Cisco 300-165 Free Practice Questions

NEW QUESTION 1
You are implementing a Cisco Fabric Path network. Which statement accurately describes the VNSegment feature?

• A. The VN-Segment feature must be enabled on all leaf switches.
• B. Up to 16,000 VN segments are supported on a leaf switch.
• C. The VN-Segment feature must be enabled on all switches.
• D. The VN-Segment tag is added to VN-Segment edge port

Answer: A

NEW QUESTION 2
Which statement about SNMP support on Cisco Nexus switches is true?

• A. Cisco NX-OS only supports SNMP over IPv4.
• B. Cisco NX-OS supports one instance of the SNMP per VDC.
• C. SNMP is not VRF-aware.
• D. SNMP requires the LAN_ENTERPRISE_SERVICES_PKG license.
• E. Only users belonging to the network operator RBAC role can assign SNMP group

Answer: B

Explanation: Cisco NX-OS supports one instance of the SNMP per virtual device context (VDC). By default, Cisco NX-OS places you in the default VDC. SNMP supports multiple MIB module instances and maps them to logical network entities. SNMP is also VRF aware. You can configure SNMP to use a particular VRF to reach the SNMP notification host receiver. You can also configure SNMP to filter notifications to an SNMP host receiver based on the VRF where the notification occurred.
Reference: http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/5_x/nxos/system_management/configuration/guide/sm_nx_os_cg/sm_9snmp.html

NEW QUESTION 3
Which option must be configured when you implement a vPC?

• A. the CCL link, peer link, and vPC member interfaces
• B. the peer keepalive link, peer link, and vPC member interfaces
• C. the VSL link, peer link, and vPC member interfaces
• D. the VSS link, peer link, and vPC member interfaces

Answer: B

NEW QUESTION 4
Which command should you ran to distribute NTP configuration changes by using Cisco Fabric Services?

• A. ntp distribute
• B. ntp server 1.2.3.4
• C. ntp commit
• D. ntp authenticate

Answer: A

NEW QUESTION 5
DRAG DROP
Drag the description on the left to the most appropriate Nexus product on the right.

Answer:

Explanation:

NEW QUESTION 6
Which feature does a vFC interface support?

• A. port tracking
• B. F Port mode
• C. SAN port channels
• D. buffer-to-buffer credits

Answer: B

NEW QUESTION 7
Which four options are capabilities of the Cisco Nexus 5000 and 5500 Series Switch? (Choose four.)

• A. line rate
• B. managed by a parent switch
• C. lossless 10 Gigabit Ethernet
• D. lossless 100 Gigabit Ethernet
• E. low latency
• F. extremely low latency
• G. hosts a virtual supervisor module

Answer: ACEG

NEW QUESTION 8
What is the grace period in a graceful restart situation?

• A. how long the supervisor waits for NSF replies
• B. how often graceful restart messages are sent after a switchover
• C. how long NSF-aware neighbors should wait after a graceful restart has started before tearing down adjacencies
• D. how long the NSF-capable switches should wait after detecting that a graceful restart has started, before verifying that adjacencies are still valid

Answer: C

Explanation: Graceful restart (GR) refers to the capability of the control plane to delay advertising the absence of a peer (going through control-plane switchover) for a "grace period," and thus help minimize disruption during that time (assuming the standby control plane comes up). GR is based on extensions per routing protocol, which are interoperable across vendors. The downside of the grace period is huge when the peer completely fails and never comes up, because that slows down the overall network convergence, which brings us to the final concept: nonstop routing (NSR).
NSR is an internal (vendor-specific) mechanism to extend the awareness of routing to the standby routing plane so that in case of failover, the newly active routing plane can take charge of the already established sessions.
Reference: http://www.ciscopress.com/articles/article.asp?p=1395746&seqNum=2

NEW QUESTION 9
You are configuring OTV between two data centers. On which interfaces should the site VLAN allowed?

• A. the interfaces that connect to the aggregation switches
• B. the OTV overlay interfaces
• C. the interfaces that connect to the join interfaces
• D. the mgmt0 interfaces

Answer: A

NEW QUESTION 10
You have two roles that are associated to the same user. Which statement is true about how the roles are evaluated to form the permissions of the user?

• A. A combination of all commands that are permitted by the roles can be executed
• B. A role that denies a command takes priority over a role that permits a command
• C. An implicit permit is applied to both roles at the end of each rule set
• D. Only the commands that are permitted by both roles can be executed

Answer: A

Explanation: Reference:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/4_1/nxos/security/configuration/guide/sec_nx-os-cfg/sec_rbac.html

NEW QUESTION 11
Which configuration is specific to Cisco TelePresence System seed devices?

• A. radius server radius-server-name
• B. aaa session-id common
• C. radius-server vsa send authentication
• D. aaa new-model

Answer: A

NEW QUESTION 12
What is the default Fibre Channel interface type for an FCIP virtual interface?

• A. TF
• B. E
• C. TE
• D. F

Answer: B

NEW QUESTION 13
You have a Cisco Nexus 5000 Series switch. Port security is configured to use sticky learning. Where are the secured MAC addresses stored?

• A. the running configuration
• B. the startup configuration
• C. NVRAM
• D. RAM

Answer: C

NEW QUESTION 14
You have a Cisco Fabric Path network, you must extend the network to support more than 16 million segment, what should you do?

• A. Enable the interface-vlan feature and configure the VLAN IDs
• B. Enable the nv overlay feature and configure the segment IDs
• C. Enable the vn-segment-vlan-based feature and configure segment IDs
• D. Enable the FabricPath feature and configure the VLAN IDs.

Answer: C

Explanation: https://www.cisco.com/c/en/us/products/collateral/switches/nexus-7000-series-switches/whitepaper- c11-737022.html

NEW QUESTION 15
You create a checkpoint on a Cisco Nexus 7700 Series switch. You plan to roll back the running configuration by using the checkpoint. You must ensure that changes are made only if the entire rollback can be applied successfully. Which rollback option should you use?

• A. atomic
• B. stop-at-first-failure
• C. best-effort
• D. verbose

Answer: A

NEW QUESTION 16
Refer to the exhibit.

Which statement about the result of the configuration is true?

• A. The virtual IPv6 address is derived from the physical IPv6 address of the interface
• B. Hello packets are sent by using an address of 224.0.0.102.
• C. Hello packets are sent by using an address of FF02 : 66
• D. The virtual MAC address is derived from the physical IPv6 address of the interfac

Answer: D