Introducing The New!
Surepassexam Collection
Get Unlimited Access to all
Surepassexam's PREMIUM files
P.S. Practical 300-075 preparation exams are available on Google Drive, GET MORE: https://drive.google.com/open?id=1wjr6WINeoF1GfJJTEUwbsPxy_oz_OK6s
Q4. What is the purpose of a SAF Client?
A. To decode address information and route calls to and from the end points
B. To pass IP information from the CUCM to the endpoint
C. To learn about and advertise or subscribe information about SAF network services
D. To reside in the Cisco IOS software, and to communicate with the SAF forwarder
Answer: C
Q5. Which two locations are the best locations that an end user can use to determine if an IP phone is working in SRST mode? (Choose two.)
A. Cisco Unified Communications Manager Administration
B. IP phone display
C. Cisco Unified SRST Router
D. Cisco Unified MGCP Fallback Router
E. physical IP phone settings
Answer: B,E
Explanation: Incorrect: ACD
IP Phone display and Physical phone IP settings are two locations were an end user can determine if an IP phone is working in SRST mode.
Link: http://my.safaribooksonline.com/book/telephony/1587050757/survivable-remote-site-telephony-srst/529
Q6. How many hosted DN patterns per cluster does Cisco Unified Communications Manager allow you to configure?
A. 500
B. 1000
C. 1500
D. 2000
E. 2500
F. 5000
Answer: D
Q7. Which three of the following are steps in configuring MGCP Fallback and Cisco Unified SRST? (Choose three)
A. Define the SRST reference for phones in the Device Pool configuration
B. Enable and configure the MGCP fallback and Cisco Unified SRST features on the IOS gateways.
C. Implement a simplified SRST dial plan on the remote-site-gateways to ensure connectivity for remote-site phones in SRST mode.
D. Enable SIP trunking between both remote and hub sites to provide mesh coverage.
E. Define the SRST reference in the configuration on the IP Phones.
F. Enable and configure the MGCP fallback on the IOS gateway but not Cisco Unified SRST since it is enabled automatically.
Answer: A,B,C
Q8. You are deploying a remote office setup that connects with Cisco Unity Communications Manager at a hub location. You have an available dedicated bandwidth of 20% from the 2- Mb/s WAN circuit for VoIP that supports a maximum of 17 calls. Which codec do you configure in Cisco Unity Communications Manager to achieve this?
A. G.722
B. G.711
C. G.729
D. iSAC
E. GSM-FR
F. iLBC
Answer: C
Q9. Which statement is true regarding the configuration of SAF Forwarder?
A. In a multisite dial plan, SAF Forwarders may exist in multiple autonomous systems.
B. The client label that is configured in Cisco Unified Communications Manager must match the configuration on the SAF Forwarder router.
C. There should not be multiple nodes of Cisco Unified Communications Manager clusters acting as SAF clients.
D. The destination IP address must match the loopback address of the SAF router.
Answer: A
Q10. Which action configures CAC utilizing only Cisco Unified Communications Manager software?
A. Configure Cisco Unified Communications Manager regions.
B. Configure Cisco Unified Communications Manager locations.
C. Configure Cisco Unified Communications Manager RSVP-enabled locations.
D. Configure Cisco Unified Communications Manager MTPs.
Answer: B
Q11. Refer to the exhibit.
The remote site needs to run multicast MOH from flash. Which statement about the MOH server configuration in Cisco Unified Communications Manager is true?
A. The MOH server must be enabled for G.729 in the Cisco IP Voice Media Streaming Application service parameters.
B. Multicast MOH can use only G.711. So you must configure the command codec G711ulaw under the call-manager-fallback configuration at the remote site router.
C. The MOH for the remote site is a standalone configuration. No extra configuration is required on the Cisco Unified Communications Manager MOH server.
D. Configure a separate region for the MOH server. The codec between the MOH region and all other regions should be specified as G.711. Apply the MOH region through a device pool at the MOH server configuration page.
E. Configure the location setting for the MOH server to 80 Kbps. This configuration forces the MOH server to use G.711 for the remote site.
Answer: D
Q12. What are the two tasks that you must perform to configure the Service Advertisement Framework forwarder in Cisco Unified Communications Manager? (Choose two.)
A. create VPN groups
B. create VPN profiles
C. create a new Service Advertisement Framework security profile
D. set feature configuration parameters of Call Control Discovery
E. configure Service Advertisement Framework forwarder information
F. enable enterprise parameter for Service Advertisement Framework forwarder
Answer: C,E
Q13. Which of the following are two functions that ensure that the telephony capabilities stay operational in the remote location Cisco Unified SRST router? (Choose two)
A. Automatically detecting a failure in the network.
B. Initiating a process to provide call-processing backup redundancy.
C. Notifying the administrator of an issue for manual intervention.
D. Proactively repairing issues in the voice network.
Answer: A,B
Recommend!! Get the Practical 300-075 dumps in VCE and PDF From Certleader, Welcome to download: https://www.certleader.com/300-075-dumps.html (New 420 Q&As Version)