Introducing The New!
Surepassexam Collection
Get Unlimited Access to all
Surepassexam's PREMIUM files
Q1. Which three statements about firewall modes are correct? (Choose three.)
A. A firewall in routed mode has one IP address.
B. A firewall in transparent mode has one IP address.
C. In routed mode, the firewall is considered to be a Layer 2 device.
D. In routed mode, the firewall is considered to be a Layer 3 device.
E. In transparent mode, the firewall is considered to be a Layer 2 device.
F. In transparent mode, the firewall is considered to be a Layer 3 device.
Answer: B,D,E
Q2. Which option is a benefit of the vPC+ feature?
A. Cisco FabricPath is not required in the network domain.
B. This feature provides fault domain separation.
C. Nonfabric devices, such as a server or a classic Ethernet switch, can be connected to two fabric switches that are configured with vPC.
D. The control plane and management plane are combined into one logical plane.
Answer: C
Q3. A campus network in a switch block design requires redundant distribution switches, load sharing across uplinks, a loop-free topology, and only one gateway IP address per VLAN. Which switching technology meets all of the requirements?
A. HSRP
B. VSS
C. Spanning Tree Protocol
D. EtherChannel
Answer: B
Q4. Which four primary attributes define a WAN service? (Choose four.)
A. bandwidth
B. bursting capacity
C. memory
D. CPU
E. QoS classes and policies
F. latency
G. multicast support
Answer: A,B,E,G
Q5. Refer to the exhibit. A customer requires a web application implementation, but the web server has communication only to the application server and users, and the database server has communication only to the application server. What firewall design is the best fit for this scenario?
A. transparent mode with the servers on the same subnet
B. routed mode with three security zones
C. transparent mode with three security zones
D. routed mode with two security zones
Answer: B
Q6. Addressing QoS design in the Enterprise Campus network for IP Telephony applications means what?
A. It is critical to identify aggregation and rate transition points in the network, where preferred traffic and congestion QoS policies should be enforced
B. Suspect traffic should be dropped closest to the source, to minimize wasting network resources
C. An Edge traffic classification scheme should be mapped to the downstream queue configuration
D. Applications and Traffic flows should be classified, marked and policed within the Enterprise Edge of the Enterprise Campus network
Answer: A
Q7. Which statement about data center access layer design modes is correct?
A. The access layer is the first oversubscription point in a data center design.
B. The data center access layer provides the physical-level connections to the server resources and only operates at Layer 3.
C. When using a Layer 2 looped design, VLANs are not extended into the aggregation layer.
D. When using a Layer 3 design, stateful services requiring Layer 2 connectivity are provisioned from the aggregation layer.
Answer: A
Q8. An engineer is designing a new data center network so that the topology maintains fewer uplinks to the aggregation layer to reduce STP processing requirements. What data center topology meets the RFP requirements?
A. mesh
B. top of rack
C. star
D. end of row
Answer: D
Q9. Which two ways to manage scalability issues inside an IBGP domain with 20 or more routers are recommended? (Choose two.)
A. Configure route reflectors.
B. Use OSPF instead of EIGRP as an underlying routing protocol.
C. Create a full mesh at Layer 1.
D. Configure confederations.
E. Configure static routes between all routers.
Answer: A,D
Q10. Which two options improve BGP scalability in a large autonomous system? (Choose two.)
A. route reflectors
B. route redistribution
C. confederations
D. communities
Answer: A,C
Q11. Which statement best describes Cisco OTV internal interfaces?
A. They are Layer 2 interfaces that are configured as either access or trunk interfaces on the switch.
B. They are interfaces that perform Layer 3 forwarding with aggregation switches.
C. They are the interfaces that connect to the ISP.
D. They are tunnel interfaces that are configured with GRE encapsulation.
Answer: A
Q12. Which technology allows multiple instances of a routing table to coexist on the same router simultaneously?
A. VRF
B. Cisco virtual router
C. instanced virtual router
D. IS-IS
Answer: A
Q13. Which two options are storage topologies? (Choose two.)
A. WAS
B. DAS
C. CAS
D. NAS
Answer: B,D
Q14. A e-commerce network has many devices that often need to be upgraded on a regular basis. What technology will ensure IP packets continue to be forwarded even during a device failover?
A. stateful switchover
B. nonstop forwarding
C. route processor redundancy
D. optimized edge routing
E. enhanced object tracking
Answer: B
Q15. A network engineer wants to connect two sites via a WAN technology and to securely pass multicast traffic over this WAN technology. Which WAN technology should be configured?
A. IPsec
B. GRE
C. pure MPLS
D. GRE over IPsec
Answer: D