F5-Networks 201 Free Practice Questions

NEW QUESTION 1
A site is load balancing to a pool of web servers. Which statement is true concerning BIG IP's ability to verify whether the web servers are functioning properly or not?

• A. Web server monitors can test the content of any page on the server.
• B. Web server monitors always verify the contents of the index.html page.
• C. Web server monitors can test whether the server's address is reachable, but cannot test a page's content.
• D. Web server monitors can test the content of static web pages, but cannot test pages that would require the web server to dynamically build content.

Answer: A

NEW QUESTION 2
Refer to the exhibit

A connection is being established to IP 1.1.1.1 on port 8080. Which virtual server will handle the connection?

• A. fwd_8080_vs
• B. host_vs
• C. host_ 8080_VS
• D. fwdvs

Answer: B

NEW QUESTION 3
A set of servers is used for an FTP application as well as an HTTP website via separate BIG-IP Pools. The server support team reports that some servers are receiving a lot more traffic than others.
Which Load Balancing Method should the BIG-IP Administrator apply to even out the connection count?

• A. Ratio (Member)
• B. Least Connections (Member)
• C. Least Connections (Node)
• D. Ratio (Node)

Answer: C

Explanation:
The connection is required to be balanced, and the unit is the server and the application port is the unit, so it is node.

NEW QUESTION 4
A BIG-IP Administrator remotely connects to the appliance via out-of-band management using https://mybigip mycompany net. The management portal has been working all week. When the administrator attempts to login today, the connection times out. Which two aspects should the administrator verify? (Choose two)

• A. DNS is property resolving the FQDN of the device.
• B. The device is NOT redirecting them to http.
• C. The administrator has the latest version of the web browser.
• D. Packet Filters on the device are blocking port 80.
• E. The administrator has TCP connectivity to the device.

Answer: AE

NEW QUESTION 5
The BIG-IP Administrator disable all pool members in a pool Users are still able to reach the pool members.
What is allowing users to continue to reach the disabled poo! members?

• A. A slow to time on Pool
• B. A persistence profile on the Virtual Server
• C. A slow ramp time on virtual Server
• D. A persistence profile on the Pool

Answer: B

NEW QUESTION 6
Refer to the exhibit.

How long will the persistence record remain in the table?

• A. 180 seconds after the last packet
• B. 180 seconds after the initial table entry
• C. 300 seconds after the initial table entry
• D. 300 seconds after the last packet

Answer: D

NEW QUESTION 7
Refer to the exhibit.
A BIG-IP Administrator configures the Virtual Server to pass HTTP traffic. Users report that they are unable to access the application
What should the administrator do to resolve this issue?

• A. Change the Virtual Server name
• B. Disable .he State
• C. Reconfigure the Source Address
• D. Reconfigure the Pool Members

Answer: D

NEW QUESTION 8
A BIGJP Administrator needs to load a UCS file but must exclude the license file. How should the administrator perform this task?

• A. From the CLI with command U tmsh load /$ys ucs no-license
• B. From the GUI, select the UCS file, unchcck the license box, and click restore
• C. From the CLI with command(tmos)« tmsh load /sys ucs no-license
• D. From the GUI, select the UCS file and click restore

Answer: A

NEW QUESTION 9
Refer to the exhibit.
During a planned upgrade lo a BIG-IP HA pair running Active/Standby, an outage to application traffic is reported shortly after the Active unit is forced to Standby Reverting the flower resolves the outage. What should the BIG-IP Administrator modify to avoid an outage during the next for over event?

• A. The Tag voice on the Standby device
• B. The interface on the Active device to 1.1
• C. The Tag value on the Active device
• D. The Interface on the Standby device to 1.1

Answer: A

NEW QUESTION 10
During a maintenance window, an EUD test was executed and the output displayed on the screen. The BIG-IP Administrator did NOT save the screen output. The BIG-IP device is currently handling business critical traffic. The BIG-IP Administrator needs to minimize impact. What should the BIG-IP Administrator do to provide the EUD results to F5 Support?

• A. Boot the device into EUD then collect output from console
• B. Execute EUD from tmsh and collect output from console
• C. Collect file /var/log/messages
• D. Collect file /shared/log/eud.log

Answer: D

NEW QUESTION 11
A BIG-IP has a virtual server at 150.150.10.10:80 with SNAT automap configured. This BIG-IP also has a SNAT at 150.150.10.11 set for a source address range of 200.200.1.0 / 255.255.255.0. All other settings are at their default states. If a client with the IP address 200.200.1.1 sends a request to the virtual server, what is the source IP address when the associated packet is sent to the pool member?

• A. 200.200.1.1
• B. 150.150.10.11
• C. Floating self IP address on VLAN where the packet leaves the system
• D. Floating self IP address on VLAN where the packet arrives on the system

Answer: C

NEW QUESTION 12
A BIG-IP device has only LTM and ASM modules provisioned. Both have nominal provisioning level. The BI6-IP Administrator wants to dedicate more resources to the LTM module. The ASM module must remain enabled. Which tmsh command should the BIG-IP Administrator execute to obtain the desired result?

• A. modify/sys provision asm level minimum
• B. modify /sys provision Itm level dedicated
• C. modify /sys provision asm level none
• D. modify /sys provision Itm level minimum

Answer: A

NEW QUESTION 13
Refer to the exhibit.

A BIG-IP Administrator configures a Virtual Server to handle HTTPS traffic. Users report that the application is NOT working.
Which actional configuration is regard to resolve this issue?

• A. Configure SSL Profile (Client)
• B. Configure Protocol Profile (Server)
• C. Configure Service Profile HTTP
• D. Configure SSL Profile (Server)

Answer: A

NEW QUESTION 14
Which log file should the BIG-IP Administrator check to determine if a specific user tried to log in to the 8IG-IP Configuration by utility?

• A. /var/log/pam/tally/log
• B. /ver/log/secure
• C. /var/log/trn
• D. /var/log/http.d

Answer: B

NEW QUESTION 15
When using the setup utility to configure a redundant pair, you are asked to provide a "Failover Peer IP". Which address is this?

• A. an address of the other system in its management network
• B. an address of the other system in a redundant pair configuration
• C. an address on the current system used to listen for failover messages from the partner BIG-IP
• D. an address on the current system used to initiate mirroring and network failover heartbeat messages

Answer: B

NEW QUESTION 16
Assume a virtual server has a ServerSSL profile. What SSL certificates are required on the pool members?

• A. No SSL certificates are required on the pool members.
• B. The pool members.SSL certificates must only exist.
• C. The pool members.SSL certificates must be issued from a certificate authority.
• D. The pool members.SSL certificates must be created within the company hosting the BIGIPs.

Answer: B

NEW QUESTION 17
Assume a BIG-IP has no NATs or SNATs configured. Which two scenarios are possible when client traffic arrives on a BIG-IP that is NOT destined to a self-IP? (Choose two.)

• A. If the destination of the traffic does not match a virtual server, the traffic will be discarded.
• B. If the destination of the traffic does not match a virtual server, the traffic will be forwarded based on routing tables.
• C. If the destination of the traffic matches a virtual server, the traffic will be processed per the virtual server definition.
• D. If the destination of the traffic matches a virtual server, the traffic will be forwarded, but it cannot be loadbalanced since no SNAT has been configured.

Answer: AC

NEW QUESTION 18
......