Cisco 350-501 Free Practice Questions

NEW QUESTION 1
How can a network administrator secure rest APIs?

• A. They can have a general administrator login for multiple users to access that has command entries logged.
• B. They can authenticate user sessions and provide the appropriate privilege level.
• C. They can ensure that user sessions are authenticated using TACACS+ only.
• D. They can allow read and write privileges to all users.

Answer: B

NEW QUESTION 2
How can shared services in an MPLS Layer 3 VPN provide Internet access to the Customers of a central service provider?

• A. Static routes on CE routers allow route leakage from a PE global routing table.
• B. The CE router can establish a BGP peering to a PE router and use the PE device to reach the Internet.
• C. The customer VRF uses route targets to import and export routes to and from a shared services VRF.
• D. Route distinguishers are used to identify the routes that CEs can use to reach the Internet.

Answer: C

NEW QUESTION 3

Refer to the exhibit. A network engineer is configuring customer edge routers to finalize a L2VPN over MPLS deployment. Assume that the AToM L2VPN service that connects the two CEs is configured correctly on the service provider network.
Which action causes the solution to fail?

• A. OSPF does not work with L2VPN services.
• B. The routing protocol network types are not compatible.
• C. A loopback with a /32 IP address has not been used.
• D. The xconnect statement has not been defined.

Answer: B

NEW QUESTION 4
Which statement about segment routing prefix segments is true?

• A. It is the longest path to a node.
• B. It is linked to an adjacency SID that is globally unique within the router.
• C. It is linked to a prefix SID that is globally unique within segment routing domain.
• D. It requires using EIGRP to operate.

Answer: C

NEW QUESTION 5
What is the difference between SNMP and model- driven telemetry?

• A. SNMP uses the YANG data modeling language.
• B. Telemetry uses traps and inform messages to deliver data to a network administrator on a polling basis.
• C. Telemetry allows for modeled network data to be pushed to the network administrator on an as-needed basis.
• D. SNMP pushes network data to the network administrator whenever it is queried.

Answer: C

NEW QUESTION 6

Refer to the exhibit. A network engineer is implementing a BGP protocol. Which effect of the local-as keyword in this configuration is true?

• A. It enables peer 192.168.1.2 to establish a BGP relationship with R1 using AS 65012 without additional configuration.
• B. It enables peer 192.168.1.2 to establish a BGP relationship with R1 using AS 65112 and the VPNv4 address family.
• C. It enables peer 192.168.1.2 to establish a BGP relationship with R1 using AS 65012 and the VPNv4 address family.
• D. It enables peer 192.168.1.2 to establish a BGP relationship with R1 using AS 65112 without additional configuration.

Answer: D

NEW QUESTION 7
Which statement describes the advantage of a Multi-Layer control plane?

• A. It provides multivendor configuration capabilities for Layer 3 to Layer 1.
• B. It automatically provisions, monitors, and manages traffic across Layer 0 to Layer 3.
• C. It supports dynamic wavelength restoration in Layer 0.
• D. It minimizes human error configuring converged networks.

Answer: A

NEW QUESTION 8
Why do packet loops occur during the configuration of BIDIR-PIM?

• A. The network does not support BIDIR-PIM.
• B. The network is partially upgraded to support BIDIR-PIM.
• C. The router has not been configured to advertise itself.
• D. No interface for carrying traffic for multicast groups has been configured.

Answer: B

NEW QUESTION 9
When configuring traffic engineering tunnels in Cisco MPLS core network, you see the traffic is not tacking the expected path in the core.
Which command do you use to quickly check path of a TE tunnel?

• A. traceroute <tunnel destination IP>
• B. show mpls traffic-engineering tunnels
• C. Ping <tunnel destination IP>
• D. traceroute mpls ipv4 <tunnel destination>

Answer: D

NEW QUESTION 10
A regional MPLS VPN provider operates in two regions and wants to provide MPLS L3VPN service for a customer with two sites in these separate locations. The VPN provider approaches another organization to provide backbone carrier services so that the provider can connect to these two locations.
Which statement about this scenario is true?

• A. When edge routers at different regional sites are connected over the global carrier backbone, MP-eBGP must run between the routers to exchange the customer VPNv4 routes.
• B. When eBGP is used for label exchange using the send-label option, MPLS-BGP forwarding is configured under the global ABC CSC PE-to-CE interface.
• C. When BGP is used for both route and label exchange, the neighbor a.b.c.d send-label command is used under the address-family VPNv4 command mode.
• D. When IGP is used for route exchange and LDP for label exchange, MPLS is enabled only on the VRF interface on the backbone-carrier PE side.

Answer: B

NEW QUESTION 11
Refer to the exhibit. Which effect of this configuration is true?

• A. It enables MPLS on the interface.
• B. It creates a pseudowire class named cisco.
• C. It enables AToM on interface gigabitethernet1/0.
• D. It enables tagging for VLAN 12 on the interface.

