VMware 2V0-41.20 Free Practice Questions

NEW QUESTION 1
Which tool could be used to configure BGP on a Tier-0 Gateway?

• A. PowerShell
• B. API
• C. ESX CLI
• D. NSX CLI

Answer: D

NEW QUESTION 2
Which three teaming policy modes are supported by NSX-T Data Center? (Choose three.)

• A. Destination MAC
• B. Load Balanced Source IP
• C. Failover Order
• D. Destination Port
• E. Load Balanced Source MAC
• F. Load Balanced Source

Answer: CEF

NEW QUESTION 3
What are two supported N-VDS modes? (Choose two.)

• A. DPDK Datapath
• B. Overlay Datapath
• C. Secure Datapath
• D. Enhanced Datapath
• E. Standard Datapath

Answer: DE

Explanation:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/installation/GUID-37BC3CEF-DCC1-4C6F-960

NEW QUESTION 4
Which statement describes the VMware Virtual Cloud Network Vision?

• A. Virtual Cloud Network connects and protects virtual machines running in KVM environments.
• B. Virtual Cloud Network connects and protects virtual machines running in vSphere environments.
• C. Virtual Cloud Network connects and protects applications, regardless of their physical locations.
• D. Virtual Cloud Network connects and protects applications and data, regardless of their physical locations.

Answer: D

NEW QUESTION 5
Which CLI command shows syslog on NSX Manager?

• A. show log manager follow
• B. get log-file auth.log
• C. get log-file syslog
• D. /var/log/sysloq/syslog.log

Answer: C

Explanation:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-406AF9C3-E8F7-447A-8E

NEW QUESTION 6
A DevOps user has deployed a Kubernetes Pod in vSphere. What does the term ClusterIP represent within NSX-T?

• A. Deployment of T1 with NLB service.
• B. Deployment of Distributed Router.
• C. Deployment of Distributed Load Balancing service.
• D. Deployment of T0 and T1

Answer: C

NEW QUESTION 7
Which statement Is true regarding the audit user account? (Choose two.)

• A. The admin user must set the password for the audit account to log in to NSX Manager.
• B. The administrator must run the set audit user password <password> command.
• C. The audit user has read-write access to the NSX Manager.
• D. The audit user is disabled by default and must be enabled to log in to the NSX Manager.
• E. The administrator must run the set user audit password <password> command.

Answer: AE

NEW QUESTION 8
Which three protocols could an NSX administrator use to transfer log messages to a remote log server? (Choose three.)

• A. SSL
• B. HTTPS
• C. TLS
• D. UDP
• E. SSH
• F. TCP

Answer: CDF

Explanation:
https://www.vmware.com/content/dam/digitalmarketing/vmware/en/pdf/certification/vmware-2vo-41.20-exam-p

NEW QUESTION 9
An NSX administrator is creating a Tier-1 Gateway configured in Active-Standby High Availability Mode. In the event of node failure, the failover policy should not allow the original failed node to become the Active node upon recovery.
Which failover policy meets this requirement?

• A. Non-Preemptive
• B. Preemptive
• C. Enable Preemptive
• D. Disable Preemptive

Answer: A

NEW QUESTION 10
Which command is used to display the network configuration of the Tunnel Endpoint (TEP) IP on a bare metal transport node?

• A. ifconfig
• B. tcpdump
• C. debug
• D. ipconfig

Answer: A

Explanation:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/installation/GUID-B7E7371E-A9F6-4880-B184

NEW QUESTION 11
Which is correct when deploying a NSX Edge in a KVM only environment?

• A. deploy NSX Edge VM with QCOW2 image
• B. deploy NSX Edge VM with ISO image
• C. deploy NSX Edge on a bare-metal server
• D. deploy NSX Edge VM with OVF template

Answer: C

NEW QUESTION 12
Which command is used to change the NSX CU administrator password?

