Cisco 300-175 Free Practice Questions

NEW QUESTION 1
ACustomer wants to know more about managing standalone Cisco UCS C-Series systems through the Cisco lntergrated Management Controller. The customer asks which management protocols are supported. Which three protocols must you include in your respone? (Choose three)

• A. SNMP v3
• B. SNMP v2
• C. SMASH CLP
• D. SoL
• E. Virtual KVM
• F. IPMI v2

Answer: ABF

Explanation: The IMC supports industry-standard protocols, including Redfish version 1.01, Intelligent Platform Monitoring Interface Version 2 (IPMI v2), and Simple Network Management Protocol versions 2 and 3 (SNMP v2 and v3). It also provides an open Extensible Markup Language (XML) API and a
command-line interface (CLI). Reference:
https://www.cisco.com/c/dam/en/us/products/collateral/servers-unified-computing/ucs-c-series-rack-serve

NEW QUESTION 2
Which two policies can specify that a port channel be configured between the fabric extender and fabric interconnect? (Choose two.)

• A. Chassis or fabric extender discovery policy
• B. Rack server discovery policy
• C. Rack management connection policy
• D. Server inheritance policies
• E. Autoconfig policies
• F. Chassis connectivity policy

Answer: AF

Explanation: Reference:
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/20/b_UCSM_GUI_Configura

NEW QUESTION 3
Which slot(s) contain DIMMs in a 1DPC configuration on Cisco UCS blade server?

• A. 1 and 2 only.
• B. 1
• C. 2

Answer: C

Explanation: Reference:
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/hw/bladeservers/install/B200.html

NEW QUESTION 4
An administrator is testing the Cisco Nexus 1000v switch on top of a Cisco UCS Blade. They realize that the test VM traffic is not marked correctly after it leaves the Cisco UCS B-series blade. What is the reason for seeing this behavior?

• A. The Cisco UCS does not support QoS marking
• B. The Cisco UCS QoS policy applied to the blade has the host control set to "none."
• C. The Cisco Nexus 1000V Series Switches do not support QoS marking.
• D. The Cisco Nexus 1000V Series Switch QoS marking has not been enabled with "feature gos."

Answer: B

NEW QUESTION 5
To boot from SAN, you must perform which two configurations on a Cisco UCS system? (Choose two.)

• A. Enter the boot LUN and the nWWNs.
• B. Put the boot VSANin a dedicated boot service profile template.
• C. Create a LUN, and allow the server WWPN to have access to the LUN.
• D. Put the server WWPN and the storage array WWPN in the same zone.
• E. Create a dedicated boot VSAN.

Answer: CD

Explanation: Reference:
http://jeffsaidso.com/2010/11/boot-from-san-101-with-cisco-ucs

NEW QUESTION 6
View the Exhibit.

Refer to the exhibit. You need to configure a Fibre Channel device alias named TEST for a device that is attached to port fc 1/9 of a Cisco Nexus Series switch in a Cisco UCS system.
Which command set should you use?

• A. SITE-A-MDS-Fabric-A# configure terminalSITE-A-MDS-Fabric-A (config)# device-alias databaseSITE-A-MDS-Fabric-A (config-device-alias-db)# device-alias name TEST pwwn 50:00:14:42:d0:0c:f5:20SITE-A-MDS-Fabric-A (config-device-alias-db)# exit
• B. SITE-A-MDS-Fabric-A# configure terminalSITE-A-MDS-Fabric-A (config)# device-alias databaseSITE-A-MDS-Fabric-A(config-device-alias-db)# device-alias name TEST pwwn50:00:14:40:47:b0:0c:f5SITE-A-MDS-Fabric-A (config-device-alias-db)# device-alias commit
• C. SITE-A-MDS-Fabric-A# configure terminalSITE-A-MDS-Fabric-A (config)# device-alias databaseSITE-A-MDS-Fabric-A (config-device-alias-db)# device-alias name TEST pwwn 50:00:14:42:d0:0c:f5:20SITE-A-MDS-Fabric-A (config-device-alias-db)# device-alias commit
• D. SITE-A-MDS-Fabric-A# device-alias databaseSITE-A-MDS-Fabric-A (device-alias-db)# device-alias name TEST pwwn 50:00:14:40:47:b0:0c:f5SITE-A-MDS-Fabric-A (config-device-alias-db)#device-alias commit

Answer: B

Explanation: Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/4_1/configuration/guides/cli_4_1/clibo https://community.emc.com/thread/170991?start=0&tstart=0
We need to zone the PWWN (port WWN) of fc1/9, not the NWWN (node WWN) of fc1/9

NEW QUESTION 7
Which tool provides automated support capability that provides continuous monitoring, proactive diagnostics, alerts, and remediation recommendations?

• A. Cisco Smart Call Home
• B. snmp
• C. Cisco Director
• D. Cisco Threat Gateway

Answer: A

NEW QUESTION 8
You have been tasked with performing a backup through Cisco UCS Manager that can be used to restore the system during disaster recovery. Which type of backup must you perform?

• A. System configuration
• B. Full state
• C. All configuration
• D. Logical configuration

Answer: B

Explanation: Reference:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/AdminManagem

NEW QUESTION 9
Which policy is used to specify how Cisco UCS Manager should proceed for configuration changes that will have a service impact?

• A. host firmware policy
• B. maintenance policy
• C. local disk policy
• D. BIOS policy

Answer: B

NEW QUESTION 10
Which option describes the difference between "high-performance" and "none" on a VM-FEX port profile?

