs associated to the WLC are still showing on the WCS. What is a reason for this?
A. The associated APs must be removed manually.
B. The APs must be removed from the WCS map.
C. The hold-down timer must expire before the APs will be removed.
D. The APs must be audited.
Answer: A
Q2. A customer mounted three new APs in a small business. After configuring the IP address, users still could not access the web through the new access points. What two configurations are needed to fix this? (Choose two.)
A. Security parameters
B. Gateway address
C. Service Set ID
D. Antenna option
E. EAP Authentication
F. Unique AP Name
Answer: B,C
Q3. What are the three primary functions of the Cisco Unified Wireless LWAPP architecture? (Choose three.)
A. control and management of the CAPWAP
B. tunneling of VPN clients over the WAN
C. tunneling of WLAN client traffic to the WLC
D. collection of 802.1Q trunks
E. collection of 802.11 data for management
F. control and management of VTP
Answer: A,C,E
Q4. An access point is currently transmitting at 4 mW. The customer needs to increase its signal strength by 6 dB to create a larger wireless cell. What should the new transmit power be?
A. 8 mW
B. 10 mW
C. 12 mW
D. 16 mW
E. 24 mW
Answer: D
Q5. A customer wants to deploy Cisco Cloud Wireless architecture with 802.11ac capabilities.
Which access points would meet the customers’ requirements? (Choose two.)
A. Cisco 3700 Access Points
B. Cisco MR34 Access Points
C. Cisco MR18 Access Points
D. Cisco 3600 Access Points
E. Cisco MR72 Access Points
F. Cisco 1570 Access Points
G. Cisco MR26 Access Points
Answer: B,E
Q6. You have brought your MacBook Pro running OS 10.6 to work and intend use the enterprise wireless network. This network is using EAP-FAST and 2.4 GHz for data and 5 GHz for VoWLAN.
Which statement about the laptop configuration and wireless connection is true?
A. Install a USB wireless adapter and configure
B. Install Apple EAP-Fast plug-in and configure
C. Install Cisco AnyConnect v2.4 and configure
D. Configure Apple network preferences for EAP-FAST
E. The laptop does not support EAP-FAST and will be unable to connect
F. The laptop only supports 5 GHz and will be unable to connect
Answer: D
Q7. Tablets and other wireless clients are unable to connect at any 802.11 n data rates. What is the most likely cause of this problem?
A. WLAN > General properties are incorrectly configured.
B. WLAN > QoS properties are incorrectly configured.
C. WLAN > Security properties are incorrectly configured.
D. WLAN > Advanced properties are incorrectly configured.
E. Wireless > AP > 802.11 a/n is incorrectly configured.
F. Wireless > 802.11a/n > Network is incorrectly configured.
Answer: C
Q8. You are on the phone working with a colleague that is console connected to a lightweight AP that has lost its configuration. Which three actions are necessary to allow the AP to connect to a controller? (Choose three.)
A. Configure the AP IP address.
B. Configure the controller name.
C. Configure the controller IP address.
D. Configure the AP hostname.
E. Configure the AP IP default-gateway.
F. Configure the AP username and password.
Answer: A,C,E
Q9. Which single tool helps to troubleshoot client-related issues in a WLAN?
A. The show and debug commands on the controller.
B. The show commands on the AP.
C. Client templates on the Cisco WCS.
D. Client troubleshooting on the Cisco WCS.
Answer: D
Q10. In the current RF environment, the noise floor is -95 dBm. A tablet needs an SNR of 25 dB to transmit at the required speed. What must the RSSI cell edge be to meet the required SNR?
A. -120 dBm
B. -90 dBm
C. -70 dBm
D. -60 dBm
E. -50 dBm
Answer: C
Q11. Which protocol is used for Cisco WCS to communicate with Cisco WLC?
A. SNMP
B. CAPWAP
C. HTTPS
D. SSH
Answer: A
Q12. When an AP, in its default configuration mode, connects to a Cisco WLC, which methods are available for remote management access to an AP?
A. SSL and SSH are available only after configuration by a Cisco WLC version 7.0.
B. SSH only
C. HTTPS, and SSH
D. SSH and Telnet
E. SSH and Telnet are available only after configuration by a Cisco WLC version 7.0.
Answer: D
Q13. An engineer wants to setup WPA2 Enterprise using EAP-TLS and a remote RADIUS server. What device(s) would the engineer specify the EAP type on?
A. the supplicant and authentication server
B. the supplicant and authenticator
C. the authenticator and authentication server
D. the supplicant only
E. the authentication server only
Answer: A
Q14. Which encryption algorithm does WPA use?
A. RC4
B. DES
C. AES
D. DH5
Answer: A
Q15. A client is deploying lightweight APs. Those with LAN connections to the controller would be considered what mode of deployment, while access points deployed across a higher latency connection are deployed in what mode?
A. HREAP; Bridge
B. Local; Bridge
C. HREAP; Flex Connect
D. Local; Flex Connect
Answer: D