F5-Networks 201 Free Practice Questions

NEW QUESTION 1
Which statement is true concerning the default communication between a redundant pair of BIG-IP devices?

• A. Communication between the systems cannot be effected by port lockdown settings.
• B. Data for both connection and persistence mirroring are shared through the same TCP connection.
• C. Regardless of the configuration, some data is communicated between the systems at regular intervals.
• D. Connection mirroring data is shared through the serial fail over cable unless network failover is enabled.

Answer: B

NEW QUESTION 2
The BIG-IP Administrator needs to ensure the correct health monitor is being used lor a new HTTP pool named P_example.
Where should the BIG-IP Administrator validate these settings in the Configuration Utility?

• A. Local Traffic > Nodes > Default Monitor
• B. Local Traffic > Profiles > Services > HTTP > http
• C. Local Traffic > Monitors > http
• D. Local Traffic > Pools > P_ example

Answer: D

NEW QUESTION 3
A BIG-IP has two load balancing virtual servers at 150.150.10.10:80 and 150.150.10.10:443. The port 80 virtual server has SNAT automap configured. There is also a SNAT configured at 150.150.10.11 set for a source address range of 200.200.1.0 / 255.255.255.0. All other settings are at their default states. If a client with the IP address 200.200.1.1 sends a request to https://150.150.10.10, what is the source IP address when the associated packet is sent to the pool member?

• A. 200.200.1.1
• B. 150.150.10.11
• C. Floating self IP address on VLAN where the packet leaves the system
• D. Floating self IP address on VLAN where the packet arrives on the system

Answer: B

NEW QUESTION 4
A BIG-IP Administrator needs to check the memory utilization on a BIG-IP system. Which two methods can the UIG IP Administrator use? (Choose two.)

• A. Run the tmsh show/sys memory command
• B. Run the tmsh show/sys traffic command
• C. Go to Statistics > Module Statistics > Traffic Summary in the configuration utility
• D. Go to Statistics > Module Statistics > Memory in the configuration utility
• E. Go to System > Disk Management in the configuration utility

Answer: AD

NEW QUESTION 5
A BIG-IP Administrator must determine if a Virtual Address is configured to fail over to the standby member of a device group in which area of the Configuration Utility can this be confirmed?

• A. Device Management > Traffic Groups
• B. Device Management > Devices
• C. Local Traffic > Virtual Servers
• D. Device Management > Overview

Answer: C

NEW QUESTION 6
A BIG-IP Administrator needs to restore an encrypted UCS archive from the command line using the TMSH utility.
Which TMSH command should the BIG-IP Administrator use to accomplish this?

• A. load/sys ucs passphrase
• B. load/sys config file passphrase
• C. load/sys config file
• D. load/sys ucs no-license

Answer: A

NEW QUESTION 7
Which method is recommended for creating a new user from the CLI?

• A. Run f5adduser username' then 'f5passwd username' from bash or tmsh
• B. Run tmsh create auth user username prompt for password' from bash
• C. edit bigip.conf to add the new user and the user's clear-text password
• D. Run useradd username' then 'passwd username' from bash tmsh

Answer: B

NEW QUESTION 8
Refer to the exhibit.

How are new connections load balanced?

• A. To the first two members listed with the same priority group
• B. To the pool member with the least number of connections
• C. To the pool member with a high priority group value defined
• D. To the pool member with a low priority group value defined

Answer: B

NEW QUESTION 9
A BIG-IP Administrator defines a device Self IP . The Self IP is NOT reachable from the network. What should the BIG-IP Administrator verify first?

• A. The correct interface has been selected.
• B. The correct VLAN has been selected.
• C. Verify if auto last hop is disabled.
• D. The correct Trunk has been selected.

Answer: B

NEW QUESTION 10
What should the BIG-IP Administrator do to apply and activate a hotfix to a BIG-IP device that is currently running version 11.0.0 on active partition HD1.1?

• A. * 1. confirm that 11.0.0 is installed on inactive partition HD1.2* 2. apply a hotfix to partition HD 1.2* 3. activate partition HD1.2
• B. * 1. reactivate the license on partition HD1.1* 2. apply a hotfix to partition HD1.1
• C. * 1. activate partition HD1.2* 2 confirm version 11.0.0 on partition HD1.2* 3. install a hotfix on partition HD1.2
• D. * 1. set partition HD1.2 active* 2. apply a hotfix to partition HD1.2

Answer: A

NEW QUESTION 11
The BIG-IP appliance fails to boot. The BIG-IP Administrator needs to run the End User Diagnostics (EUD) utility to collect data to send to F5 Support.
Where can the BIG-IP Administrator access this utility?

• A. Console Port
• B. Internal VLAN interface
• C. External VLAN interface
• D. Management Port

Answer: A

NEW QUESTION 12
A user wants to use the iHealth Upgrade Advisor to determine any issues with upgrading TMOS from 13.0 to 13.1.
Where can the user generate the QKView to upload to iHealth?

• A. System > Software Management
• B. System > Archives
• C. System > Configuration
• D. System > Support

Answer: D

NEW QUESTION 13
A BIG-IP Administrator creates a new VLAN on BIG-IP Cluster Member A and attaches an Interface to it. Although the Auto Config Sync is in place, the new VLAN does NOT show up on Cluster Member B. What should the BIG-IP Administrator do to ensure the new VLAN is configured on each Cluster Member?

• A. Configure the new VLAN manually on Cluster Member B.
• B. Reset the Device Trust of the BIG-IP Cluster on either Cluster Member.
• C. Configure a Default Route for the new VLAN on Cluster Member A.
• D. Enable the Interface that is attached to the new VLAN on Cluster Member A.

Answer: A

NEW QUESTION 14
Which two can be a part of a virtual server's definition? (Choose two.)

• A. rule(s)
• B. pool(s)
• C. monitor(s)
• D. node address(es)
• E. loadbalancing method(s)

Answer: AB

NEW QUESTION 15
Refer to the exhibit.
Which two pool members should be chosen for a new connection? (Choose two.)

• A. 172.16.15.9.80
• B. 172.16.15.4.80
• C. 172.10.15.2.80
• D. 172.16.15.1.80
• E. 172.16.15.7.80

Answer: BE

NEW QUESTION 16
A VLAN has the following objects configured:
Self-IP 10.10.10.100 with port lockdown set to Allow default Virtual server 10.10.10.100:443 with UDP profile enabled Virtual server 10.10.10.0/24 port forwarding virtual server
Global destination NAT forwarding 10.10.10.100 to internal server 172.168.10.100
Which object will process this request when https://10.10.10.100 is entered into a browser?

• A. self-IP 10.10.10.100 with port lockdown set to Allow default
• B. virtual server 10.10.100/24 port o forwarding virtual server
• C. global destination NAT forwarding 10.10.10.100 to internal server 172.168.10.100
• D. virtual server 10.10.10.100.443 with UDP profile enabled

Answer: A

NEW QUESTION 17
A BIG-IP Administrator plans to upgrade a BIG-IP device to the latest TMOS version.
Which two tools could the administrator leverage to verify known issues for the target versions? (Choose two.)

• A. F5 University
• B. F5 Downloads
• C. F5 End User Diagnostics (EUD)
• D. FSiHealth
• E. F5 Bug Tracker

Answer: DE

Explanation:
F5 University -- F5 learning materials F5 Downloads - iso download page
F5 End User Diagnostics (EUD) -- Hardware detection

NEW QUESTION 18
......