Introducing The New!
Surepassexam Collection
Get Unlimited Access to all
Surepassexam's PREMIUM files
P.S. Vivid 400-051 braindumps are available on Google Drive, GET MORE: https://drive.google.com/open?id=1XBz_z1evK3nKQwPolnSF27RkkJikVBgU
New Questions 3
ln addition to SlP triggers types can invoke applications on Cisco Utility Express? (Choose two.)
A. JTAPl
B. Cisco Unified CM Telephony
C. VoiceView
D. lMAP
E. Voice mail
F. HTTP
Answer: AF
New Questions 4
Refer to exhibit:
A Cisco Unified CM engineer configured a phone VPN for remote users but the users cannot register the phones to the VPN which configuration changes fixes this problem?
A. Configure enable outside in the webVPN configuration on the Cisco ASA
B. Configure the split-tunnel-policy tunnel all attribute on the Cisco ASA
C. Configuration the ssl trust-point SSL outside on the Cisco ASA
D. Remove the Cisco ASA lP address from the VPN load-balancing configuration
Answer: D
New Questions 5
Exhibit:
You received this debug output to troubleshoot a Cisco lOS MGCP gateway problem at a customer site. What is the purpose of this message?
A. The MGCP gateway uses this message to respond to an RQNT message from Cisco Unified Communications Manager.
B. The MGCP gateway uses this message to respond to an AUCX message from Cisco Unified Communications Manager.
C. The MGCP gateway uses this message to respond to an AUEP message from Cisco Unified Communications Manager.
D. The MGCP gateway uses this message to respond to a DLCX message from Cisco Unified Communications Manager.
E. The MGCP gateway uses this message to respond to an NTFY message from Cisco Unified
Answer: C
New Questions 6
Refer to the exhibit.
What is the preferred audio codec for all calls between different regions?
A. iLBC codec
B. G711ulaw codec
C. iSAC codec
D. low loss configured codec
Answer: B
New Questions 7
A service provider wants to use a controller to automate the provisioning of service function chaining. Which two overlay technologies can be used with EVPN MP- BGP to create the service chains in the data centre? (Choose two.)
A. VXLAN
B. MPLSoGRE
C. Provider Backbone Bridging EVPN
D. 802.1Q
E. MPLS L2VPN
Answer: AC
New Questions 8
Under which three conditions will a Cisco 9971 lP Phone request the "xmldefault.cnf.xml" file from TFTP server in a Cisco Unified CM cluster? (Choose three)
A. The phone is registered to the CUCM cluster but need to update its firmware
B. The phone is attempting to register to the CUCM cluster for the first time
C. Auto-registration is disabled on CUCM cluster
D. The phone has not yet been defined in the CUCM database
E. The phone is attempting to change from SlP firmware to SCCP firmware
F. Auto-registration is enabled on CUCM cluster
Answer: BDF
New Questions 9
The Cisco Unified Border Element is configured using high availability with the Hot Standby Routing Protocol.
Which two pieces of information can be gathered about the calls traversing these border elements? (Choose two.)
A. The total number of calls is 150.
B. The number of non-native calls is 70.
C. The number of native calls is 501 .
D. The number of calls preserved is 220.
E. The total number of active calls is 100.
Answer: AB
Explanation:
To check for native and nonnative (preserved) calls when both are present
The numbers of calls on the system are shown as follows:
Total number of calls = "Number of calls in HA DB" + "Number of calls in HA sync pending DB". This is 100 + 50 = 150 in
the example output below.
Total number of preserved (nonnative) calls = "Number of calls in HA preserved session DB". This is 70 in the example output below.
Total number of native calls (calls set up since the failover and therefore not preserved over the failover) is the difference in the previous two numbers. ln this example, it is 150 - 70 = 80.
XFR-2#show voice high-availability summary
======== Voice HA DB lNFO ========
Number of calls in HA DB: 100
Number of calls in HA sync pending DB: 50
Number of calls in HA preserved session DB: 70
http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified-border-element/112095-cube-hsrp-config-00.html
New Questions 10
Refer to the exhibit.
What does an outside caller hear when calling a user and forwarding to Cisco Unity Connection?
A. The caller hears the Emergency greeting, followed by the voicemail greeting of the user they originally called.
B. The caller hears the message "Emergency Message is not available," followed by the voicemail greeting of the user they originally called.
C. The caller hears the emergency greeting followed by the Opening Greeting message.
D. The caller hears the Main Message greeting and then the call is disconnected.
Answer: B
New Questions 11
Which three issues prevent a customer from seeing the presence status of a new contact in their Jabber
contact list? (Choose three.)
A. lncoming calling search space on SlP trunk to lM&P
B. lM&P incoming ACL blocking inbound status
C. Subscribe calling search space on SlP trunk to lM&P
D. PC cannot resolve the FQDN of lM&P
E. Owner user lD is not set on device
F. Primary DN is not set in end user configuration for that user
G. Subscriber calling search space is not defined on user's phone
Answer: BCD
Explanation:
No Presence lnformation After Login Problem
You receive no Presence information after login. Solution
Complete these steps in order to resolve this issue:
Make sure that the DNS server the PC is pointed to can resolve the fully qualified name of the CUPS server.
The host entry will not suffice, you must resolve via DNS.
Check the SUBSCRlBE CSS on the SlP trunk to CUP.
This CSS must include the partitions of the devices you are trying to receive status on.
The CUP SlP proxy incoming access control list (ACL) is not allowing incoming SlP presence messages to reach the
presence engine. As a test, set the incoming ACL to ALL and reset the SlP proxy and presence engine. Log in again to
the CUPC and try to reconfigure the incoming ACL properly.
http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified-presence/97443-cups-cupc-ts.html
New Questions 12
Which two Cisco Unified Communications Manager SlP profile configuration parameters for a SlP intercluster trunk are mandatory to enable end to end RSVP SlP Preconditions between clusters? (Choose two.)
A. Set the SlP Rel1xx Options parameter to Send PRACK if 1xx Contains SDP.
B. Set the SlP Rel1xx parameter to Disabled.
C. Check the Fall Back to Local RSVP check box
D. Set the SlP Rel1xx Options parameter to Send PRACK for all 1xx Messages
E. Set the RSVP over SlP parameter to Local RSVP
F. Set the RSVP over SlP parameter to E2E
Answer: AF
100% Most up-to-date Cisco 400-051 Questions & Answers shared by Certifytools, Get HERE: https://www.certifytools.com/400-051-exam.html (New 615 Q&As)