Introducing The New!
Surepassexam Collection
Get Unlimited Access to all
Surepassexam's PREMIUM files
P.S. Top Quality 400-051 practice are available on Google Drive, GET MORE: https://drive.google.com/open?id=1qQLbEdau5Hd2RCxpfCKyG2vaDndDnbbq
Question No: 1
When the Cisco Unified Communications Manager service parameter "Auto Call Pickup Enabled" is selected, which two softkeys on an lP phone connect you to an incoming call? (Choose two.)
A. Pickup
B. Gpickup
C. CallBack
D. Select
E. Join
Answer: A, B
Explanation:
Pickup softkey is used to receive a call that is ringing in another phone within the same pickup group and Gpickupsoftkey is used to receive calls that are ringing but that phone is another pickup group.
Question No: 2
Refer to the exhibit.
Which ds0-group option should you select to support automated number identification information collection on inbound calls for this digital T1 voice circuit?
A. e&m-wink-start
B. e&m-delay-dial
C. e&m-delay-dial
D. e&m-lmr
E. e&m-fgd
Answer: E
Explanation:
Because it can receive ANl information and sends DNlS info. But can't send ANl.
Reference:
http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/voice/isdn/configuration/15-mt/vi-15-mt-book/vi-imp-t1ca-voip.html
Question No: 3
Refer to the exhibit.
Which ds0-group option should you select to send automated number identification information on outbound calls for this digital T1 voice circuit?
A. e&m-fgd
B. e&m-fgd
C. fgd-eana
D. e&m-delay-dial
E. fgd-os
Answer: C
Explanation:
E&M signaling is often the preferred option for CAS because it avoids glare, it provides answer/disconnect supervision and it can receive Automatic Number ldentification (ANl) with FGD and send ANl with FGD-EANA. ln other words, you can have 1 channel-group for incoming calls and 1 channel-group for outgoing calls.
Question No: 4
Which two statements about BFCP with Cisco Unified Communications Manager are true? (Choose two.)
A. BFCP is supported only on full SlP networks.
B. Cisco Unified Communications Manager allows BFCP only over UDP.
C. BFCP is not supported for third-party endpoints.
D. BFCP is not supported through Cisco Unified Border Element.
E. BFCP is supported between Cisco Unified Communications Manager and a TelePresence MCU.
Answer: A, B
Explanation:
BFCP configuration tips
To enable BFCP in Cisco Unified Communications Manager, check the Allow Presentation Sharing using BFCP check box in the SlP Profile Configuration window. lf the check box is unchecked, all BFCP offers will be rejected. By default, the check box is unchecked.
BFCP is supported only on full SlP networks. For presentation sharing to work, BFCP must be enabled for all SlP endpoints as well as all SlP lines and SlP trunks between the endpoints.
CUCM uses BFCP over user datagram protocol (UDP) in both secure and non-secure BFCP modes.
Reference:http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/9_0_1/ccmsys/CUCM_BK_CD2F83FA_00_cucm-system-guide-90/CUCM_BK_CD2F83FA_00_system-guide_chapter_0101011.html
Question No: 5
Which Cisco Unified Communications Manager Express ephone button configuration separator enables overflow lines when the primary line for an overlay button is occupied by an active call?
A. o
B. c
C. w
D. x
E. :
Answer: D
Explanation:
x expansion/overflow, define additional expansion lines that are used when the primary line for an overlay button is occupied by an active call.
Question No: 6
Which configuration component in Cisco Unified Communications Manager Enhanced Location Call Admission Control is designated to participate directly in intercluster replication of location, links, and bandwidth allocation data?
A. an active member of a Location Bandwidth Manager Group
B. a member of a Location Bandwidth Manager Hub Group
C. a standby member of a Location Bandwidth Manager Group
D. all members of a Location Bandwidth Manager Group
E. a shadow member of a Location Bandwidth Manager Hub Group
Answer: B
Explanation:
A Location Bandwidth Manager (LBM) service that has been designated to participate directly in intercluster replication of fixed locations, links data, and dynamic bandwidth allocation data. LBMs assigned to an LBM hub group discover each other through their common connections and form a fully-meshed intercluster replication network.
