Q1. You are sitting in an airport preparing to use a free WLAN. When you look at the connections in your Windows 7 wireless client, you see a network name and three boxes with a yellow shield.
What does this mean?
A. You cannot connect to this WLAN.
B. An open ad hoc network is nearby.
C. The WLAN in the airport is open.
D. A secure ad hoc network is nearby.
E. A secure WLAN is in the airport.
F. You must provide a username and password to access the WLAN in the airport.
Answer: B
Q2. If an antenna has a dBd of 8.6, what is the dBi value?
A. 6.2
B. 6.46
C. 8.6
D. 10.74
E. 12.88
Answer: D
Q3. What APTx Power Level Assignment would be required to increase power by 3 dBm on 2.4GHz radio?
A. 1
B. 2
C. 3
D. 4
E. 5
F. 6
G. 7
H. 8
Answer: D
Q4. A customer has a corporate SSID that is configured to authenticate against an ACS server to validate client credentials on the corporate SSID. The customer has a firewall logically positioned on the network between the WLC and the ACS server in the network architecture. Which port must the firewall allow to ensure that authentication can occur?
A. 43
B. 1812
C. 5146
D. 8143
Answer: B
Q5. A customer has ordered a Cisco 5760 Wireless Controller. What speed and quantity of ports are needed for full-speed operation?
A. 6 x 1 Gb
B. 6 x 10 Gb
C. 2 x 10 Gb
D. 2 x 1 Gb
E. 8 x 1 Gb
F. 8 x 10 Gb
Answer: B
Q6. In a network with a deployed Cisco WLC, which two entities must be configured with the shared secret key for 802.1X authentication? (Choose two.)
A. WLC
B. RADIUS server
C. AP
D. supplicant
E. wireless client
Answer: A,B
Q7. Configurations are commonly uploaded and downloaded to a WLC.
Which options are other examples of a file that can be uploaded from a Cisco 2500 Series WLC?
A. packet capture
B. crash file
C. code
D. login banner
E. PAC
Answer: B
Q8. RAG DROP
Answer:
Q9. Which two actions would you use to begin to troubleshoot an access point that fails to join a wireless LAN controller successfully? (Choose two.)
A. SSH to the AP.
B. SSH to the Cisco WCS.
C. SSH to the Cisco WLC.
D. Issue the Cisco WLC command debug capwap events enable
E. Issue the Cisco WLC command show capwap events
Answer: C,D
Q10. The network administrator wants an access point to be able to find rogue APs and to support location-based services. Which AP mode meets this requirement while having the radios up and preventing client connections?
A. monitor
B. sniffer
C. rogue-detection
D. H-REAP
Answer: A
Q11. Which of the following are three functions of Cisco RRM? (Choose three.)
A. TPC
B. intercontroller roaming
C. dynamic channel assignment
D. intracontroller roaming
E. coverage hole detection
Answer: A,C,E
Q12. The results of a Cisco WCS client troubleshooting tool are summarized into a simple visual representation of a four-part progression of the connection status for a wireless client.
What are the four parts? (Choose four.)
A. client MAC address
B. 802.11 authentication
C. IP address assignment
D. 802.11 association
E. successful association
F. authentication method
G. SSID
H. client radio type
Answer: B,C,D,E
Q13. Which two formats are available for Cisco WCS reports? (Choose two.)
A. PDF
B. CSV
C. HTML
D. TXT
Answer: A,B
Q14. The wireless network is using controller-based APs and version 7.0 MR1. The APs appear to be connected properly to the controllers. A wireless user near one of the APs reports that they are unable to connect to the network with their pre-shared key.
Which option shows the GUI path where you can check the connection status of that client?
A. WLANs > WLAN_ID > Advanced
B. Security > Clients
C. Security > Advanced > Clients
D. Monitor > Clients
E. Wireless > 802.11b/g/n > clients
Answer: D
Q15. RAG DROP
Answer: