Introducing The New!
Surepassexam Collection
Get Unlimited Access to all
Surepassexam's PREMIUM files
Q1. When a client associates to ExamSSlD, which network address will be assigned?
A. The IP address assigned will be based on the AP network assignment of 10.10.10.0.
B. The IP address assigned will be based on the AP network assignment of 172.16.23.0.
C. The IP address will be assigned in a round-robin format based on the 172.16.12.0, 172.16.23.0,192.168.14.0 address pools.
D. The IP address will be assigned in a round-robin format based on the 172.16.12.0, 192.168.14.0,192.168.25.0 pools.
E. The IP address will be assigned in a round-robin format based on the 172.16.12.0, 172.16.23.0,192.168.14.0,192.168.25.0 pools.
Answer: D
Q2. The results of a Cisco WCS client troubleshooting tool are summarized into a simple visual representation of a four-part progression of the connection status for a wireless client.
What are the four parts? (Choose four.)
A. client MAC address
B. 802.11 authentication
C. IP address assignment
D. 802.11 association
E. successful association
F. authentication method
G. SSID
H. client radio type
Answer: B,C,D,E
Q3. Which Cisco AnyConnect module provides wireless connectivity?
A. telemetry
B. web security
C. VPN
D. NAM
E. DART
F. posture
G. CSSC
Answer: D
Q4. Which three items are allowed on an Ethernet trunk port? (Choose three.)
A. autonomous AP
B. FlexConnect AP
C. local AP
D. monitor AP
E. rogue detector AP
F. sniffer AP
G. SE-Connect AP
H. Cisco WLC
Answer: A,B,E
Q5. Which option describes why most wireless phones and tablets do not use 802.11a/n and 40 MHz channels?
A. a lack of radio range when using these radios
B. a lack of device battery capacity to operate concurrent a/b/g/n radios
C. a lack of cooling in the device necessary to operate these radios
D. These radios would require the devices to be larger.
Answer: B
Q6. An engineer is using WCS' client troubleshooting tool to investigate issues with a client
device. What is the longest log capture they will be able to take?
A. 2 minutes
B. 5 minutes
C. 10 minutes
D. 30 minutes
Answer: C
Q7. When using a Cisco WLC version 7.0 with a default configuration, how is a remote management HTTPS access connection secured?
A. The Cisco WLC uses a pre-shared key to authenticate the user, which limits the number of potential users that can access the controller.
B. The Cisco WLC generates its own local web administration SSL certificate and automatically applies it to the GUI.
C. The Cisco WLC uses a CA certificate for SSL access.
D. The Cisco WLC uses HTTPS to secure the HTTP session via a preconfigured password that generates a certificate for each session.
Answer: B
Q8. Cisco Client Management Frame Protection is running on a mobility group with two controllers.
Which two MFP requirements protect the network? (Choose two.)
A. forces clients to authenticate, using a secure EAP method only
B. implements the validation of wireless management frames
C. requires Cisco Compatible Extensions v5
D. requires the use of a nonbroadcast SSID
E. requires Cisco Compatible Extensions v4
Answer: B,C
Q9. Refer to the exhibit. A customer is using central web authentication with a Cisco 5508 Wireless Controller and Cisco Identity Services Engine. An error occurs when wireless clients are redirected to the hosted splash page. What is causing the client error?
A. Secure Web Mode is disabled on the WLC.
B. OCSP is disabled on the WLC.
C. Management Via Dynamic Interface is disabled on the WLC.
D. Ethernet Multicast Forwarding is enabled on the WLC.
Answer: A
Q10. Refer to the exhibit.
At which point in the network topology must the trunk be configured to support multiple SSIDs for voice and data separation?
A. A
B. B
C. C
D. D
Answer: D
Q11. Which Cisco program for WLAN client vendors helps to ensure that their devices are interoperable with Cisco WLAN infrastructure?
A. CCX
B. CCMP
C. ASDM
D. WLSE
Answer: A
Q12. What is an MBSSID?
A. a virtual AP configured on a physical AP that share a single physical device, which is one half-duplex radio
B. a set of physical APs configured in a BSA to form cells that are controlled by a single controller
C. the group of clients that are allowed to gain access to one or more SSIDs configured in an AP
D. the identified overlap area between two cells, which identifies the clients that are operating in that area at any given time
Answer: A
Q13. A customer has asked for the proper port configuration to allow for LAG on a Cisco 2504 Wireless Controller to a Cisco IOS switch. Which EtherChannel mode should be used on the switch to allow for the WLC to connect?
A. on
B. auto
C. desirable
D. passive
E. active
Answer: A
Q14. An engineer needs to find out the maximum EIRP allowed for their office in Asia. What regulatory body should be contacted?
A. CRTC
B. ETSI
C. IEEE
D. NTT
Answer: D
Q15. What are the interface statuses of a lightweight AP working in rogue-detection mode?
A. radios turned off, Ethernet interface up
B. radios and Ethernet interfaces up
C. radios turned on, Ethernet interface shut down
D. radios turned on, Ethernet interface status controlled by Cisco WLC
Answer: A