Cisco 300-075 Free Practice Questions

Q1. What user profile is used to define the settings for a user on login? 

A. Device Profile 

B. Group Profile 

C. Pool Profile 

D. Specific Profile 

View Answer

Q2. Which three options are supplementary services that are affected by MTP? (Choose three.) 

A. Call Hold 

B. Call Transfer 

C. Call Park 

D. Call Pickup 

E. Speed Dial 

F. Call Back 

View Answer

Q3. Which action configures transcoding resources in Cisco Unified Communications Manager to function with branch office Cisco IP Phones? 

A. Configure the branch office IP phones with CSS and partitions. 

B. Configure the branch office IP phones with MRGs and MRGLs. 

C. Configure the branch office IP phones with regions. 

D. Configure the branch office IP phones with locations. 

View Answer

Q4. Refer to the exhibit. 

Locations-based CAC has been configured between HQ and the BR site. Assume that the priority queue has been provisioned correctly for three G.729 calls. What happens when 

the fourth call is placed from HO to BR? 

A. The call will get through via the WAN. But it will experience poor audio quality. 

B. The call will fail. 

C. The call will be queued until one of the existing calls drop. 

D. The call will get through without any issues. 

View Answer

Q5. A voice-mail product that supports only the G.711 codec is installed in headquarters. 

Which action allows branch Cisco IP phones to function with voice mail while using only the G.729 codec over the WAN link to headquarters? 

A. Configure Cisco Unified Communications Manager regions. 

B. Configure transcoding within Cisco Unified Communications Manager. 

C. Configure transcoding resources in Cisco IOS and assign to the MRGL of Cisco IP phones. 

D. Configure transcoder resources in the branch Cisco IP phones. 

View Answer

Q6. Which two statements about SAF service identifier numbers are true? (Choose two.) 

A. They are generated in the format service:sub-service:instance.instance.instance.instance. 

B. They are 16-bit decimal identifiers. 

C. They are generated in the format data-source:sub-service:instance.matrix.fifty.saf. 

D. They are 32-bit decimal identifiers. 

E. They are generated in the format data.saf.cucm-publisher.asf@domain.local. 

F. They are generated in the format telco.cisco.saf-forwader.db.replicate.data.local. 

View Answer

Q7. You are the Cisco Unified Communications Manager in Certpaper.com. You use a remote site MGCP gateway to provide redundancy when connectivity to the central Cisco Unified Communications Manager cluster is lost. How to enable IP phones to establish calls to the PSTN when they have registered with the gateway? (Choose three.) 

A. POTS dial peers must be added to the gateway to route calls from the IP phones to the PSTN. 

B. The default service must be enabled globally. 

C. The command ccm-manager mgcp-fallback must be configured. 

D. COR needs to be configured to disallow outbound calls. 

View Answer

Q8. Which two options for a Device Mobility-enabled IP phone are true? (Choose two.) 

A. The phone configuration is not modified. 

B. The roaming-sensitive parameters of the current (that is, the roaming) device pool are applied. 

C. The user-specific settings determine which location-specific settings are downloaded from the Cisco Unified Communications Manager device pool. 

D. If the DMGs are the same, the Device Mobility-related settings are also applied. 

View Answer

Q9. If your IP telephony administrator asks you to configure a local zone for your dial plan to control the volume of calls between two end points in a centralized multisite environment, which two types of Call Admission Control can be implemented? (Choose two.) 

A. locations based 

B. automated alternate routing 

C. gatekeeper based 

D. SRST 

E. Cisco Unified Communications Manager based 

View Answer

Q10. Which minimum configuration is needed for the SAF Internal Client to register with this SAF Forwarder? 

A. router eigrp SAF!service-family ipv4 autonomous-system 1!topology baseexit-sf-topologyexit-service-family!voice service safprofile trunk-route 1session protocol sip interface Loopbackl transport tcp port 5060i 

B. router eigrp SAF!service-family ipv4 autonomous-system 1!topology baseexit-sf-topologyexit-service-family!voice service safprofile trunk-route 1session protocol sip interface Loopbackl transport tcp port 5060!profile dn-block 1 alias-prefix 1972555pattern 1 type extension 4xxx!profile callcontrol 1dn-servicetrunk-route 1dn-block 1dn-block 2i 

C. router eigrp SAF!service-family ipv4 autonomous-system 1!topology baseexit-sf-topologyexit-service-family!voice service safprofile trunk-route 1session protocol sip interface Loopbackl transport tcp port 5060!profile dn-block 1 alias-prefix 1972555pattern 1 type extension 4xxx!profile callcontrol 1dn-servicetrunk-route 1dn-block 1dn-block 2!channel 1 vrouter SAF asystem 1subscribe callcontrol wildcardedpublish callcontrol 1i 

D. router eigrp SAF!service-family ipv4 autonomous-system 1!topology baseexit-sf-topologyexit-service-family!voice service saf!channel 1 vrouter SAF asystem 1 

E. router eigrp SAF!service-family ipv4 autonomous-system 1!topology base exit-sf-topologyexit-service-family i 

View Answer

Q11. Which three of the following are steps in configuring MGCP Fallback and Cisco Unified SRST? (Choose three) 

A. Define the SRST reference for phones in the Device Pool configuration 

B. Enable and configure the MGCP fallback and Cisco Unified SRST features on the IOS gateways. 

C. Implement a simplified SRST dial plan on the remote-site-gateways to ensure connectivity for remote-site phones in SRST mode. 

D. Enable SIP trunking between both remote and hub sites to provide mesh coverage. 

E. Define the SRST reference in the configuration on the IP Phones. 

F. Enable and configure the MGCP fallback on the IOS gateway but not Cisco Unified SRST since it is enabled automatically. 

View Answer

Q12. When device mobility mode is enabled or disabled for a cluster, to which does the cluster setting apply? 

A. all phones in the cluster that support device mobility 

B. all phones in the cluster that subscribed to device mobility 

C. mobile phones in the cluster that support device mobility 

D. mobile phones in the cluster that are in default mode 

View Answer

Q13. What is the fastest way for an engineer to test the implementation of SRST in a production environment? 

A. Shut down the Cisco Unified Communications Manager Servers. 

B. Shut down the switch ports connected to the Cisco Unified Communications Manager Servers. 

C. Add a null route to the publisher Cisco Unified Communications Manager at the remote router. Remove the null route when the operation is verified. 

D. Unplug the IP phones from their switch ports. 

E. Verification is not needed. 

View Answer

Q14. Refer to the exhibit. 

Which configuration elements must match for adjacent neighbors to establish a SAF neighbor relationship? 

A. the label name specified in the router eigrp command 

B. the autonomous-system number specified in the service-family ipv4 autonomous-system command 

C. the sf-interface configuration 

D. the topology base configurations 

E. the label name specified in the router eigrp command and the autonomous-system number 

View Answer

Q15. Where do you specify the device mobility group and physical location after they have been configured? 

A. phones 

B. DMI 

C. device mobility CSS 

D. device pool 

E. MRGL 

F. locale 

View Answer