Introducing The New!
Surepassexam Collection
Get Unlimited Access to all
Surepassexam's PREMIUM files
Q1. Which process can localize a global E.164 with + prefix calling numbers for inbound calls to an IP phone so that users see the calling number in a local format?
A. Calling number localization is done using translation patterns.
B. Calling number localization is done using route patterns.
C. Calling number localization is done by configuring a calling party transformation CSS at the phone.
D. Calling number localization is done by configuring a calling party transformation CSS at the gateway.
E. Calling number localization is done by configuring the phone directory number in a localized format.
Answer: C
Q2. Enabling authentication and encryption for CTI, JTAPI, and TAPI applications requires which two tasks? (Choose two.)
A. Enter the encryption key into the application.
B. Set up an IPsec association between the application and Cisco Unified CallManager.
C. Configure related security parameters in the CTI, JTAPI, and TAPI application.
D. Add the application user or end users to the Standard CTI Secure Connection user group, Standard CTI Allow Reception of SRTP Key Material user group, and Standard CTI Enabled user group.
Answer: C,D
Explanation:
Incorrect Answer: A, B You must also add the application users or the end users to the Standard CTI Secure Connection user group in Cisco Unified Communications Manager Administration to enable TLS for the application. After you add the user to this group and install the certificate, the application ensures that the user connects via the TLS port. Link:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/security/8_6_1/secugd/secucti.htm l#wp1166397
Q3. What is the difference between an MGCP gateway and a SIP gateway?
A. An MGCP gateway that dial peers be configured before PSTN calls can be placed and received. The SIP gateway requires no dial peers.
B. An MGCP gateway can be added in Cisco Unified Communications Manager under the Gateway Type field using the gateway model. The SIP gateway can connect to Cisco Unified Communications Manager only through a SIP trunk.
C. A SIP gateway requires a call agent for PSTN calls to be placed and received. An MGCP gateway does not require a call agent for PSTN calls to be placed and received.
D. An MGCP gateway can register with Cisco Unified Communications Manager. A SIP gateway will show status of "Unknown".
E. The SIP gateway must be configured in Cisco Unified Communications Manager using a valid IP address on the gateway. The MGCP gateway must be configured in Cisco Unified
Communications Manager using the domain name.
Answer: B
Q4. Scenario
There are two call control systems in this item. The Cisco UCM is controlling the Cisco Jabber for Windows Client, and the 7965 and 9971 Video IP Phone. The Cisco VCS is controlling the SX20, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows.
Use the exhibits to answer the following questions.
DP
Locations
CSS
Movi Failure
Movi Settings
CIPTV Topo
Subzone
Links
Pipe
What two issues could be causing the Cisco Jabber Video for TelePresence failure shown in the exhibit? (Choose two.)
A. Incorrect username and password
B. Wrong SIP domain configured.
C. User is not associated with the device.
D. IP or DNS name resolution issue.
E. CSF Device is not registered.
F. IP Phone DN not associated with the user.
Answer: B,D
Q5. When a SIP trunk is added for Call Control Discovery, which statement is true?
A. The SIP trunk is added by selecting SIP Trunk and SIP Protocol. The Enable SAF check box should be selected.
B. The SIP trunk is added by selecting SIP Trunk and SIP Protocol. The Trunk Service Type should be Call Control Discovery.
C. The SIP trunk is added by selecting Call Control Discovery Trunk and then selecting SIP as the protocol to be used.
D. The SIP trunk is added by selecting SIP Trunk and SIP Protocol. The destination IP address field is configured as ‘SAF’ to indicate that this trunk is used for SAF.
Answer: B
Q6. Refer to the exhibit.
Assume that NANP is being used and 9 is used for PSTN access code Long distance national calls are preceded with 1.
How should the HQ Cisco Unified Communications Manager be configured for calls to 3XXX to be sent to the gatekeeper at 1 0 1 6 1 with PSTN backups?
A. Configure a route pattern for 3XXX Assign this route pattern to a route list that points to two route groups The first route group contains the H 225 trunk The second route group contains the MGCP gateway with prefix digits 1 408555 for the outgoing called number.
B. Configure a route pattern for 1#3XXX Assign this route pattern to a route list that points to a route group that lists the H 225 trunk as first choice and the MGCP gateway as a second choice.
C. Configure a route pattern for 4085543XXX. Assign this route pattern to a route list that points to two route groups. The first route group contains the H 226 trunk The second route group contains MGCP gateway.
D. Configure a route pattern for 3XXX Assign this route pattern to a route list that points to two route groups The first route group contains the H 225 trunk The second route group contains MGCP gateway with prefix digits 91 408554 for the called number.
