Cisco 300-175 Free Practice Questions

NEW QUESTION 1
Scenario
In this scenario, you will refer to screenshots about Cisco UCS B-Series servers and UCS Manager. Instructions
To access the multiple-choice questions, click on the numbered boxes on the left of the top panel. There are four multiple-choice questions with this task. Be sure to answer all four questions before selecting the Next button.



Refer to the screenshot in Exhibit 2. Which item is true about Boot Order in Cisco UCS –Series Rack Servers?

• A. Boot order configured in the BIOS will not be reflected in the Cisco IMC GUI.
• B. Boot options should not be disabled in the BIOS.
• C. The Boot Order set in the BIOS does not override the Cisco IMC.
• D. Boot Order should only be configured in the Cisco IMC GUI.

Answer: A

NEW QUESTION 2
In Cisco UCS Manager 2.2 or later, in order to manually boot from the FlexFlash SD card, which boot option must be in the boot policy used in the service profile?

• A. remote virtual drive
• B. FlexFlash state
• C. SD card
• D. remote boot

Answer: B

NEW QUESTION 3

Answer:

Explanation: to allow local management of the cluster to be configured.

NEW QUESTION 4
Which consideration must be made while performing backup operations within the Cisco UCS Manager?

• A. Rerunning an existing backup operation overwrites the existing backup file.
• B. Scheduled backups are not available.
• C. A user can perform incremental backups of a system configuration.
• D. Each backup destination can have multiple backup operations.

Answer: A

NEW QUESTION 5
Refer to the exhibit

Fabric Interconnect B is in a primary state. Which IP addresses can you use to connect to Fabric Interconnect B?

• A. 10.0.0.198, 10.0.0.199 and 10.0.0.200
• B. 10.0.0.199 only
• C. 10.0.0.199 and 10.0.0.200 only
• D. 10.0.0.200 only

Answer: C

NEW QUESTION 6
Which statement about Adapter FEX is true?

• A. Adapter FEX extends the fabric into the server.
• B. Adapter FEX extends the fabric into the hypervisor.
• C. Adapter FEX extends the fabric down to the FEX port.
• D. Adapter FEX extends the fabric down to the VM.

Answer: A

NEW QUESTION 7
When upgrading a standalone Cisco UCS C-Series server, which method is correct?

• A. direct upgrade on all components
• B. Cisco Hardware Upgrade Utility
• C. Cisco Host Upgrade Utility
• D. Cisco Server Upgrade Utility

Answer: C

NEW QUESTION 8
Which policy would you change to form a port channel between a Cisco UCS 6248 and a Cisco UCS 2208?

• A. link aggregation policy
• B. chassis discovery policy
• C. IOM connection policy
• D. link discovery policy

Answer: B

NEW QUESTION 9
Refer to the exhibit.

Based on the output, which statement about the fabric interconnect is true?

• A. The fabric interconnect floods multicast traffic in VLAN 100.
• B. 10 groups in the fabric interconnect have been configured for VLAN 100 access.
• C. After adding VLAN 100, no other changes were made.
• D. IGMP snooping was enabled by the admin for VLAN 100.

Answer: D

NEW QUESTION 10
Which maintenance action releases the assigned chassis ID for future use?

• A. Acknowledge chassis
• B. Reset CMOS
• C. Decommission chassis
• D. Remove chassis

Answer: C

Explanation: Reference: http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/22/b_UCSM_GUI_Configura 86ACDE9D13C222A452

NEW QUESTION 11
Which two features in Cisco UCS Manager are required to configure Uplink Ethernet ports? (Choose two.)

• A. vNIC templates
• B. LAN Pin Groups
• C. VLAN groups
• D. adapter policies
• E. link profiles

Answer: AB

Explanation: Reference:
https://www.cisco.com/c/en/us/support/docs/servers-unified-computing/ucs-6120xp-20-port-fabricinterconnect/1
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/2-2/ b_UCSM_GUI_Configuration_Guide_2_2/using_the_lan_uplinks_manager.html

NEW QUESTION 12

Answer:

Explanation:

NEW QUESTION 13

Answer:

Explanation:

NEW QUESTION 14
What is a true statement concerning automatic Fibre Channel pinning on a Cisco Unified Computing System 62XX Fabric Interconnect?

• A. By default, uplink Fibre Channel interfaces are configured for VSAN trunking.
• B. Using NPV, each downstream server will be pinned to an uplink port that is based on a PIN group.
• C. TheFibre Channel pinning process is implemented differently than end-host MAC address pinning.
• D. With VSAN trunking, the automatic pinning of server traffic to Fibre Channel uplink ports will be based on the server WWN.

Answer: D

NEW QUESTION 15
Which three tasks can a user with the ext-lan-policy privileges perform? (Choose three.)

• A. Configure management interfaces on the fabric interconnect.
• B. Configure Ethernet pin groups.
• C. Configure management interfaces monitoring policy.
• D. Create/modify/delete vNIC/vHBA placement policies.
• E. Configure DNS providers and DNS domain.
• F. Specify the allowed range for virtual MAC addresses.
• G. Configure fabric interconnect system name.
• H. This privilege has full access to all operations.

Answer: BDF

NEW QUESTION 16
Which statement is true regarding backup operations in Cisco UCS Manager?

• A. A user can perform incremental backups of a system configuration.
• B. Passwords and other sensitive information are encrypted in full state backups.
• C. Scheduled backups are not available.
• D. Each backup destination can have multiple backup operations.

Answer: B

NEW QUESTION 17
Refer to the exhibit.

Which two statements about the fabric interconnect are true? (Choose two.)

• A. The fabric interconnect forwards all broadcast packets on VLAN 311 out of each interface listed in the Membership.
• B. The fabric interconnect forwards broadcasts on VLAN 311 only when they are received on Po21.
• C. Without any changes to the switch, eth 1/32 could become the designated receiver for VLAN 311.
• D. All multicast traffic from a blade on VLAN 311 goes out of Po21.
• E. IGMP join packets from blades on VLAN 311 goes out Po21.

Answer: BE

NEW QUESTION 18
Which three options are needed when configuring local zoning on the Cisco UCS Fabric Interconnects? (Choose three.)

• A. The fabric interconnects are operating in FC switching mode.
• B. The fabric interconnects are operating in FC end-host mode.
• C. SAN connectivity policy
• D. storage connection policy
• E. FC target endpoints
• F. iSCSI target endpoints

Answer: ADE

NEW QUESTION 19
Which NIC redundancy modes allow the LOMs to be discovered by the operating system or hypervisor?

• A. Dedicated mode
• B. Active/Active
• C. Active/Standby
• D. Cisco Card Mode

Answer: A