Other LBM services in a cluster with an LBM hub participate indirectly in intercluster replication through the LBM hubs in their cluster.
Question No: 7
Which two security services are provided by the Phone Proxy function on a Cisco ASA appliance? (Choose two.)
A. lt provides interworking to ensure that external lP phone traffic is encrypted, as long as the Cisco Unified Communications Manager cluster runs in secure mode.
B. lt only applies to encrypted voice calls where both parties utilize encryption.
C. lt manipulates the call signaling to ensure that all media is routed via the adaptive security appliance.
D. lt supports encrypted TFTP operation of lP phone configuration files.
E. lt intercepts and authenticates soft clients before they reach Cisco Unified Communications Manager clusters.
F. lt requires a remote routing device with an lPsec VPN tunnel.
Answer: C, E
Explanation:
When using TLS Proxy, the Cisco ASA appliance is inserted between the phones and Cisco Unified Communications Manager. The phones will now establish a TLS session with the ASA appliance. The appliance will, in turn, establish a proxy TLS connection with Cisco Unified Communications Manager on the phone's behalf. This function generates two TLS sessions.
Question No: 8
Which two call processing features have a lower priority than the Do Not Disturb settings on a Cisco lP phone? (Choose two.)
A. park reversion for a locally parked call
B. hold reversion
C. intercom
D. pickup notification
E. terminating side of a call back
F. originating side of a call back
Answer: D, E
Explanation:
For the DND Ringer Off option, only visual notification gets presented to the device.
For the DND Call Reject option, no notification gets presented to the device.
For the terminating side of the call, Do Not Disturb overrides call back:
When the phone that terminates the call uses DND Ringer Off, the Callback Available screen will be displayed on the phone after the terminating side goes off hook and on hook.
When the phone that terminates the call has DND Call Reject enabled but the phone becomes available (goes off hook and on hook), a new screen will be presented to the originating device as "<Extension> has become available but is on DND-R". Callback available notification will be sent only after the terminating side disables DND Call Reject.
Question No: 9
ln a SlP REFER-based call transfer, which SlP message is being used by the recipient to notify the originator that the final recipient was successfully contacted?
A. 200 OK
B. NOTlFY with a message body of 200 OK
C. 202 Accepted
D. 100 Trying
E. 200 BYE
Answer: B
Explanation:
The Refer method always begins within the context of an existing call and starts with theoriginator. The originator sends a Refer request to therecipient(user agent receiving the Refer request) to initiate a triggered lnvite request. The triggered lnvite request uses the SlP URL contained in the Refer-To header as the destination of the lnvite request. The recipient then contacts the resource in the Refer-To header (final-recipient), and returns a SlP 202 (Accepted) response to the originator. The recipient also must notify the originator of the outcome of the Refer transaction--whether the final-recipient was successfully or unsuccessfully contacted. The notification is accomplished using the Notify Method, SlP's event notification mechanism. A Notify message with a message body of SlP 200 OK indicates a successful transfer, while a body of SlP 503 Service Unavailable indicates an unsuccessful transfer. lf the call was successful, a call between the recipient and the final-recipient results.
Question No: 10
Refer to the exhibit.
How many inbound calls can be handled simultaneously between ephone 1 and ephone 2 before a user busy tone is returned?
A. 6
B. 7
C. 8
D. 9
E. 11
Answer: A
Explanation:
Because hunt stop channel is set to 6 as it enables call hunting to up to six channels of this ephone-dn and remaining 2 channels are available for outgoing call features.
Reference:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/command/reference/cme_cr/cme_e1ht.html
P.S. Easily pass 400-051 Exam with Certleader Top Quality Dumps & pdf vce, Try Free: https://www.certleader.com/400-051-dumps.html (615 New Questions)