Q1. Which discard digits instruction removes all digits prior to the North American Numbering Plan portion of the route pattern?
A. PreDot
B. PreAt
C. Pre
D. PreNANP
Answer: B
Q2. What is the difference between policing and shaping?
A. Policing: Transmit and mark, then transmit the packets. Shaping: Buffer the exceeding packets.
B. Policing: Transmit the packets. Shaping: Buffer the exceeding packets.
C. Policing: Transmit, drop or mark, then transmit the packets. Shaping: Buffer the exceeding packets.
D. Policing: Buffer the exceeding packets. Shaping: Transmit and mark, then transmit the packets.
Answer: C
Explanation: Reference:
http://www.cisco.com/c/en/us/support/docs/quality-of-service-qos/qos-policing/19645-policevsshape.html
Q3. Which distribution algorithm is used for a route group?
A. Circular, top down.
B. Longest idle, broadcast.
C. Circular, top down, longest idle, broadcast.
D. Top down, broadcast, circular.
Answer: A
Explanation:
Reference:
Page 199
Cisco Unified Communications Manager Administration Guide, Release 10.0(1)
Q4. What is the maximum number of 1080p30 HD Conference Participants if an MSE 8000 has fourMSE8710 blades clustered?
A. 48.
B. 180
C. 720
D. 800
Answer: A
Explanation: Reference:
Page 389
CIPTV110SG_Vol1
Q5. Where do you configure a SIP route pattern?
A. Call Routing > Route/Hunt > SIP Route Pattern
B. System > SIP Route Pattern
C. Call Routing > SIP Route Pattern
D. Advanced Features > SIP Route Pattern
Answer: C
Q6. Which three options are valid digit discard instructions?
A. PreAt.
B. PreDot.
C. Leading#.
D. PostAt.
E. Trailing#.
F. PostDot.
Answer: A,B,E
Explanation: Reference:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/idp/504_423/deploy/dpdg/dpDl Plns.html
Q7. Which groups will have access to the Meet-Me conference numbers that are set to use the <None> partition?
A. Only users that have the <None> partition assigned in their calling search space will have access to the Meet-Me conference numbers.
B. All users will have access to the Meet-Me conference numbers.
C. The <None> partition will prevent all users from accessing the Meet-Me conference numbers.
D. Any IP phones with their lines configured in the <None> partition will have access to the Meet-Me conference numbers.
Answer: B
Q8. Which three options are valid SIP URI formats? (Choose three.)
A. jsmith@cisco.com
B. tel:98765@cisco.com
C. phone:98765@cisco.com
D. sip:12345@10.10.10.10:5060;user=phone
E. sip:bob.cisco.com
Answer: A,B,D
Q9. Refer to the exhibit.
To reach an external number, a user first dials a 9. Which route pattern will be matched if a user dials the toll-free number 18005550123?
A. 911
B. 9.[2-9]XXXXXX
C. 9.1[2-9]XX[2-9]XXXXXX
D. 9.18[0,6-8][0,6-8]XXXXXXX
E. 9.1900XXXXXXX
F. 9011!
Answer: D
Q10. When comparing SIP H.323 and MGCP, which of the following is specific to SIP?
A. The dial plan is directly on the gateway.
B. SIP provides support for third-party entities.
C. SIP defines Translation per the gateway.
D. SIP has a centralized dial plan.
Answer: B
Q11. Refer to the exhibit.
To reach an external number, a user first dials a 9. Which route pattern will be matched if a user dials the toll-free number 18005550123?
A. 911
B. 9.[2-9]XXXXXX
C. 9.1[2-9]XX[2-9]XXXXXX
D. 9.1800XXXXXXX
E. 9.1866XXXXXXX
F. 9.1877XXXXXXX
G. 9.1888XXXXXXX
H. 9.1900XXXXXXX
I. 9011!
Answer: D
Q12. How do you configure calling privileges on Cisco Unified Communications Manager Express?
A. corlist
B. translation profile
C. zones
D. access list
E. search rules
Answer: A
Q13. Which of these media resources can be configured in Cisco Unified Communication manager?
(Choose Three)
A. MOH Server
B. Voice Termination Point DSP
C. Transcoder
D. Auto Attendant
E. Conference Bridge
Answer: A,C,E
Q14. Refer to the exhibit and configuration output.
What are the two main ways from New York to call Extension 6001 in England? (Choose two.)
sh run | s Dial-peer
dial-peer voice 2 voip
destination-pattern 6…
preference 0
session-target ipv4: 200.10.10.5
dtmf-relay sip-notify dial-peer voice 3 pots
destination-pattern 6…
preference 1
port 0/0/0:23
prefix 757385
dtmf-relay sip-notify
A. The first way is WAN.
B. The first way is PSTN.
C. The second way is WAN.
D. The second way is PSTN.
Answer: A,D
Q15. If no SIP dial rules are configured on an IP phone, at which three points in the collection of digits does a Type A SIP phone send digits to the Cisco Unified Communications
Manager? (Choose three.)
A. when the interdigit timer expires
B. when the collected digits match a SIP dial rule
C. when the user presses the Dial softkey
D. as each digit is collected (it is sent for analysis)
E. when the user presses the # key
Answer: A,C,E