Cisco 300-160 Free Practice Questions

NEW QUESTION 1
You need to ensure that VXLAN connectivity can survive a chassis failure in a vPC configuration using Cisco Nexus 9300 Series switches. Which address type should be bound to the VLAN NVE tunnel for VTEP to ensure resiliency?

• A. anycast
• B. unicast
• C. multicast
• D. broadcast

Answer: A

NEW QUESTION 2
You are configuring a switch as a LISP xTR. You plan to use the LISP xTR when deploying redundant map servers. Which action do you take?

• A. Register the LISP xTR to the anycast IP address of the map resolver.
• B. Register the LISP xTR to the IP address of each map server
• C. Configure the map notify group command by using the anycast IP address of the map resolver
• D. Configure the map-notify group command by using the IP address of each map server

Answer: C

NEW QUESTION 3
You use Cisco UCS Central to manage Cisco UCS. Which statement accurately describes how local and global policies are applied?

• A. A local policy is applied by using Cisco UCS Central, and a global policy is applied by using Cisco UCS Director.
• B. A local policy is applied by using Cisco UCS Manager, and a global policy is applied by using Cisco UCS Central.
• C. A local policy is applied by using Cisco UCS Director, and a global policy is applied by using Cisco UCS Central.
• D. A local policy is applied by using Cisco UCS Central, and a global policy is applied by using Cisco UCS Manager.

Answer: B

NEW QUESTION 4
Which two Cisco technologies can be used to insert services, such as load balancing and firewalls, between VMs? (Choose two.)

• A. vShield
• B. vNIC
• C. vPath
• D. NFV
• E. service graphs

Answer: CE

NEW QUESTION 5
Which two statements accurately describe a Cisco UCS Fabric Interconnect cluster? (Choose two )

• A. Only the active Fabric Interconnect forwards data traffic
• B. The Fabric Interconnect cluster uses a Cisco UCS B-Senes Blade Server chassis to forward data when the L1-L2 links are down
• C. The Fabric Interconnect cluster uses a virtual IP address for management connections
• D. The Fabric Interconnect uses L1-L2 links to forward data when the primary Fabric Interconnect uplinks are down.
• E. primary Fabric Inter connect node conies up after a failure, the node compares the Cisco UCS systemdatabase version to Fabric Interconnect

Answer: CE

NEW QUESTION 6
Which data center virtualization option allows each partition to specify a different set of admisntrators and maintains its all own unique configuration and set of running software process?

• A. VRF
• B. VDC
• C. 100v VEM
• D. vPC

Answer: B

NEW QUESTION 7
You are configuring CIMC management IP pools. You need to avoid the following misconfigurations: Assigning an IP pool that contains only IPv4 addresses as the in-band IPv6 policy
Assigning an IP pool that contains only IPv6 addresses as the in-band IPv4 policy to a server CIMC What does a cisco recommend?

• A. Configure two separate in-band addresses pools that each have only IPv4 or IPv6 addresses
• B. Configure out-of-band management only for IPv6 and accept the default settings for IPv4
• C. Accept the default pool settings for both IPv4 and IPv6
• D. Configure out-of-band management only for IPv4 and accept the default settings for IPv6

Answer: A

NEW QUESTION 8
Which technology does Cisco recommend tor connecting a main data center to a remote data center?

• A. LISP
• B. OTV
• C. FabricPath
• D. vPC

Answer: B

NEW QUESTION 9
Which three statements accurately describe end host mode on cisco UCS Fabric interconnect? (choose Three)

• A. The Fabric interconnect must be rebooted to enable end host mode
• B. Network to server unicast traffic is forward to the server only if the traffic arrived on pinned up link mode
• C. RPF and Deja -Vue checks apply to multicast traffic
• D. The uplink port are placed in rapid PVST+ edge trunk state
• E. Mac address learning occurs only on the server ports
• F. The vtp is enabled on fabric interconnect

Answer: ABE

NEW QUESTION 10
Which two types of connections can be used to build data center interconnects via vPC? (Choose two)

• A. company-owned DWDM
• B. service providers MPLS
• C. service provider IP
• D. service provider DWDM
• E. service provider VPLS

Answer: AD

NEW QUESTION 11
Which technology provides the ability to use all links in a LAN topology by providing an active-active path to the upstream switch?

• A. STP
• B. vPC
• C. PVST+
• D. RSTP

Answer: B

NEW QUESTION 12
Which statement accurately describes VSAN-based QoS when the same flow is present in two class maps that are associated to a policy map?

• A. The highest QoS value is used.
• B. The lowest QoS value is used.
• C. The QoS value of the class map that is attached first takes effect.
• D. The QoS value of the class map that is attached last takes effect.

Answer: C

Explanation: http://www.cisco.com/en/US/products/ps5989/products_configuration_guide_chapter09186a0080663141.html

NEW QUESTION 13
What is the most common design requirement when creating a data center solution?

• A. high availability with disaster recovery
• B. multicore CPU servers
• C. traffic inspection for inbound traffic
• D. virtualization of network resources

Answer: A

NEW QUESTION 14
Which two options are supported on Cisco UCS Fabric Interconnects that use native Fibre Channel connectivity? (Choose two)

• A. iSCSI
• B. NFS
• C. DAS
• D. SAN
• E. iFCP

Answer: CD

NEW QUESTION 15
Spanning Tree Protocol runs at which functional layer of the data center?

• A. core layer
• B. access layer
• C. application layer
• D. network layer

Answer: B

NEW QUESTION 16
Designing data center interconnects requires the understanding of the loop avoidance mechanisms. Drag and drop the loop avoidance mechanisms from the left onto the technologies that utilize them on the right.

Answer:

Explanation:

NEW QUESTION 17
Which use case requires a design that contains multiple VRF instances in a VDC?

• A. Provide VRF-aware services to all Layer 3 interfaces.
• B. Provide a route policy for incoming packets.
• C. Provide routing updates between Layer 3 interfaces
• D. Provide Layer 3 isolation within a VDC

Answer: D