Cisco 300-175 Free Practice Questions

NEW QUESTION 1

Answer:

Explanation:

NEW QUESTION 2
Refer to the exhibit.

Which action do you take to complete the iSCSI boot implementation?

• A. Add a DNS server to resolve the IQN name.
• B. Create an IP pool.
• C. Add a default gateway.
• D. Add in iSCSI target.

Answer: D

NEW QUESTION 3
Which options is the only supported link aggregation protocol on Cisco UCS Manager?

• A. Multipath
• B. PagP
• C. FLOGI
• D. LACP
• E. FCOE

Answer: D

Explanation: UCS port channel configuration is statically set to Link Aggregation Control Protocol (LACP) mode active. This configuration cannot be modified; therefore, all upstream port-channel configurations must adhere to
LACP mode active as well. Alternatively, you can configure the upstream switchports for LACP mode passive.
Reference:
https://www.cisco.com/c/en/us/support/docs/servers-unified-computing/ucs-manager/116095-configure-ucsupstr

NEW QUESTION 4
Which two features in Cisco UCS Manager can be configured from LAN Uplinks Manager? (Choose two.)

• A. vNIC templates
• B. LAN Pin Groups
• C. VLAN groups
• D. adapter policies
• E. link profiles

Answer: BC

NEW QUESTION 5
You attempt to perform an ESXi update on a Cisco UCS C250 server, but the update does not recognize the NICs. You must perform the update as quickly as possible. Which step must you do first?

• A. Check the UCS compatibility matrix and replace the NIC with a supported one.
• B. Reconfigure the NIC ID on the LOM.
• C. Update the LOM firmware by using the Cisco Host Update Utility.
• D. Update the NIC firmware by using the Cisco Host Update Utility.

Answer: C

Explanation: https://supportforums.cisco.com/t5/unified-computing-system/ucs240m3-network-interfaces-missing-on-esxi-5-
http://terenceluk.blogspot.com/2011/08/updating-firmware-for-cisco-ucs-c.html

NEW QUESTION 6
You have a Cisco UCS C-Series Server. What can you use to log the blade server statistics?

• A. the Cisco Integrated Management Controller log
• B. RADIUS
• C. LDAP
• D. the XML API

Answer: A

Explanation: Reference:
http://www.cisco.com/c/en/us/products/collateral/servers-unified-computing/ucs-cseries-rack-servers/datasheet-c

NEW QUESTION 7
Cisco UCS Manager has deleted the VM object from its database, yet it still exists in vCenter. For which two reasons is the object removed from the Cisco UCS Manager database? (Choose two.)

• A. The VM last passed traffic more than 5 minutes ago.
• B. The VM is misconfigured.
• C. The VM has been offline for more than 15 minutes.
• D. vCenter is offline.
• E. The VN link policy has been set for auto-deletion during a vMotion event.
• F. The link between the fabric interconnect and IOM is offline.
• G. The object was deleted in the Cisco UCS Manager, which also deletes it from vCenter.
• H. The VM traffic is being sent to a SPAN

Answer: CF

NEW QUESTION 8
In order to manually boot from the FlexFlash SD card, which boot option must be in the boot policy used in the service profile?

• A. FlexFlash state
• B. remote virtual drive
• C. remote boot
• D. SD card

Answer: D

Explanation: Topic 2, Exam Set 1

NEW QUESTION 9
What is the purpose of the maximum ports that are filed in the port profile?

• A. determines the maximum number of uplinks that VMs can use
• B. determines the maximum number of VMs that can use the DVS
• C. determines the maximum number of DVSs that can use the port profile
• D. determines the maximum number of dynamic vNICS on the DVS

Answer: D

NEW QUESTION 10
After staging a VEM file on a VMware ESXi 5.0 host in the /tmp directory, what is the correct command syntax to install the VEM?

• A. esxcli software vib install –d /tmp/VEM500-20110825132140-BG-release.zip-maintenance-mode
• B. esxcli software vib install –v /tmp/VEM500-20110825132140-BG-release.zip-maintenance-mode
• C. esxupdate software vib install –d /tmp/VEM500-20110825132140-BG-release.zip-maintenance-mode
• D. esxupdate software vib install –v /tmp/VEM500-20110825132140-BG-release.vib-maintenance-mode

Answer: A

NEW QUESTION 11
Which VMware ESXi 5.0 CLI command will validate PassThru interfaces when they are available?

