Introducing The New!
Surepassexam Collection
Get Unlimited Access to all
Surepassexam's PREMIUM files
Q1. Which DiffServ PHB classification is recommended by Cisco for interactive video traffic?
A. AF31
B. CS3
C. EF
D. AF41
E. CS4
Answer: D
Q2. What are two characteristics of a Cisco Unified Communications Manager Express dial plan? (Choose two.)
A. partitions and calling search spaces
B. COR
C. dial peers
D. voice translation rules
E. route patterns
Answer: B,C
Q3. Which protocol is recommended to be used between Cisco Unified Communications Manager and thevoice gateway to simplify the dial plan?
A. SIP.
B. SCCP.
C. H323.
D. RSVP.
E. MGCP.
Answer: E
Q4. You are a Voice Engineer at ABC Company. You want to implement a voice translation profile to perform the following manipulation: The incoming DNIS 9876562XXX should be modified to 2XXX. Which four commands are required to configure the translation profile? (Choose four.)
A. voice translation-rule 1
B. rule 1 /^ 9876562/ /2/
C. voice translation-profile incoming-calls
D. translate called 1
E. rule 1 /^ 9876562$/ /2/ type subscriber
F. translation-profile incoming incoming-calls
G. translate calling 1
H. translate called rule 1
Answer: A,B,C,D
Q5. Refer to the exhibit.
Which calling search space has the highest priority?
A. Phone Configuration > Calling Search Space: CSS_Internos.
B. Phone Configuration > Calling Search Space: CSS_Locales.
C. Directory Number Configuration > Calling Search Space: CSS_Locales.
D. Directory Number Configuration > Calling Search Space: CSS_Internos.
Answer: C
Q6. If the route patterns 5XXX, 51XX, 513X and 5134 exist within a call route database, which pattern would be matched if the dialed number was 5324?
A. 5XXX
B. 51XX
C. 513X
D. 5134
Answer: A
Q7. Which of these media resources can be configured in Cisco Unified Communication manager?
(Choose Three)
A. MOH Server
B. Voice Termination Point DSP
C. Transcoder
D. Auto Attendant
E. Conference Bridge
Answer: A,C,E
Q8. When dialing 1234, which rule is matched first?
A. route pattern 1XXX
B. route pattern 12[123]X
C. translation pattern 12[123]X
D. translation pattern 1XXX
E. directory number 12345
Answer: C
Explanation: Reference:
http://www.ciscopress.com/articles/article.asp?p=1745737&seqNum=3
Q9. If the route patterns 5XXX, 51XX, 513X, and 5134 exist within a call route database, which pattern would be matched if the dialed number was 5124?
A. 5XXX
B. 51XX
C. 513X
D. 5134
Answer: B
Q10. What is the relationship between a Region and a Location?
A. The Region codec parameter is used between a Region and its configured Locations.
B. The Region setting for a Location sets the number of audio and video calls that Location can support.
C. The codec parameter configured in the Region is only used between Regions and Location bandwidth isonly used between Locations.
D. The Region codec parameter is combined with Location bandwidth when communicating with otherRegions.
Answer: C
Q11. Which three statements about the default VoIP dial peer are true? (Choose three.)
A. VAD is disabled.
B. RSVP is not supported.
C. Only the G.711 codec is supported.
D. The G.729 and G.711 codecs are supported.
E. Fax-rate service is supported.
F. DTMF relay is supported.
Answer: B,D,E
Q12. Which two codecs are the best codecs to use in WAN and LAN? (Choose two.)
A. WAN codec G.711
B. LAN codec G.729
C. WAN codec G.729
D. LAN codec G.711
Answer: C,D
Q13. Which three steps must you take on Cisco Unified Communications Manager to configure
Cisco TelePresence Conductor for ad hoc and rendezvous conferences? (Choose three.)
A. Verify the location configuration.
B. Verify the certificate trusts.
C. Configure one ICT trunk to TelePresence Conductor.
D. Configure one SIP trunk to TelePresence Conductor.
E. Configure two ICT trunks to TelePresence Conductor.
F. Configure two SIP trunks to TelePresence Conductor.
Answer: A,B,F
Q14. How are Cisco Unified CallManager location parameters used?
A. Assign directory numbers to devices as they connect to the IP telephony network.
B. Specify the bandwidth used for audio and video calls.
C. Implement call admission control in a centralized call processing deployment.
D. Provide alternate call routing when the primary call path is unavailable.
Answer: C
Q15. When local route groups are used and a user dials 918005551212, what component is ultimately used to route the digits to the local gateway?
A. The route list applied to the route pattern
B. The device pool of the calling device
C. The translation pattern
D. The gateway or route list associated with the +.! route pattern
Answer: B