Introducing The New!
Surepassexam Collection
Get Unlimited Access to all
Surepassexam's PREMIUM files
Q1. In the command 'aaa authentication default group tacacs local', how is the word 'default' defined?
A. Command set
B. Group name
C. Method list
D. Login type
Answer: C
Q2. In an 802.1X authorization process, a network access device provides which three functions? (Choose three.)
A. Filters traffic prior to authentication
B. Passes credentials to authentication server
C. Enforces policy provided by authentication server
D. Hosts a central web authentication page
E. Confirms supplicant protocol compliance
F. Validates authentication credentials
Answer: A,B,C
Q3. A properly configured Cisco ISE Policy Service node is not receiving any profile data from a Cisco switch that runs Device Sensor.
Which option is the most likely reason for the failure?
A. Syslog is configured for the Policy Administration Node.
B. RADIUS Accounting is disabled.
C. The SNMP community strings are mismatched.
D. RADIUS Authentication is misconfigured.
E. The connected endpoints support CDP but not DHCP.
Answer: B
Q4. What are the initial steps must you perform to add the ISE to the WLC?
A. 1. With a Web browser, establish an HTTP connection to the WLC pod.
2. Navigate to Administration > Authentication > New.
3. Enter server values to begin the configuration.
B. 1. With a Web browser, establish an FTP connection to the WLC pod.
2. Navigate to Security > Administration > New.
3. Add additional security features for FTP authentication.
C. 1. With a Web browser, establish an HTTP connection to the WLC pod.
2. Navigate to Authentication > New.
3. Enter ACLs and Authentication methods to begin the configuration.
D. 1. With a Web browser connect, establish an HTTPS connection to the WLC pod.
2. Navigate to Security > Authentication > New.
3. Enter server values to begin the configuration.
Answer: D
Q5. Which three features should be enabled as best practices for MAB? (Choose three.)
A. MD5
B. IP source guard
C. DHCP snooping
D. storm control E. DAI
F. URPF
Answer: B,C,E
Q6. Which two Cisco ISE administration options are available in the Default Posture Status setting? (Choose two.)
A. Unknown
B. Compliant
C. FailOpen
D. FailClose
E. Noncompliant
Answer: B,E
Q7. You discover that the Cisco ISE is failing to connect to the Active Directory server. Which option is a possible cause of the problem?
A. NTP server time synchronization is configured incorrectly.
B. There is a certificate mismatch between Cisco ISE and Active Directory.
C. NAT statements required for Active Directory are configured incorrectly.
D. The RADIUS authentication ports are being blocked by the firewall.
Answer: A
Q8. Which three personas can a Cisco ISE assume in a deployment? (Choose three.)
A. connection
B. authentication
C. administration
D. testing
E. policy service
F. monitoring
Answer: C,E,F
Q9. What three changes require restarting the application service on an ISE node?.(Choose three.)
A. Registering a node.
B. Changing the primary node to standalone.
C. Promoting the administration node.
D. Installing the root CA certificate.
E. Changing the guest portal default port settings.
F. Adding a network access device.
Answer: A,B,C
Q10. What are two client-side requirements of the NAC Agent and NAC Web Agent installation? (Choose two.)
A. Administrator workstation rights
B. Active Directory Domain membership
C. Allowing of web browser activex installation
D. WSUS service running
Answer: A,C
Q11. Under which circumstance would an inline posture node be deployed?
A. When the NAD does not support CoA
B. When the NAD cannot support the number of connected endpoints
C. When a PSN is overloaded
D. To provide redundancy for a PSN
Answer: A
Q12. Which model does Cisco support in a RADIUS change of authorization implementation?
A. push
B. pull
C. policy
D. security
Answer: A
Q13. Which type of remediation does Windows Server Update Services provide?
A. automatic remediation
B. administrator-initiated remediation
C. redirect remediation
D. central Web auth remediation
Answer: A
Q14. In this simulation, you are task to examine the various authentication events using the ISE GUI. For example, you should see events like Authentication succeeded. Authentication failed and etc...
Which three statements are correct regarding the events with the 20 repeat count that occurred at 2014-05-07 00:22:48.748? (Choose three.)
A. The device was successfully authenticated using MAB.
B. The device matched the Machine_Corp authorization policy.
C. The Print Servers authorization profile were applied.
D. The device was profiled as a Linksys-PrintServer.
E. The device MAC address is 00:14:BF:70:B5:FB.
F. The device is connected to the Gi0/1 switch port and the switch IP address is 10.10.2.2.
Answer: A,D,E
Explanation:
Event Details:
Screen Shot 2015-06-23 at 5.32.43 PM …continued:
Screen Shot 2015-06-23 at 5.33.24 PM
Q15. When you select Centralized Web Auth in the ISE Authorization Profile, which two components host the web authentication portal? (Choose two.)
A. ISE
B. the WLC
C. the access point
D. the switch
E. the endpoints
Answer: B,D
Q16. Which two options are EAP methods supported by Cisco ISE? (Choose two.)
A. EAP-FAST
B. EAP-TLS
C. EAP-MS-CHAPv2
D. EAP-GTC
Answer: A,B
Q17. With which two appliance-based products can Cisco Prime Infrastructure integrate to perform centralized management? (Choose two.)
A. Cisco Managed Services Engine
B. Cisco Email Security Appliance
C. Cisco Wireless Location Appliance
D. Cisco Content Security Appliance
E. Cisco ISE
Answer: A,E