• A. None is software assisted, and high-performance is software and hardware assisted.
• B. None indicates that VM-FEX is not used on this interface, and high-performance indicates that is used.
• C. None is used for management profiles, and high-performance is used for mission-critical data profiles.
• D. None assumes default scheduling settings for the port profile, and high-performance gives the ports priority in scheduling.

Answer: A

NEW QUESTION 11
Which option is a prerequisite when implementing iSCSI boot?

• A. The OS must be iBFT compatible.
• B. The boot parameters must be configured in the Global boot policy.
• C. There are no licensing requirements for the storage array.
• D. Each iSCSI initiator must be on the same IP subnet.

Answer: A

NEW QUESTION 12
Refer to the exhibit.

You are configuring a Cisco UCS Fabric Interconnect. You associate a blade server to a service profile that has the Testing boot policy. Which statement describes the result of the configuration?

• A. The iSCSI boot was created for the LAN boot policy.
• B. The blade server fails to boot due to a missing configuration line of set order 0.
• C. The blade server first tries to boot by using vHBA3 across the SAN network.
• D. The blade server first tries to boot from the local storage, and if this fails, it boots from vHBA3.

Answer: C

Explanation: Reference:
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/cli/config/guide/2-2/b_UCSM_CLI_Configura

NEW QUESTION 13
Which consideration must be made while utilizing the UEFI boot mode?

• A. Legacy boot modes cannot be used on the same server.
• B. This mode applies only to models before the M3.
• C. The service profile cannot be disassociated without decommissioning the blade.
• D. This mode replaces the UEFI shell typically available as a boot fallback.

Answer: A

NEW QUESTION 14
You are configuring integration between the Cisco UCS Manager and the VMware vCenter Server Appliance. Which three actions must you perform from the Cisco Configure VMware Integration Wizard? (Choose three.)

• A. Define the virtual machine port profile in the Cisco UCS Manager for virtual machine traffic.
• B. Install and register the Cisco UCS Manager extension as a plug-in in the VMware vCenter.
• C. Install and register the VMware VM Console plug-in in the Cisco UCS Manager.
• D. Apply a port profile (port group) to the virtual machines on the VMware vCenter server.
• E. Apply the Firewall Services Module UCS service profile to Cisco UCS B-Series Blade Server.
• F. Apply a fabric profile to both Cisco Fabric Interconnect uplink ports.

Answer: ABD

Explanation: Reference:
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/vm_fex/vmware/gui/config_guide/2-2/b_GUI_

NEW QUESTION 15
Before upgrading a Cisco UCS cluster.you need to verify the high-availability statue and roles of the cluster. In which scenario can you successfully perform the upgrade'?

• A. When you check the Cisco UCS Manager GUI, the Ready field value is Ready and the State field value is O
• B. When you check the Cisco UCS Manager CLI, the Primary and Secondary interconnect state are both ON and the cluster state is HA WAITING.
• C. When you check the Cisco UCS Manager GUI, the Ready field value is Yes and the State field value isU
• D. When you check the Cisco UCS Manager CLI, the Primary and Secondary interconnect state are both UP and the cluster state is HA READY.
• E. When you check the Cisco UCS Manager GUI, the Ready field value is Ready and the State field value is Activ
• F. When you check the Cisco UCS Manager CLI, the Primary and Secondary interconnect state are both READY and the cluster state is HA WAITING.
• G. When you check the Cisco UCS Manager GUI, the Ready field value is Ready and the State field value is U
• H. When you check the Cisco UCS Manager CLI, the Primary and Secondary interconnect state are both UP and the cluster state is HA UP.

Answer: D

Explanation: When you check the Cisco UCS Manager GUI, the Ready field value is Yes and the State field value is Up.
When you check the Cisco UCS Manager CLI, the Primary and Secondary interconnect state are both UP and the cluster state is HA READY.
Reference:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/firmware-mgmt/gui/2-2/ b_GUI_Firmware_Management_22/b_GUI_Firmware_Management_22_chapter_011.pdf
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/CLI-User-Guides/FirmwareMgmt/3

NEW QUESTION 16
Which two statements are true concerning authorization when using RBAC in a Cisco Unified Computing
System? (Choose two.)

• A. A locale without any organizations, allows unrestricted access to system resources in all organizations
• B. The logical resources, pools and policies are groups into roles
• C. A role contains a set of privileges which define the operations that a user is allowed to take
• D. When a user has both local and remote accounts, the roles defined in the remote user account override those in the local user account
• E. Customized roles can be configured on and downloaded from remote AAA servers

Answer: AC

NEW QUESTION 17
Which UCS components firmware are contained in the UCS Infrastructure software bundle?

• A. UCS BIOS
• B. UCS Fabric Interconnects
• C. UCS Adapters
• D. UCS Manager
• E. IO Module
• F. Cisco IMC

Answer: BDE

NEW QUESTION 18
Which authentication provider requires a custom attribute?

• A. TACACS+
• B. RADIUS
• C. LDAP
• D. local authentication

Answer: A

Explanation: Reference:
http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/gui/config/guide/141/UCSM_GUI_Configuration_Guide_141_chapter7.html

NEW QUESTION 19
When implementing iSCSI boot, which prerequisite is true?

• A. Each iSCSI initiator must be on the same IP subnet
• B. The OS must be iBFT compatible
• C. The boot parameters must be configured in the Global boot policy
• D. There are no licensing requirements for the storage array

Answer: B