Cisco 300-160 Free Practice Questions

NEW QUESTION 1
You are designing a Cisco Fabric Interconnect and UCS blade project for a client that includes two fabric interconnects in high availability and one UCS blade chassis. The Cisco devices will be connected to the client's Fibre Channel storage system.
Which two SAN pool configurations are the minimum requirements for a successful operation? (Choose two.)

• A. Create two WWNN pools per fabric interconnect cluster, one for fabric A and one for fabric B.
• B. Create one WWPN pool per blade chassis.
• C. Create two WWPN pools per fabric interconnect cluster, one for fabric A and one for fabric B.
• D. Create four WWNN pools per fabric interconnect cluster, two for fabric A and two for fabric B.
• E. Create one WWNN pool per blade chassis.

Answer: AC

NEW QUESTION 2
Which two components are contained within a device package that is installed on a cisco APIC?

• A. A device SDK
• B. A device driver
• C. A device Specification
• D. Device script
• E. Device management software

Answer: CD

NEW QUESTION 3
Which two statements accurately describe lossless iSCSl? (Choose two.)

• A. A lossless iSCSI provides additional flow Control by using pause frames at the Ethernet layer along with TCP flow control.
• B. Bandwidth is shared with all of the traffic on the wire.
• C. A lossless iSCSl works only on DCBX-enabled switches.
• D. A lossless iSCSI can be combined with native Fibre Channel fabrics to provide redundancy.
• E. A lossless iSCSl works on all Ethernet switches.

Answer: BD

NEW QUESTION 4
Which two storage technologies can be integrated into the Cisco ACI fabric? (Choose two)

• A. FCIP
• B. DAS
• C. iSCSI
• D. NAS
• E. FC

Answer: CE

NEW QUESTION 5
You are deploying a VM-FEX You have a VM that must be able to attach to a dynamic vNIC. Which action do you take on the VIC adapter?

• A. Dynamically configure the VIC adapter to connect to a vNIC.
• B. Configure a single vNIC only.
• C. Configure two static vNICs.
• D. Add the VIC adapter to a vNIC pool.

Answer: C

NEW QUESTION 6
Which two options are advantages when using NPIV? (Choose two.)

• A. allows a single physical N-Port to have single WWPNs, and therefore single N-Port IDs, associated with it
• B. NPIV-enabled physical N-Port can subsequently issue additional commands to register more WWPNs and receive more N-Port IDs (one for each WWPN).
• C. allows a 'single' physical N-Port to have multiple WWPNs, and therefore multiple N-Port IDs, associated with it
• D. NPV-enabled physical N-Port can subsequently issue additional commands to register more WWPNs and receive more N-Port IDs (one for each WWPN).
• E. allows 'multiple' single physical N-Port to have multiple WWPNs, and therefore multiple N-Port IDs, associated with it
• F. N-Port on the physical host would have only a single WWPN (and N-Port ID).

Answer: BC

NEW QUESTION 7
Drag and drop the feature descriptions from the left onto the correct types of VDCs on the right

Answer:

Explanation:

NEW QUESTION 8
Which data center visualization option allows each partition to specify a different set of administrators and maintains its own unique configuration and set of running software processes?

• A. vPC
• B. 1000vVEM
• C. VRF
• D. VDC

Answer: C

NEW QUESTION 9
You are designing a fabric interconnect solution operating in END host MODE and connected to the upstream Cisco nexus 7000 series Switches for LAN and SAN traffic.
Which statement about the setup is true?

• A. All PLOGLS from the nodes that are connected to the end host fabric interconnect switch must be translated to FDISCs
• B. All PLOGLS from the nodes that are connected to the end host fabric interconnect switch must be translated to Flogls
• C. All PLOGLS from the nodes that are connected to the end host fabric interconnect switch must be translated toPLOGls
• D. FDISCs

Answer: B

NEW QUESTION 10
Which two options are valid for enabling Layer 3 control between Cisco Nexus 1000V Series VSM and VEM? (Choose two)

• A. A virtual Ethernet interfaces
• B. A dedicated control interfaces
• C. An out-of-band management interface
• D. A VMWare vCenter virtual machine virtual interface
• E. A dedicated packet interfaces

Answer: BE

NEW QUESTION 11
Which solution enables you to scale up an IPS by load-balancing traffic to servers or appliances?

• A. Cisco ITD
• B. Cisco AMP
• C. Cisco ASA with FirePOWER Services
• D. PBR

Answer: A

NEW QUESTION 12
Which option must be enabled to allow line-rate forwarding on a Fibre Channel port?

• A. F port
• B. TEport
• C. dedicated mode
• D. shared mode
• E. E port

Answer: C

NEW QUESTION 13
Which two items represent data center virtualization technologies? (Choose two.)

• A. ECMP
• B. GLBP
• C. LUN
• D. VSAN
• E. L2 firewall

Answer: CD

NEW QUESTION 14
Which access layer technology will provide redundancy if there is a link failure on a server link?

• A. VDC
• B. MPLS
• C. vPC
• D. Cisco OTV

Answer: C

NEW QUESTION 15
Refer to the Exhibit:

Which action does Cisco ITD perform when a node fails?

• A. evenly distribute traffic across all the remaining nodes.
• B. transparently adds nodes to the waf-dg
• C. assigns failed node buckets to another active node
• D. removes the failed node from the waf-dg

Answer: C

NEW QUESTION 16
You are designing a data center network using Cisco Nexus 7000 Series switches. Which feature should be configured to control the rate at which packets are allowed to reach the Supervisor?

• A. relaxed process startup
• B. port channel load balancing method
• C. embedded event manager
• D. data plane policing
• E. control plane policing

Answer: E

NEW QUESTION 17
Refer to the exhibit.

Your client has an existing SAN network that includes two ISL links between two Cisco MDS core
switches The client asks you to design a feature that load balances the SCSI exchanges coming from the initiator over the two ISL links The design must be capable of overcoming link failures Which design feature is required?

• A. FabricPath
• B. ECMP
• C. OXID
• D. FSPF supports this load balancing without the need for any additional features

Answer: D