CompTIA 220-1101 Free Practice Questions

NEW QUESTION 1
Which of the following components enables the input on a mobile device's touch screen?

• A. OLED
• B. Digitizer
• C. Inverter
• D. CMOS sensor

Answer: B

NEW QUESTION 2
A remote user reports connectivity issues with the local internet provider. Even after a technician reboots the modem supplied by the ISP. the issue persists. Which of the following would BEST establish the connection in minimal time?

• A. Radio frequency ISP
• B. Neighbor's Wi-Fi
• C. Mobile hotspot
• D. Fiber optic

Answer: C

NEW QUESTION 3
A technician goes to a classroom to troubleshoot a projector that occasionally powers off. The technician recreates the issue and notices the projector will not power back on until approximately 15 minutes have passed. After 15 minutes of being powered on. the projector shuts off again. Which of the following should the technician perform NEXT to resolve the issue?

• A. Clean the filter.
• B. Adjust the standby timeout.
• C. Check the power cable connection.
• D. Replace the bulb.

Answer: A

NEW QUESTION 4
A user acquired a new workstation and is attempting to open multiple targe Excel files simultaneously. The user is not experiencing the expected performance when executing such large requests. Which of the following should a technician do FIRST?

• A. Increase the swap partition.
• B. Upgrade the CPU in the workstation.
• C. Upgrade the power supply in the workstation.
• D. Upgrade the RAM in the workstation.

Answer: D

NEW QUESTION 5
A customer reports that access to the network fileshare has become much slower than usual, but local applications do not seem to have trouble. The technician checks the download bandwidth and finds no issues. Which of the following should the technician check NEXT?

• A. Level of network utilization
• B. Customer use of two-factor authentication
• C. Amount of local drive space
• D. RAID array drive health

Answer: A

NEW QUESTION 6
Which of the following standards supports MIMO technology?

• A. 802.11a
• B. 802.11b
• C. 802.11g
• D. 802.11n

Answer: D

NEW QUESTION 7
Which of the following should the data center hardware technician implement to ensure maximum uptime for customers' virtual machines?

• A. Line conditioner
• B. AC voltage regulator
• C. Uninterruptible power supply
• D. Cloud storage backup

Answer: C

NEW QUESTION 8
A Microsoft Windows user is preparing to work in another country and needs to comply with corporate policy for data protection when copying files to portable medi a. Which of the following solutions would MOST likely satisfy this requirement?

• A. A USB 3.1 flash drive with BitLocker to Go installed
• B. An SD memory card with NTFS
• C. An xD memory card with ext3
• D. A portable hard drive with FAT32

Answer: A

NEW QUESTION 9
An organization is looking to upgrade the processing ability for its computers. Most users report that whenever multiple applications are being utilized, the system's response time slows down drastically. When only one application is open, the response time is acceptable. Which of the following should be upgraded FIRST?

• A. SSD
• B. CPU
• C. HDD
• D. RAM

Answer: C

NEW QUESTION 10
A technician needs to add storage to a workstation. The workstation does not have room to add any internal storage, so the technician plans to add an external storage device. Which of the following connection types should the technician MOST likely use?

• A. SCSI
• B. eSATA
• C. PCIe
• D. NVMe

Answer: B

NEW QUESTION 11
An administrator is configuring a corporate-owned smartphone for a new manager. The company requires the ability to wipe the phone's data remotely in the event of loss or theft and the capability to approve applications installed on the phone. Which of the following tools would BEST meet this need?

• A. Tethering to a corporate-owned laptop
• B. WPA2-Enterpise wireless
• C. Corporate enterprise email
• D. Mobile device management

Answer: D

NEW QUESTION 12
Which of the following describes metered utilization of cloud resources?

• A. Resources provisioned instantly
• B. Payments made only for resources that are used
• C. Resources pooled to increase computing power
• D. Implementation of rapid elasticity

Answer: B

NEW QUESTION 13
A user submitted a ticket to report an issue with a new printer that is no longer accepting new print jobs. The technician verifies the printer is on and notices the printer LCD screen has the following error message:
Paper Jam, Jam in fuser.
Which of the following is the MOST efficient next step the technician should complete?

• A. Apply a maintenance kit to the printer
• B. Check the printer paper path to locate any obstructions.
• C. Turn the printer on and off to see if the error clears.
• D. Replace the fuser.

Answer: B

NEW QUESTION 14
A user reports that a PC occasionally falls to boot. The user reboots the PC. but the performance is degrading. The technician hears a strange, repetitive, ticking noise coming from the PC. Which of the following should the technician do FIRST?

• A. Try to extract data.
• B. Reseat the RAM modules.
• C. Inspect the fan.
• D. Check the CD tray.

Answer: C

NEW QUESTION 15
A technician powers on a PC and its monitor and sees the following error message:
No input signal detected
The display lights on the computer are on. Which of the following is a possible solution?

• A. Changing the BIOS settings
• B. Changing the connector setting on the monitor
• C. Checking the power plug on the monitor
• D. Checking the power plug on the PC

Answer: B

NEW QUESTION 16
......