Introducing The New!
Surepassexam Collection
Get Unlimited Access to all
Surepassexam's PREMIUM files
P.S. Exact 300-101 faq are available on Google Drive, GET MORE: https://drive.google.com/open?id=1g4kPItyKIZuA3JfCSZX112aKL18D2zfl
Q1. What two situations could require the use of multiple routing protocols? (Choose two)
A. when using UNIX host-based routers
B. when smaller broadcast domains are desired
C. because having multiple routing protocols confuses hackers
D. when migrating from an older Interior Gateway Protocol (IGP) to a new IGP
E. when all equipment is manufactured by Cisco
F. when there are multiple paths to destination networks
Answer: A,D
Explanation:
Simple routing protocols work well for simple networks, but networks grow and become more complex. While running a single routing protocol throughout your entire IP internetwork is desirable, multiprotocol routing is common for a number of reasons, including company mergers, multiple departments managed by multiple network administrators, multivendor environments, or simply because the original routing protocol is no longer the best choice. Often, the multiple protocols are redistributed into each other during a migration period from one protocol to the other.
Q2. Which two statements about NetFlow version 9 are true?
A. IT supports ingress flows only.
B. It is cisco proprietary technology.
C. It supports ingress and egress flows.
D. It is IETF standards based.
E. IT supports egress flows only.
F. It is IEEE standards based.
Answer: B,C
Q3. Refer to the exhibit.
Based on the output, which option is the next hop to get to the 130.0.1.0/24 network?
A. 10.30.30.1
B. 10.0.11.1
C. 10.20.20.1
D. 10.10.10.1
Answer: C
Q4. What is the function of the snmp-server enable traps and snmp-server host 192.168.1.3 trap version 1c public commands?
A. to allow only 192.168.1.3 to access the system using the community-string public.
B. to collect information about the system on a network management server.
C. to disable all SNMP informs that are on the system
D. to allow private communications between the router and the host.
Answer: A
Q5. A user is having issues accessing file shares on a network. The network engineer advises the user to open a web browser, input a prescribed IP address, and follow the instructions. After doing this, the user is able to access company shares. Which type of remote access did the engineer enable?
A. EZVPN
B. IPsec VPN client access
C. VPDN client access
D. SSL VPN client access
Answer: D
Q6. Refer to the exhibit. Will redistributed RIP routes from OSPF Area 2 be allowed in Area 1?
A. Because Area 1 is an NSSA, redistributed RIP routes will not be allowed.
B. Redistributed RIP routes will be allowed in Area 1 because they will be changed into type 5 LSAs in Area 0 and passed on into Area 1.
C. Because NSSA will discard type 7 LSAs, redistributed RIP routes will not be allowed in Area 1.
D. Redistributed RIP routes will be allowed in Area 1 because they will be changed into type 7 LSAs in Area 0 and passed on into Area 1.
E. RIP routes will be allowed in Area 1 only if they are first redistributed into EIGRP.
Answer: A
Explanation:
The following are several area types that are possible on OSPF:
Q7. During which DMVPN phase is spoke-to-spoke communication enabled?
A. Phase 1
B. Phase 6
C. Phase 5
D. Phase 2
E. Phase 4
Answer: D
Q8. For security purposes, an IPv6 traffic filter was configured under various interfaces on the local router. However, shortly after implementing the traffic filter, OSPFv3 neighbor adjacencies were lost. What caused this issue?
A. The traffic filter is blocking all ICMPv6 traffic.
B. The global anycast address must be added to the traffic filter to allow OSPFv3 to work properly.
C. The link-local addresses that were used by OSPFv3 were explicitly denied, which caused the neighbor relationships to fail.
D. IPv6 traffic filtering can be implemented only on SVIs.
Answer: C
Q9. Which two technologies can encapsulate an IPv6 payload in an IPv4 packet for transmission across a network? (Choose two)
A. L2TPv3
B. trunking
C. AToM
D. ISATAP
E. NAT-PT
Answer: D,E
Q10. Which two options are limitations of stateful NAT64? (Choose two)
A. It is unable to route VRF traffic.
B. IT is unable to route multicast traffic.
C. It supports FTP traffic only with an ALG.
D. It supports DNS64 only.
E. Layer 4 supports TCP only
Answer: B,E
100% Most up-to-date Cisco 300-101 Questions & Answers shared by Surepassexam, Get HERE: https://www.surepassexam.com/300-101-exam-dumps.html (New 745 Q&As)