Cisco 300-075 Free Practice Questions

Q1. Which task must you perform before deleting a transcoder? 

A. Delete the dependency records. 

B. Unassign it from a media resource group. 

C. Use the Reset option. 

D. Remove the device pool. 

E. Remove the subunit. 

F. Delete the common device configuration. 

View Answer

Q2. Which symbol is required for globalized call routing? 

A. + 

B. * 

C. % 

D. / 

E. ; 

View Answer

Q3. Which functionality does ILS use to link all hub clusters in an ILS network? 

A. Fullmesh 

B. Automesh 

C. ILS updates 

D. multicast 

View Answer

Q4. Refer to the exhibit. 

Assume that NANP is being used and 9 is used for PSTN access code Long distance national calls are preceded with 1. 

How should the HQ Cisco Unified Communications Manager be configured for calls to 3XXX to be sent to the gatekeeper at 1 0 1 6 1 with PSTN backups? 

A. Configure a route pattern for 3XXX Assign this route pattern to a route list that points to two route groups The first route group contains the H 225 trunk The second route group contains the MGCP gateway with prefix digits 1 408555 for the outgoing called number. 

B. Configure a route pattern for 1#3XXX Assign this route pattern to a route list that points to a route group that lists the H 225 trunk as first choice and the MGCP gateway as a second choice. 

C. Configure a route pattern for 4085543XXX. Assign this route pattern to a route list that points to two route groups. The first route group contains the H 226 trunk The second route group contains MGCP gateway. 

D. Configure a route pattern for 3XXX Assign this route pattern to a route list that points to two route groups The first route group contains the H 225 trunk The second route group contains MGCP gateway with prefix digits 91 408554 for the called number. 

View Answer

Q5. Company X has deployed a VCS Control with a local zone and a traversal client zone. To facilitate external calls, VCS Expressway is deployed and traversal server zone is set up there. Video endpoints inside Company X have registered but are unable to receive calls from outside endpoints. Which option could be the cause of this issue? 

A. The access control list on the VCS Control must be updated with the IP for the external users. 

B. When a traversal zone is set up on VCS Control only outbound calls are possible. 

C. The local zone on the VCS Control does not have a search rule configured. 

D. The traversal zone on the VCS Control does not have a search rule configured. 

View Answer

Q6. Refer to the exhibit. 

Which option describes the effect of this configuration? 

A. It implements Cisco United CME redundancy. 

B. It creates dial peers. 

C. It configures failover. 

D. It configures a standby Cisco United CME. 

E. It implements HSRP. 

F. It implements Cisco IOS redundancy. 

View Answer

Q7. Which three devices support the SAF Call Control Discovery protocol? (Choose three.) 

A. Cisco Unified Border Element 

B. Cisco Unity Connection 

C. Cisco IOS Gatekeeper 

D. Cisco Catalyst Switch 

E. Cisco IOS Gateway 

F. Cisco Unified Communications Manager 

View Answer

Q8. Which statement about the function of a gatekeeper is true? 

A. A gatekeeper improves call routing between servers within a single Cisco Unified Communications Manager cluster. 

B. A gatekeeper can replace the dial plan of a Cisco Unified Communications Manager cluster. 

C. A gatekeeper can simplify the dial plan between many different Cisco Unified Communications Manager clusters. 

D. Gatekeepers can be implemented to deploy RSVP-based CAC. 

View Answer

Q9. When an external call is placed from Ajax, they would like the ANI that is sent to the PSTN to be the main number, not the extension. For domestic calls, they would like 10 digits sent; for international calls, they would like to send the country code 1 and the 10 digits. How can this be accomplished? 

A. Add a translation pattern to the dial peers in the gateway that adds the appropriate digits to the outgoing ANI. 

B. In the external call route patterns, set the external phone number mask to the main number. Use 10 digits in the domestic route pattern and 1 followed by the main number digits in the international route patterns. 

C. Use a calling party transform mask for each route group in the corresponding route list configuration. Set the explicit 10-digit main number for domestic calls and 1 followed by the main number for the international route patterns. 

D. In the directory number configurations, set the prefix digits field to the country code and the 10 digits of the main number. This will be truncated to the 10-digit number for domestic calls and sent out in its entirety for international calls. 

View Answer

Q10. Refer to the exhibit. 

When a call between two HQ users is being conferenced with a remote user at BR, which configuration is needed? 

A. The BR_MRG must contain the transcoder device. The BR_MRGL must be assigned to the BR phones. 

B. The HQ_MRG must contain the transcoder device. The HQ_MRGL must be assigned to the HQ phones. 

C. A transcoder should be configured at the remote site and assigned to all remote phones through the BR_MRGL. 

D. The HQ_MRG must contain the transcoder device. The HQ_MRGL must be assigned to the software conference bridge. 

E. Enable the software conference bridge to support the G.711 and G.729 codecs in Cisco Unified Communications Manager Service Parameters. 

View Answer

Q11. Which command can be used to manually send the MGCP gateway to register with the secondary Cisco Unified Communications Manager server? 

A. ccm-manager switchover-to-backup 

B. mgcp use backup 

C. ccm-manager register backup 

D. not supported 

View Answer

Q12. What is the purpose of a SAF Client? 

A. To decode address information and route calls to and from the end points 

B. To pass IP information from the CUCM to the endpoint 

C. To learn about and advertise or subscribe information about SAF network services 

D. To reside in the Cisco IOS software, and to communicate with the SAF forwarder 

View Answer

Q13. What command is used to map internal extensions to the corresponding E.164 PSTN number when using Cisco Unified Communications Manager Express in SRST mode? 

A. ephone-dn 

B. dialplan-pattern 

C. number 

D. number-e.164 

E. ephone-transnumber 

View Answer

Q14. Which statement is true when device mobility mode is enabled or disabled in the Phone 

Configuration window? 

A. The device mobility mode phone settings take precedence over the service parameter settings. 

B. The service parameter settings take precedence over the device mobility mode phone settings. 

C. The combined service parameter settings and the device mobility mode phone settings will be used. 

D. The default settings will be used due to the conflicts. 

View Answer

Q15. Refer to the exhibit: 

The exhibit shows a SAF Forwarder configuration attached to a Cisco Unified Communications Manager. 

Which minimum configuration for a Cisco Unified Communications Manager Express SAF Forwarder is needed to establish a SAF neighbor relationship with this SAF Forwarder? 

A. router eigrp SAFiservice-family ipv4 autonomous-system 1!topology baseexit-sf-topologyexit-service-familyvoice service safprofile trunkroute 1session protocol sip interface Loopback1 transport tcp port 5060! 

B. router eigrp SAF!service-family ipv4 autonomous-system 1!topology baseexit-sf-topologyexit- service-family!voice service safprofile trunk-route 1session protocol sip interface Loopback1 transport tcp port 5060!profile dn-block 1 alias-prefix 1972555pattern 1 type extension 4xxx!profile callcontrol 1dn-servicetrunk-route 1dn-block 1dn-block 2!channel 1 vrouter SAF asystem 1subscribe callcontrol wildcardedpublish callcontrol 1! 

C. router eigrp SAF!service-family ipv4 autonomous-system 1!topology baseexit-sf-topologyexit-service-family! 

D. None of above configurations contain sufficient information. 

View Answer