Introducing The New!
Surepassexam Collection
Get Unlimited Access to all
Surepassexam's PREMIUM files
Q1. Which two Cisco WLC management-access methods are available as the default setting? (Choose two.)
A. SSH
B. HTTPS
C. Telnet
D. HTTP
Answer: A,B
Q2. Refer to the exhibit. An engineer is configuring a SSID to utilize the management interface on the WLC. The management interface is configured with an untagged VLAN in the wireless controller interface settings. The controller is connected to a neighboring switch via the interface shown in the diagram.
Which VLAN will traffic coming from the newly created SSID use to traverse the wired network?
A. 1
B. 20
C. 44
D. 50
Answer: C
Q3. What are three characteristics of WCS? (Choose three.)
A. based on a single server licensing system
B. used for wireless planning
C. used for real-time tracking of multiple clients
D. used for wireless management
E. used for RF fingerprinting
F. based on a per server licensing system
Answer: A,B,D
Q4. Which statement about configuration of Layer 2 wireless user authentication on a Cisco WLC is true?
A. Local EAP is used only if an external RADIUS is not configured or is unreachable.
B. The external RADIUS is used only if local EAP is not configured.
C. The administrator chooses whether local EAP or an external RADIUS is used first.
D. The external RADIUS is used only if local EAP is explicitly disabled.
Answer: A
Q5. You have a lightweight AP that has been moved to a new subnet and has become stranded because DNS and DHCP servers are unavailable. The AP cannot connect to the controller.
When connected to the console port, which three minimum parameters must you configure? (Choose three.)
A. AP IP address
B. controller name
C. AP hostname
D. default gateway IP address
E. controller IP address
F. username and password
Answer: A,D,E
Q6. Refer to the exhibit.
With the current Cisco WLC version 7.0 syslog level settings set the way they are, which log levels are captured by the Syslog server?
A. syslog level errors only
B. all syslog levels
C. only the syslog severity level number of error and greater
D. only the syslog severity level number of error and less
Answer: D
Q7. Refer to the exhibit.
How do improperly set Telnet/SSH parameters effect the configuration of a controller with Cisco WCS?
A. The CLI and GUI management of the controller both fail because Cisco WCS checks these credentials before opening a session.
B. The Telnet/SSH username must have sufficient privileges to execute commands in CLI templates.
C. The GUI management of the controller fails because the Cisco WCS uses the Telnet/SSH parameters to login to the controller.
D. The controller remains configured in the Cisco WCS, but no management is possible through GUI from other client browsers.
Answer: B
Q8. When the pre-shared key authentication method is used for WPA or WPA2, for which two functions is the pre-shared key used? (Choose two.)
A. to act as the Group Transient Key during the bidirectional handshake
B. to act as the Pairwise Master Key during the bidirectional handshake
C. to derive the nonce at each side of the exchange
D. to derive the Pairwise Transient Key
Answer: B,D
Q9. What two AP configurations will show RF prediction on maps in WCS? (Choose two.)
A. Lightweight APs with internal antennas
B. Lightweight APs with external Cisco antennas
C. Lightweight APs with external 3rd Party antennas
D. Autonomous APs with internal antennas
E. Autonomous APs with external Cisco antennas
F. Autonomous APs with external 3rd Party antennas
Answer: A,B
Q10. In setting up the wireless network, it is desired that the DHCP server that is configured in WLC1 provides IP addressing to the WLAN. When devices attempt to join the network, they fail to receive an IP address in the range provided by the DHCP server in WLC1, but they do receive an IP address from the DHCP server in SW1. What is causing this issue?
A. The external DHCP server in SW1 will always be the preferred DHCP server and WLC1 will always be the secondary DHCP server in the WLAN.
B. The DHCP server address for SW1 needs to be removed from the DHCP server configuration in WLC1.
C. The primary DHCP server address in WLC1 is incorrect.
D. The primary DHCP server configured in WLC1 is not enabled.
Answer: D
Q11. Refer to the exhibit.
What is the meaning of the inverted orange triangle (marked "0") in the Alarm Summary tab of Cisco WCS?
A. number of major alarms
B. number of minor alarms
C. number of critical alarms
D. number of system alarms
Answer: A
Q12. Which two statements about the results of the Cisco WCS version 7.0 client troubleshooting tool are true? (Choose two.)
A. Results of Layers 1 - 3 are provided.
B. Results of only Layers 2 and 3 are provided.
C. Results of Layers 4 - 7 are provided.
D. The tabulated results vary depending on the client type.
E. Results are provided in a fixed four-part tabulation.
F. Results are provided in a fixed six-part tabulation.
Answer: A,D
Q13. Which four options are the characteristics of the original 802.11 protocol? (Choose four.)
A. Defined DSSS and FHSS as possible methods for modulation
B. Designed to operate in the 5 GHz ISM frequency spectrum
C. The most common deployment is three non-overlapping channels that are 20 MHz wide
D. The protocol sets the maximum throughput at 1 Mb/s or 2 Mb/s
E. Defined FHSS and OFDM as possible methods for modulation
F. The most common deployment is three non-overlapping channels that are 22 MHz wide
G. Designed to operate in the 2.4 GHz ISM frequency spectrum
H. The protocol sets the maximum throughput at 1 Mb/s
Answer: A,D,F,G
Q14. What tool can be used to increase accuracy of WCS heat maps?
A. Map Editor
B. Planning Tool
C. CleanAir
D. Cisco Spectrum Expert
Answer: A
Q15. What is the EIRP value for a transmitter that has a transmitter capable of 15 dBm, an antenna that has a gain of 12 dBi, and a cable that connects the transmitter to the antenna that has 1 db loss?
A. 26 dBm
B. 100 mW
C. .86 dBm
D. 165 dBm
E. 1000 mW
Answer: A