Answer: C

NEW QUESTION 12

Refer to the exhibit. When implementing an LDP protocol, an engineer experienced an issue between two directly connected routers and noticed that no LDP neighbor exists for 1.1.1.1. Which factor should be the reason for this situation?

• A. LDP needs to be enabled on the R2 loopback interface.
• B. LDP needs to be enabled on the R2 physical interface.
• C. R2 does not see any hellos from R1.
• D. R2 sees the wrong type of hellos from R1.

Answer: B

NEW QUESTION 13

Refer to the exhibit. Which purpose of implementing NSF with this configuration is true?

• A. The router uses NSF to handle RP switchover while allowing neighbor relationships to remain up.
• B. The router uses NSF to reduce neighbor-relationship downtime during RP switchover.
• C. The router uses NSF to load balance traffic on a routed EtherChannel.
• D. The router uses NSF to load balance traffic between two links, with the primary link alternating every 90 seconds.

Answer: A

NEW QUESTION 14

Refer to the exhibit. BGPsec is implemented on R1, R2, R3, and R4. BGP peering is established between neighboring autonomous systems. Which statement about implementation is true?

• A. BGP updates from the iBGP peers are appended with a community of local-as.
• B. BGP updates from the all BGP peers are appended with a community of no-export.
• C. BGP updates from the eBGP peers are appended with an additional AS path value that is statically set by the domain administrator.
• D. BGP updates from the eBGP peers are appended with a BGPsec attribute sequence that includes a public key hash and digital signature.

Answer: D

NEW QUESTION 15

Refer to the exhibit. A network operator working for service provider with an employee id: 1234:56:789 applied this configuration to a router. Which additional step should the engineer use to enable LDP?

• A. Enable MPLS LDP on the interface.
• B. Disable Cisco Express Forwarding globally.
• C. Delete the static router ID.
• D. Configure the both keyword to enable LDP globally.

Answer: A

NEW QUESTION 16
Refer to the exhibit. What is the URL used for with REST API?

• A. It is used to initiate an FTP session to save a running configuration of a device.
• B. It is used to send a message to the APIC to perform an operation on a managed object or class operator.
• C. It is used to contact a URL filter to determine the efficacy of a web address.
• D. It is used to send a TACACS + authentication request to a server.

Answer: B

NEW QUESTION 17
How much must the MTU be increased when configuring the 802.1q VLAN tag?

• A. 2 bytes
• B. 4 bytes
• C. 8 bytes
• D. 12 bytes

Answer: B

NEW QUESTION 18

Refer to the exhibit Router R1 and its peer R2 reside on the same subnet in the network. If an engineer implements this configuration to R1, how does it make connections to R2?

• A. R1 establishes TCP connections that are authenticated with a clear-text password.
• B. R1 establishes UDP connections that are authenticated with an MD5 password.
• C. R1 establishes UDP connections that are authenticated with a clear-text password.
• D. R1 establishes TCP connections that are authenticated with an MD5 password.

Answer: D

NEW QUESTION 19

Refer to the exhibit. What does the REST API command do?

• A. It removes the information identified by Descriptions.xml.
• B. It executes the information specified in Descriptions.xml.
• C. It retrieves the information requested by Descriptions.xml.
• D. It displays the information identified by Descriptions.xml.

Answer: C

NEW QUESTION 20

Refer to the exhibit. Which statement describes the effect of this configuration?

• A. It matches HTTP traffic for use in a policy map.
• B. It applies a service policy to all interfaces remarking HTTP traffic.
• C. It creates an ACL named WEB that filters HTTP traffic.
• D. It modifies the default policy map to allow all HTTP traffic through the router.

Answer: A

NEW QUESTION 21

Refer to the exhibit. An engineer is preparing to implement link aggregation configuration. Which statement about this configuration is true?

• A. The switch port negotiates an EtherChannel if it receives LACP packets from a connected peer running passive mode.
• B. The switch port actively sends packets to negotiate an EtherChannel using PAgP.
• C. The switch port passively negotiates an EtherChannel if it receives PAgP packets from a connected peer.
• D. The switch port accepts LACP and PAgP packets from a connected peer and negotiate an EtherChannel using the common EtherChannel mode.

Answer: B

NEW QUESTION 22

Refer to the exhibit. In which way does router R1 operate differently than router R2?

• A. R1 sends LSA types 5 and 7, while R2 sends type 1, 2, and 7 LSAs.
• B. R1 sends LSA type 2 only, while R2 sends type 1 and type 7 LSAs.
• C. R1 sends LSA type 2 only and R2 sends LSA type 1 only.
• D. R1 sends LSA types 1 and 2, while R2 sends type 1,2, and 7 LSAs.

Answer: D

NEW QUESTION 23
......