Introducing The New!
Surepassexam Collection
Get Unlimited Access to all
Surepassexam's PREMIUM files
Q1. When a wireless guest network is implemented using auto-anchor mobility in a controller-based wireless network, which controller is responsible for a guest client's IP address and their security configuration?
A. any controller that supports the same VLAN
B. foreign controller
C. anchor controller
D. master controller
E. RF group master controller
Answer: C
Q2. Which three options are limitations when configuring basic security on an autonomous AP when using the express security page setup? (Choose three.)
A. You need multiple SSIDs.
B. Delete all the SSIDs.
C. Edit the SSIDs.
D. Use multiple authentication servers.
E. Use the same SSID on both radios.
F. Use a single SSID on a single radio.
Answer: C,D,E
Q3. An AP using version 7.0 MR1 broadcasts a Layer 3 CAPWAP discovery message on the local IP subnet. Which step does the AP take next?
A. Determine if the controller responses include the primary controller.
B. Determine if the controller responses include the master controller.
C. Send a discovery request using DHCP option 43.
D. Send a discovery request using DNS.
E. Send a discovery request using locally stored information on the AP.
F. Send a discovery request using OTAP.
Answer: E
Q4. An engineer is trying to identify if radar has impacted the wireless network at a customer site. When using the controller GUI, which dashboard in the Monitor section presents this information?
A. 802.11a/n - Air Quality Reports
B. Clean Air - Worst Air Quality Report
C. 802.11b/g/n - Interfering Devices
D. Statistics - Mobility Statistics
Answer: A
Q5. Refer to the exhibit.
Which two statements about the status of the respective AP on a Cisco WCS version 7.0 map does this icon represent? (Choose two.)
A. The 802.11a/n radio is administratively disabled.
B. The 802.11a/n radio has a minor fault.
C. The 802.11a/n radio has a major fault.
D. The 802.11b/g/n radio is administratively disabled.
E. The 802.11b/g/n radio has a minor fault.
F. The 802.11b/g/n radio has a major fault.
Answer: B,F
Q6. RAG DROP
Answer:
Q7. What path displays the current maps within the WCS version 7 GUI?
A. Monitor > Maps
B. Reports > Maps
C. Services > Maps
D. Administration > Maps
E. Configure > Maps
F. Tools > Maps
Answer: A
Q8. Which module does the Cisco AnyConnect Secure Mobility client integrate into the AnyConnect client package for access to both wired and wireless networks?
A. Network Access Manager
B. Telemetry
C. Web Security
D. DART
Answer: A
Q9. To mitigate DoS attacks on a network, what security method should be implemented?
A. WEP
B. 802.1x
C. Non-broadcast SSID
D. Client MFP
Answer: D
Q10. You need to set up an ad hoc connection to another client in a conference room to exchange files using Windows 7. Which two items do you need to create this connection? (Choose two.)
A. SSID name
B. RF channel
C. 802.1X/EAP credentials
D. pre-shared key
E. Telnet
F. IBSS name
G. SSH
Answer: D,F
Q11. The wireless network is using controller-based APs and version 7.0 MR1. The APs appear to be connected properly to the controllers. A wireless user near one of the APs reports that they are unable to connect to the network with their pre-shared key.
Which option shows the GUI path where you can check the connection status of that client?
A. WLANs > WLAN_ID > Advanced
B. Security > Clients
C. Security > Advanced > Clients
D. Monitor > Clients
E. Wireless > 802.11b/g/n > clients
Answer: D
Q12. You are configuring SNMPv1/v2c on a WLC. What should you do for improved security?
A. Remove the default SNMPv1 community.
B. Remove the default SNMPv1 and SNMPv2 communities.
C. Remove the default SNMPv2 community.
D. Remove the default SNMPv3 users.
Answer: B
Q13. What is the maximum number of access points supported on Cisco WCS with an enterprise license?
A. 5,000
B. 10,000
C. 50,000
D. 100,000
Answer: C
Q14. RAG DROP
Answer:
Q15. Which two statements about the results of the Cisco WCS version 7.0 client troubleshooting tool are true? (Choose two.)
A. Results of Layers 1 - 3 are provided.
B. Results of only Layers 2 and 3 are provided.
C. Results of Layers 4 - 7 are provided.
D. The tabulated results vary depending on the client type.
E. Results are provided in a fixed four-part tabulation.
F. Results are provided in a fixed six-part tabulation.
Answer: A,D