Cisco 300-160 Free Practice Questions

NEW QUESTION 1
In order to provide a specific UCS B-Series blade access to a dedicated uplink on a Fabric interconnect with multiple uplinks connected, which item must to be configured?

• A. vNIC placement policy
• B. IOM Port Group
• C. Static Pinning Policy
• D. LAN Pin Group

Answer: D

NEW QUESTION 2
Why would you configure FCoE to use jumbo frames?

• A. to enable the network to create a no-drop CoS
• B. to provide a credit-based flow control mechanism
• C. to prevent a Fibre Channel frame from being split into two Ethernet frames
• D. to provide prioritized processing that is based on bandwidth allocation and low latency

Answer: B

NEW QUESTION 3
Which protocol must the NICs, CNAs, and underlying physical data center network fabric support to enable lossless iSCSI?

• A. DCBX
• B. FSPF
• C. TRILL
• D. PBB

Answer: A

NEW QUESTION 4
Which solution Enable you to scale up an IPS by load-balancing Traffic to servers or appliances

• A. Cisco ASA with FIRE POWER Services
• B. Cisco AMP
• C. PBR
• D. Cisco ITD

Answer: A

NEW QUESTION 5
You are evaluating Ethernet connectivity options for a data center design. Drag and drop the cabling options from the left onto the correct connectivity designs on the right. Not all options are used.

Answer:

Explanation:

NEW QUESTION 6
Which components share a physical interface in a VDC deployment?

• A. two VDCs for Ethernet traffic
• B. storage VDC for FCoE traffic and a VDC for Ethernet traffic
• C. two storage VDCs for FCoE traffic
• D. interface VLAN and a VDC

Answer: B

NEW QUESTION 7
Which two actions must be performed when you configure Cisco VN-Link in hardware? (Choose two.)

• A. Create a distributed virtual switch in Cisco UCS Manager.
• B. Add an ESX host to the distributed virtual switch in Cisco UCS Manager.
• C. Create a port profile and profile clients in Cisco UCS Manager.
• D. Create a standard switch on an ESXi host and map the network adapters to the switch.
• E. Create a distributed virtual switch under the datacenter folder in VMware vCenter.

Answer: AC

NEW QUESTION 8
Which type of device can be deployed to add multi-homing capability to an OTV implementation?

• A. vPC
• B. IS-IS
• C. Edge
• D. Layer 2 gateway

Answer: C

NEW QUESTION 9
Which two characteristics are associated with the access layer of a Data Center Unified Fabric network? (Choose two)

• A. voice, data, and wireless convergence
• B. no packet manipulation
• C. QoS—policing
• D. routing manipulation and filtering
• E. QoS - classification and queuing

Answer: AE

NEW QUESTION 10
Which technology uses TCP as a block I/O transport?

• A. iSCSI
• B. NFS v4
• C. CIFS
• D. FCoE

Answer: A

NEW QUESTION 11
Which statement regarding network management for the data center is true?

• A. Flexible NetFlow can be used to provide enhanced network anomaly and security detection.
• B. The Network Analysis Module is best deployed in the core for highest visibility.
• C. NetFlow Support is available on most IOS and Nexus products, excluding the Nexus 1000v
• D. NetFlow Data Export is best positioned on the Nexus 5500 at the access or aggregation layer.

Answer: A

NEW QUESTION 12
Refer to the exhibit.

Your client has an existing San network includes two ISL link between two cisco MDS Core switches a client ask you design a feature the load balance the iScSI exchanges coming from the initiator over the two ISL link the design must be capable for over coming failures, which design is required?

• A. ECMP
• B. FSPF supports the load balancing without the need of any additional features
• C. Fabric Path
• D. OXID

Answer: D

NEW QUESTION 13
You plan to configure LISP between two data centers. Which two LISP components most be configured? (Choose two.)

• A. VTEP
• B. the site identifier
• C. a map resolver
• D. a map server
• E. VNI

Answer: CD

Explanation: http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iproute_lisp/configuration/xe-3s/irl-xe-3s-book/irl-cfg-lisp.ht

NEW QUESTION 14
Which two options are valid methods for configuring VLANs on a Cisco UCS cluster? (Choose two.)

• A. globally per Cisco UCS cluster
• B. by using Cisco UCS Fabric Interconnect
• C. by using vPC domain configuration
• D. by using VTP
• E. by using CFS

Answer: AB

Explanation: http://www.cisco.com/c/en/us/support/docs/servers-unified-computing/ucs-2104xp-fabric-extender/110517-vlan

NEW QUESTION 15
Which statement accurately describes Cisco NSF?

• A. To configure NSF for an OSPF routing environment, all Area 0 devices and ABRs must be NSF-aware and must be configured for OSPF graceful restart.
• B. To configure NSF for an IS-IS routing environment, only L1 routers must be NSF-aware and must be configured for IS-IS graceful restart
• C. To configure NSF for a BGP routing environment, all neighboring devices must be NSF-aware and must be configured for BGP graceful restart
• D. To configure NSF for an IS-IS routing environment, only L2 routers must be NSF-aware and must be configured for IS-IS graceful restart

Answer: C

NEW QUESTION 16
How is oversubscription between disk arrays and hosts calculated when you use only line-rate capable line cards?

• A. by dividing the total bandwidth of the disk array ports by the total bandwidth of the Inter-Switch Links
• B. dividing the total bandwidth of the host ports by the total bandwidth of the disk array ports
• C. by dividing the total bandwidth of the host ports by the total bandwidth of the Inter-Switch Links
• D. by dividing the total bandwidth of the disk array ports by the total bandwidth of the host ports

Answer: B

NEW QUESTION 17
Which two terms relate to the capability of a physical NIC to present virtual NICs to the operating system or hypervisor? (Choose two.)

• A. VM-FEX
• B. NPIV
• C. Adapter-FEX
• D. NIV
• E. host vPC
• F. NIC teaming

Answer: CD