• A. set user admin password <password> old-password <old-password>
• B. set user admin password <old-password> <new-password>
• C. set user administrator password <old-password> <new-password>
• D. set user administrator password <password> old-password <old-password>

Answer: A

Explanation:
To change the password of an account run:set user admin password my-new-pwd old-password my-old-pwd

NEW QUESTION 13
An NSX administrator has configured a load balancer virtual server on a Tier-1 Gateway.
In order to advertise the load balancer virtual IP to the Tier-0 Gateway, which route advertisement configuration has to be done on the Tier-1 Gateway? (Choose two.)

• A. Advertise All LB SNAT IP Routes
• B. All Static Routes
• C. Information
• D. Advertise All LB VIP Routes
• E. Advertise All NAT Routes

Answer: AD

Explanation:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-EEBA627A-0860-477A-9

NEW QUESTION 14
What is the most restrictive NSX-T built-in role which will allow a user to apply configuration changes on a NSX Edge?

• A. Cloud Service Administrator
• B. Network Engineer
• C. Network Operator
• D. NSX Administrator

Answer: B

NEW QUESTION 15
What are three characteristics of a transport zone? (Choose three.)

• A. defines the potential reach of transport nodes
• B. configured with a Single N-VDS
• C. defines the scope and reachability of a Segment
• D. configured with multiple N-VDS
• E. optional for creating a segment

Answer: ABC

NEW QUESTION 16
How is the intra-tier transit link connection created between SR and DR for a Tier-0 Gateway?

• A. Manually create a gateway interface and mark it as transit.
• B. Automatically created when DR is created.
• C. Automatically created when SR is initialized.
• D. Manually create external uplink interface and mark it as transit.

Answer: C

NEW QUESTION 17
An NSX administrator is configuring the KVM hypervisor host as a transport node and wants to apply the Failover Order as a NIC teaming policy.
Which profile allows the administrator to configure the NIC Teaming policy as Failover Order?

• A. N-VDS/VDS Profile
• B. Transport Node Profile
• C. Host Switch Profile
• D. Uplink Profile

Answer: D

NEW QUESTION 18
Which step must be performed before deploying an additional NSX Manager from the NSX-T UI?

• A. Prepare the ESXi hosts as Transport Nodes.
• B. Configure the Virtual IP of the cluster.
• C. Register vCenter Server as a Compute Manager.
• D. Create an Edge Cluster.

Answer: C

NEW QUESTION 19
Which CLI command is used to disable SSH timeout on NSX Manger and NSX Edge nodes?

• A. set cli ssh timeout 0
• B. set esxcli ssh session off
• C. set cli-timeout 0
• D. nsxcli ssh session on

Answer: C

NEW QUESTION 20
Which to steps must an NSX administrator take to integrate VMware Identity Manager in NSX-T to support role-based access control? (Choose two.)

• A. Create a SAML authentication in VMware Identity Manager using the NSX Manager FQDN.
• B. Add NSX Manager as a Service Provider (SP) in VMware Identity Manager.
• C. Create an OAuth 2.0 client in VMware Identity Manager.
• D. Enter the Identity Provider (IdP) metadata URL in NSX Manager.
• E. Enter the service URL, Client Secret, and SSL thumbprint in NSX Manager.

Answer: CE

NEW QUESTION 21
How is the RouterLink port created between a Tier-1 Gateway and Tier-0 Gateway?

• A. Automatically created when Tier-1 is created.
• B. Manually create a Segment and connect to both Tier-1 and Tier-0 Gateways.
• C. Manually create a Logical Switch and connect to bother Tier-1 and Tier-0 Gateways.
• D. Automatically created when Tier-1 is connected with Tier-0 from NSX UI.

Answer: D

Explanation:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-3F163DEE-1EE6-4D80-B

NEW QUESTION 22
Which network tool cloud an administrator use on an ESXi 7 host to capture packets when troubleshooting connectivity issues?

• A. Wireshark
• B. pktcap-uw
• C. net-stats
• D. tcpdump

Answer: B

Explanation:
If you do when troubleshooting connectivity issues on your Virtualization environment. This post will help you to capture Network traffic on ESXi host using pktcap-uw tool.

NEW QUESTION 23
......