Answer: A
Explanation:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmcfg/b03rtgrp.html #wpxref46617
Q7. Which two statements about the functionality of a gatekeeper are true? (Choose two.)
A. Cisco Unified Communications Manager has gatekeeper functionality built in.
B. Cisco Unified Communications Manager registers with a gatekeeper via SIP.
C. Cisco Unified Communications Manager registers with a gatekeeper via H.323.
D. A gatekeeper can enable CAC and AAR.
E. A gatekeeper can enable CAC, but not AAR.
Answer: C,E
Q8. Which two options for a Device Mobility-enabled IP phone are true? (Choose two.)
A. The phone configuration is not modified.
B. The roaming-sensitive parameters of the current (that is, the roaming) device pool are applied.
C. The user-specific settings determine which location-specific settings are downloaded from the Cisco Unified Communications Manager device pool.
D. If the DMGs are the same, the Device Mobility-related settings are also applied.
Answer: B,D
Q9. Scenario
There are two call control systems in this item. The Cisco UCM is controlling the DX650, the Cisco Jabber for Windows Client, and the 9971 Video IP Phone. The Cisco VCS and TMS control the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows.
Use the exhibits to answer the following questions.
DP
Locations
CSS
SRST
SRST-BR2 Config
BR2 Config
SRSTPSTNCall
After adding SRST functionality the SRST does not work. After reviewing the exhibits, which of the following reasons could be causing this failure?
A. Device Pool cannot be default.
B. The Cisco UCM is pointing to the wrong IPv4 address of the BR router.
C. The router does not support SRST.
D. The SRST enabled router is not configured correctly.
Answer: A
Q10. Which configuration command disables the secondary dial tone on the branch office ISR for users calling from the PSTN into the branch office during a WAN failure?
A. direct-inward-dial
B. voice translation-rule
C. incoming called-number
D. application
Answer: A
Q11. The administrator at Company X is trying to set up Extension Mobility and has done these steps:
-Set up end users accounts for the users who need to roam
-Set up a device profile for the type of phones users will be allowed to log in Users have reported to the administrator that they are unable to log in to the phones
designated for Extension Mobility. Which two options are the two reasons for this issue? (Choose two.)
A. The user device profile is not associated to the correct end user.
B. The username must be numeric only and must match the DN.
C. The Extension Mobility service has not been enabled under the Cisco Unified Serviceability Page.
D. Extension Mobility has not been enabled under Enterprise Parameters.
E. The user must ensure that their main endpoint is online and registered, otherwise they cannot log in elsewhere.
Answer: A,C
Q12. Refer to the exhibit.
How many calls are permitted by the RSVP configuration?
A. one G.711 call
B. two G.729 calls
C. one G.729 call and one G.711 call
D. eight G.729 calls
E. four G.729 calls
Answer: B
Explanation:
Incorrect Answer: A, C, D, E In performing location bandwidth calculations for purposes of call admission control, Cisco Unified Communications Manager assumes that each call stream consumes the following amount of bandwidth:
.G.711 call uses 80 kb/s.
.G.722 call uses 80 kb/s.
.G.723 call uses 24 kb/s.
.G.728 call uses 26.66 kb/s.
.G.729 call uses 24 kb/s.
Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a02cac.html #wpxref28640
Q13. This is the configuration on the voice gateway:
telephony-service
max-ephones 30
max-dn 60 preference 0
srst mode auto-provision all
srst dn line-mode dual
srst dn template 3 srst ephone description
srst fallback auto-provision phone
srst ephone template 5
Which ephone-dn would be expected upon activation of SRST?
A. ephone-dn 1 dual-linenumber 7001description 7001name 7001ephone-dn-template 5This DN is learned from srst fallback ephones
B. ephone-dn 1 dual-linenumber 7001description 7001name 7001ephone-dn-template 3This DN is learned from srst fallback ephones
C. ephone-dn 1number 7001description 7001name 7001ephone-dn-template 5This DN is learned from srst fallback ephones
D. ephone-dn 1number 7001description 7001name 7001ephone-dn-template 3This DN is learned from srst fallback ephones
Answer: A
Q14. When an incoming PSTN call arrives at an MGCP gateway, how does the called number get normalized to an internal directory number in Cisco Unified Communications Manager?
A. Normalization is done by configuring the significant digits for inbound calls on the MGCP gateway.
B. Normalization is done using route patterns.
C. Normalization is done using the gateway incoming called party prefixes based on number type.
D. Normalization is done using the gateway incoming calling party prefixes based on number type.
E. Normalization is achieved by local route group that is assigned to the MGCP gateway.
Answer: A
Q15. Which E.164 transformation pattern represents phone numbers in Germany?
A. \+49.!
B. 49.!
C. \49.!
D. \+49.X
Answer: A