300-610 Premium Bundle

300-610 Premium Bundle

Designing Cisco Data Center Infrastructure (DCID) Certification Exam

4.5 
(52365 ratings)
0 QuestionsPractice Tests
0 PDFPrint version
November 21, 2024Last update

Cisco 300-610 Free Practice Questions

Pass4sure offers free demo for 300-610 exam. "Designing Cisco Data Center Infrastructure (DCID)", also known as 300-610 exam, is a Cisco Certification. This set of posts, Passing the Cisco 300-610 exam, will help you answer those questions. The 300-610 Questions & Answers covers all the knowledge points of the real exam. 100% real Cisco 300-610 exams and revised by experts!

Free demo questions for Cisco 300-610 Exam Dumps Below:

NEW QUESTION 1
Which type fields can an engineer use to identify an iSCSI participant? (Choose two.)

  • A. type
  • B. preshared key
  • C. port number
  • D. identifying tag
  • E. hostname

Answer: CE

NEW QUESTION 2
Which approach splits a pair of clustered fabric interconnects into two standalone devices?

  • A. Run the disable fips-mode command on each fabric interconnect.
  • B. Run the connect local-management command on each fabric interconnect.
  • C. Erase the configuration of both fabric interconnects.
  • D. Unplug the Layer 1 and Layer 2 interfaces between the devices.

Answer: D

NEW QUESTION 3
What are two advantages of using Cisco vPC over traditional access layer designs? (Choose two.)

  • A. supports Layer 3 port channels
  • B. disables spanning-tree
  • C. no spanning-tree blocked ports
  • D. uses all available uplink bandwidth
  • E. maintains single control plane

Answer: CD

NEW QUESTION 4
When planning to deploy a load-balancing service as a managed node, which ACI configuration must be included?

  • A. BGP ECMP
  • B. Layer 4 to Layer 7 device package
  • C. inline load-balancing device
  • D. ITD

Answer: B

NEW QUESTION 5
Drag and drop the feature descriptions from the left onto the correct UCS Fabric Interconnect modes on the right.
300-610 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
300-610 dumps exhibit

NEW QUESTION 6
Which two statements describe Ethernet switching mode on Cisco UCS 6100 Series Fabric Interconnects? (Choose two.)

  • A. STP runs on the uplink ports of each VLAN, as defined by PVSTP+.
  • B. STP runs on the uplink ports of each VLAN, as defined by MSTP.
  • C. The STP parameter configuration is unsupported.
  • D. The STP parameter configuration is supported.
  • E. STP runs on the server ports.

Answer: AC

NEW QUESTION 7
Which authentication software natively runs within the CLI of Cisco NX-OS devices?

  • A. Python
  • B. Ansible
  • C. Puppet
  • D. Chef

Answer: B

NEW QUESTION 8
Refer to the exhibit.
300-610 dumps exhibit
A Cisco UCS chassis that has two IOMs is discovered. The chassis discovery policy creates a fabric port channel. What is the result of this policy?

  • A. Cisco UCS Manager creates two separate fabric port channels.
  • B. Cisco UCS Manager creates a single fabric port channel.
  • C. The port channel is disabled until an administrator enables it manually.
  • D. Each uplink that connects an IOM is configured as a discrete link.

Answer: A

NEW QUESTION 9
Drag and drop the technologies from the left onto the correct descriptions on the right.
300-610 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
300-610 dumps exhibit

NEW QUESTION 10
Which orchestration tool should be used for the management and analytics of servers across multiple sites?

  • A. Cisco Intersight
  • B. Cisco Nexus Fabric Manager
  • C. Cisco UCS Manager
  • D. Cisco Data Center Network Manager

Answer: A

NEW QUESTION 11
Refer to the exhibit.
300-610 dumps exhibit
What must be the default gateway of the servers in EPG Web?

  • A. subnet address of BD1
  • B. subnet address of L3Out
  • C. subnet address of BD2
  • D. NAT appliance

Answer: D

NEW QUESTION 12
What is the disadvantage of asynchronous storage replication as compared to synchronous storage replication in a disaster recovery design?

  • A. reduction in application performance
  • B. distance limitations
  • C. specific backup requirements
  • D. potential data loss

Answer: D

NEW QUESTION 13
Drag and drop the SAN components from the left onto the correct design considerations on the right.
300-610 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
300-610 dumps exhibit

NEW QUESTION 14
An engineer deploys LISP VM mobility. Which feature is configured on the interfaces that have VM mobility enabled?

  • A. IP redirects
  • B. flow control
  • C. proxy ARP
  • D. HSRP

Answer: C

NEW QUESTION 15
What influences the number of ISLs that are required between Cisco MDS Series switches?

  • A. FCoE protocol
  • B. type of storage
  • C. end-to-end oversubscription ratio
  • D. N Port virtualization

Answer: C

NEW QUESTION 16
An engineer is designing a Multichassis EtherChannel topology in which two switches must appear as a single device to a third downstream switch? Which two technologies meet this requirement? (Choose two.)

  • A. HSRP
  • B. VSS
  • C. vPC
  • D. 802.1q
  • E. FEX

Answer: BC

NEW QUESTION 17
Drag and drop the configurations from the left onto the correct policies on the right.
300-610 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
300-610 dumps exhibit

NEW QUESTION 18
An engineer is designing a data center that uses FCIP. How is QoS configured in this environment?

  • A. A separate DSCP value and CoPP must be configured for all FCIP traffic and another for all of the FCIP in the data connection.
  • B. A separate DSCP value must be configured for all FCIP VSAN traffic.
  • C. A separate DSCP value and priority queuing must be configured for all FCIP traffic.
  • D. Two separate DSCP values must be configured, one of all of the FCIP frames in the control TCP connection and another for all of the FCIP frames in the data connection.

Answer: D

NEW QUESTION 19
What is an advantage of Cisco HyperFlex Edge as compared to Cisco HyperFlex Standard Clusters?

  • A. Cisco Intersight automatically creates an invisible cloud witness.
  • B. Cisco UCS 5108 Blade Server chassis provides SEEPROM connectivity to solve split-brain scenarios.
  • C. Cisco UCS Manager provides service profile portability across nodes.
  • D. Cisco HyperFlex Edge provides native container support through the KVM hypervisor.

Answer: A

NEW QUESTION 20
Drag and drop the components from the left onto the descriptions on the right that indicate what occurs to Fibre Channel fabric when that component fails.
300-610 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
300-610 dumps exhibit

NEW QUESTION 21
Which two features are provided by deploying an OOB management network in a Cisco Nexus data center? (Choose two.)

  • A. Layer 3 path for monitoring purposes
  • B. Layer 2 path for server traffic
  • C. Layer 2 path for a vPC peer link
  • D. Layer 3 path for vPC keepalive packets
  • E. Layer 3 path for server traffic

Answer: BC

NEW QUESTION 22
......

Thanks for reading the newest 300-610 exam dumps! We recommend you to try the PREMIUM Certleader 300-610 dumps in VCE and PDF here: https://www.certleader.com/300-610-dumps.html (60 Q&As Dumps)


START 300-610 EXAM