Cisco 300-160 Free Practice Questions

NEW QUESTION 1
For which two items can you change the default settings by using a Fibre Channel adapter policy? (Choose two.)

• A. WWNN pool
• B. queue
• C. MTU
• D. SAN pin group
• E. RSS hash

Answer: BE

NEW QUESTION 2
Refer to the Exhibit.

Link 1 handles most of the traffic. Which action do you take to load balance traffic evenly between the server and the SAN?

• A. Enable src-dst-ox0id load balancing on the MDS switches.
• B. Enable src-dst-id load balancing on the MDS switches.
• C. Change the MDS port changgel configuration to source dest port.
• D. Upgrade the bandwidth for the devices connected to the MDS.

Answer: A

NEW QUESTION 3
In a three-tier SAN topology, which network layer should you connect the SAN initiators to?

• A. storage edge
• B. core
• C. host edge
• D. distribution

Answer: C

NEW QUESTION 4
Refer to the exhibit.

Based on the facts for the given connection, which DCI technology do you use?

• A. OTV
• B. VPLS
• C. EoMPLS
• D. dark fiber

Answer: D

NEW QUESTION 5
Which two options are goals of virtualization in the data center? (Choose two.)

• A. to provide automation for device deployment
• B. to provide resource isolation
• C. to automate the provisioning of VLANs
• D. to provide Integration between devices in a heterogeneous network
• E. to provide flexible resource management

Answer: CD

NEW QUESTION 6
Which two statements about OTV are true? (Choose two.)

• A. OTV forwards and processes spanning-tree BPDUs between sites to ensure a loop-free topology.
• B. All OTV overlay interfaces must use the same join interface.
• C. OTV provides STP isolation because it does not transmit BPDUs across the overlay
• D. OTV utilizes the IS-IS routing protocol to propagate MAC address reachability information
• E. Multicast support in the transport network is a strict requirement to establish OTV adjacencies.
• F. OTV propagates MAC address reachability information via the underlying IS-IS control-plane.

Answer: CD

NEW QUESTION 7
Which statement accurately describe the allocation of IP pool for out of Band management of cisco?

• A. A maximum of eight OOB IP address can be configure to access the CIMC on the server
• B. The management IP address used to access CIMC on a server can be out of band address the inter connect via the fabric uplink port
• C. A maximum of Sixteen OOB IP address can be configure to access the CIMC on the server
• D. The management IP address used to access CIMC on a server can be out of band address the inter connect via the Management port

Answer: B

NEW QUESTION 8
Which option can be used to provide a nonproprietary method of load balancing and redundancy between the access and aggregation layers in the data canter?

• A. vPC
• B. PAgP
• C. LACP
• D. host vPC

Answer: C

NEW QUESTION 9
In which OTV transport mode must an AED router create multiple copies of each control plan packet?

• A. site-to-site
• B. unicast-only
• C. multicast
• D. anycast

Answer: B

Explanation: http://www.cisco.com/c/en/us/products/collateral/routers/asr-1000-series-aggregation-services-routers/guide-c07

NEW QUESTION 10
Which software runs on a device that is connected to a TrustSec-enabled port?

• A. Requester
• B. Authenticator
• C. Supplicant
• D. Authentication Proxy

Answer: C

NEW QUESTION 11
When deploying VMWare ESXi on Cisco UCS B Series Servers, what should the iSCSI boot-from-SAN use in the service profile to provide redundancy?

• A. two VMKs to connect to the storage
• B. two vHBAs to connect to the storage
• C. two vnmics to connect to the storage
• D. two vNICs to connect to the storage

Answer: B

NEW QUESTION 12
Which two characteristics are associated with the core layer of a Data Center Unified Fabric network? (Choose two.)

• A. Layer 2 default gateway redundancy
• B. QoS—policing
• C. no packet manipulation
• D. QoS—classification and queuing
• E. scalable routing protocols like OSPF

Answer: CE

NEW QUESTION 13
The classical aggregation layer design does not provide isolation on the control plane and on the data plane. What is the solution to this problem?

• A. STP
• B. VDC
• C. Cisco ISO ISSU
• D. HSRP

Answer: B

NEW QUESTION 14
What is required when configuring the second fabric interconnect in a cluster configuration?

• A. The IP address of the default gateway must be on the same subnet as the peer fabric interconnect.
• B. The system name of the second fabric interconnect must be different from the system name of the first fabric interconnect.
• C. The IP address of the management port must be in the same subnet as the peer fabric interconnect.
• D. The first and the second fabric interconnects must be able to reach the DNS.

Answer: B

NEW QUESTION 15
Which two options are reasons to use Layer 3 routing to segment a data center instead of Layer 2 switching? (Choose two)

• A. Simply design
• B. Ease of routing protocol configuration
• C. Limit the scope of broadcast flooding
• D. Cost
• E. Limit the scope of spanning Tree Protocol

Answer: CE

NEW QUESTION 16
Refer to exhibit.

What is the result of the configuration

• A. The interface is disable if aggressive UDLD is configure on neighbor interface
• B. UDLD attempt to reestablish the connection to the neighbor by sending packets every second for 8 seconds before disable
• C. The interface operates a point to multipoint interface
• D. UDLD attempt to reestablish the connection to the neighbor once before disabling the port

Answer: D

NEW QUESTION 17
What two options are common switching protocols that are used in the data center? (Choose two.)

• A. MPLS
• B. Frame Relay
• C. FDDI
• D. STP
• E. APPN/APPI

Answer: AD