• A. vem status -v
• B. vempassthru-v
• C. vemintf -v
• D. vemifconfig -v
• E. vempts -v

Answer: A

NEW QUESTION 12
Which four physical connections on a fabric interconnect are needed to perform the initial system setup for a cluster configuration? (Choose four.)

• A. Ethernet uplink ports connected to upstream switch
• B. console port connected to a computer terminal or console server.
• C. Layer 1 ports on both fabric interconnects connected to each other
• D. Layer 1 port of the first fabric interconnect connected to Layer 2 port of the second fabric interconnect
• E. Layer 2 ports on both fabric interconnects connected to each other
• F. Fibre Channel uplink ports connected to upstream fabric switch
• G. management Ethernet port (mgmt0) connected to external switch or router
• H. port channel to each fabric interconnect

Answer: BCEG

NEW QUESTION 13
Which statement about RBAC locates in a Cisco UCS system is true?

• A. Locales are user environment settings such as currency, language, time, and date format
• B. Locales are groups of organizations that are tied to users for authorization purposes
• C. AAA users are called locales in a local database for AAA
• D. Locales are user settings in local and external user databases for AAA

Answer: B

NEW QUESTION 14
Refer to the exhibit.

Which port is used for communication between the server and the Cisco Integrated management Controller?

• A. port on the adapter card
• B. management Ethernet port
• C. LAN on the motherboard port
• D. fabric uplink port

Answer: B

Explanation: Reference:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/sw/gui/config/guide/1-2-1/b_Cisco_UCS_C-Se

NEW QUESTION 15
Which boot method would you use to boot the OS of a server by using a storage device located on an IP network?

• A. CIMC secure boot
• B. local disk boot
• C. SAN boot
• D. iSCSI boot

Answer: D

Explanation: Reference:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Server-Mgmt/3-1

NEW QUESTION 16
Which two statements about the service profile configuration options in the Cisco UCS Manager GUI are true? (Choose two.)

• A. It can be generated automatically from the service profile template.
• B. It can be derived from the chassis discovery policy.
• C. It can be derived from the initial template or the updating template.
• D. It can be configured by cloning a virtual machine profile.
• E. It can be configured by using the chassis connectivity policy.

Answer: AC

Explanation: Reference: https://www.cisco.com/en/US/docs/unified_computing/ucs/sw/gui/config/guide/141/UCSM_GUI_Configuration

NEW QUESTION 17
This question concerns provisioning a workload on a Cisco UCS System. Drag the options on the left to the right side in the correct order.

Answer:

Explanation:

NEW QUESTION 18
You need to upgrade the firmware on a Cisco UCS B-Series Blade Server system. Drag and drop the firmware packages on the left to the appropriate software bundle types on the right.

Answer:

Explanation: Cisco UCS Infrastructure Software Bundle
I/O module firmware
Kernel and system firmware for Fabric Interconnects
Cisco UCS Manager firmware
Cisco UCS B-series Blade Server Software Bundle
Board controller firmware
BIOS firmware CIMC firmware Third-party firmware

NEW QUESTION 19
You need to configure a Fibre Channel device alias named TEST for a device that is attached to port fc1./9 of a Cisco Nexus Series switch in a Cisco UCS system. Based on the output below, which command set should you use?

• A. SITE-A-MDS-Fabric-A# device-alias databaseSITE-A-MDS-Fabric-A (device-alias-db)# device-alias name TEST pwwn 50:00:14:40:47:b0:0c:f5SITE-A-MDS-Fabric-A (config-device-alias-db)# device-alias commit
• B. SITE-A-MDS-Fabric-A# configure terminalSITE-A-MDS-Fabric-A (config)# device-alias databaseSITE-A-MDS-Fabric-A (config-device-alias-db)# device-alias name TEST pwwn 50:00:14:42:d0:0c:f5:20SITE-A-MDS-Fabric-A (config-device-alias-db)# device-alias commit
• C. SITE-A-MDS-Fabric-A# configure terminalSITE-A-MDS-Fabric-A (config)# device-alias databaseSITE-A-MDS-Fabric-A(config-device-alias-db)# device-alias name TEST pwwn 50:00:14:40:47:b0:0c:f5SITE-A-MDS-Fabric-A (config-device-alias-db)# device-alias commit
• D. SITE-A-MDS-Fabric-A# configure terminalSITE-A-MDS-Fabric-A (config)# device-alias databaseSITE-A-MDS-Fabric-A (config-device-alias-db)# device-alias name TEST pwwn 50:00:14:42:d0:0c:f5:20SITE-A-MDS-Fabric-A (config-device-alias-db)# exit

Answer: A