Introducing The New!
Surepassexam Collection
Get Unlimited Access to all
Surepassexam's PREMIUM files
Q1. Refer to the exhibit.
Which statement about this COS-DSCP mapping is true?
A. The expedited forwarding DSCP is mapped to COS 3.
B. COS 16 is mapped to DSCP 2.
C. The default COS is mapped to DSCP 32.
D. This mapping is the default COS-DSCP mapping on Cisco switches.
Answer: A
Explanation:
Here we see that COS 3 is mapped to DSCP 46, which is the Expedited forwarding class: The Expedited Forwarding (EF) model is used to provide resources to latency (delay) sensitive real-time, interactive traffic. The EF model uses one marking -- DSCP 46.
Q2. DRAG DROP
Drag and drop the NHRP flag on the left to the corresponding meaning on the right.
Answer:
Q3. Which BGP feature allows a router to maintain its current BGP configuration while it advertises a different AS number to new connections?
A. local-AS
B. next-hop-self
C. allow-AS in
D. soft reset
Answer: A
Explanation:
The local-AS feature allows a router to appear to be a member of a second autonomous system (AS), in addition to its real AS. This feature can only be used for true eBGP peers. The local-AS feature is useful if ISP-A purchases ISP-B, but ISP-B's customers do not want to modify any peering arrangements or configurations. The local-AS feature allows routers in ISP-B to become members of ISP-A's AS. At the same time, these routers appear to their customers to retain their ISP-B AS number.
Reference: http://www.cisco.com/c/en/us/support/docs/ip/border-gateway-protocol-bgp/13761-39.html
Q4. Refer to the exhibit.
If the downstream router has a summary route configured, which two actions must you take on the local router to create the summary route that summarizes all routes from the downstream router? (Choose two.)
A. Configure the summary address on the interface.
B. Use 10.0.0.0 255.248.0.0 as the summary route.
C. Configure the summary address in the EIGRP process.
D. Use 10.0.0.0 255.252.0.0 as the summary route.
E. Configure a route map to permit the route.
F. Configure a distribute list in.
Answer: A,B
Explanation:
Route summarization works in conjunction with the ip summary-address eigrp interface configuration command, in which additional summarization can be performed. To correctly summarize all the networks shown, the correct route to use is 10.0.0.0 255.248.0.0
Reference: http://www.cisco.com/c/en/us/td/docs/ios/12_2/ip/configuration/guide/fipr_c/1cfeigrp.html
Q5. Which two options are benefits of EIGRP OTP? (Choose two.)
A. It allows EIGRP routers to peer across a service provider without the service provider involvement.
B. It allows the customer EIGRP domain to remain contiguous.
C. It requires only minimal support from the service provider.
D. It allows EIGRP neighbors to be discovered dynamically.
E. It fully supports multicast traffic.
F. It allows the administrator to use different autonomous system numbers per EIGRP domain.
Answer: A,B
Explanation:
EIGRP Over the Top (OTP) allows EIGRP routers to peer across a service provider infrastructure without the SP’s involvement. In fact with OTP, the provider won’t see customer routes at all. EIGRP OTP acts as a provider-independent overlay that transports customer data between the customer’s routers. To the customer, the EIGRP domain is contiguous. A customer’s EIGRP router sits at the edge of the provider cloud, and peers with another EIGRP router a different location across the cloud. Learned routes feature a next hop of the customer router — not the provider. Good news for service providers is that customers can deploy EIGRP OTP with their involvement
Reference: http://ethancbanks.com/2013/08/01/an-overview-of-eigrp-over-the-top-otp/
Q6. Which three statements are true about unicast RPF? (Choose three.)
A. Unicast RPF requires CEF to be enabled.
B. Unicast RPF strict mode works better with multihomed networks.
C. Unicast RPF strict mode supports symmetric paths.
D. Unicast RPF strict mode supports asymmetric paths.
E. CEF is optional with Unicast RPF, but when CEF is enabled it provides better performance.
F. Unicast RPF loose mode is typically used with ISP networks.
Answer: A,C,F
Q7. Which two statements about LDP advertising when Explicit Null is in effect are true? (Choose two.)
A. Penultimate hop popping is disabled.
B. Penultimate hop popping is enabled.
C. It is the default behavior for LDP.
D. It is used for the advertisement of static routes.
E. It is used for the advertisement of connected routes.
Answer: A,E
Q8. Which two statements about the default SNMP configuration are true? (Choose two.)
A. The SNMP agent is enabled.
B. The SNMP trap receiver is configured.
C. All SNMP notification types are sent.
D. SNMPv1 is the default version.
E. SNMPv3 is the default version.
Answer: C,D
Explanation:
Default SNMP Configuration
Feature
Default Setting
SNMP agent
Enabled SNMP community strings
Read-Only: Public
Read-WritE. Private
Read-Write-all: Secret
SNMP trap receiver
None configured
SNMP traps
None enabled
SNMP version
If no version keyword is present, the default is version 1.
SNMPv3 authentication
If no keyword is entered, the default is the noauth (noAuthNoPriv) security level.
SNMP notification type
If no type is specified, all notifications are sent.
Reference:
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2950/software/release/12-1_19_ea1/configuration/guide/2950scg/swsnmp.html
Q9. Which two statements about redistribution are true? (Choose two.)
A. EIGRP requires the route to have a default metric defined.
B. EIGRP and OSPF use their router IDs to prevent loops.
C. When OSPF is redistributed into IS-IS, the default metric must be configured under the IS-IS process.
D. When traffic is redistributed into OSPF, the subnets command is needed to redistribute classful subnets.
E. The default seed metric for OSPF redistributed routes is 30.
Answer: A,B
Q10. What is the destination multicast MAC address for BPDUs on the native VLAN, for a switch that is running 802.1D?
A. 0185. C400. 0000
B. 0100.0CCC.CCCC
C. 0100.0CCC.CCCD
D. 0180.C200.0000
Answer: D
Explanation:
If the native vlan is 1:
A STP BPDU for VLAN 1 will be sent untagged to MAC 0180.c200.0000 (this is the
common spanning tree)
A PVST+ BPDU for VLAN 1 will be sent untagged to MAC 0100.0ccc.cccd
A PVST+ BPDU for all other vlans will be sent with a 802.1Q tag to MAC 0100.0ccc.cccd
(with a PVID = to the VLAN)
If the native vlan is not 1:
A STP BPDU for VLAN 1 will be sent untagged (on the native vlan) to MAC
0180.c200.0000 (this is the common spanning tree)
A PVST+ BPDU for VLAN1 will be sent with a 802.1Q tag to MAC 0100.0ccc.cccd (with a PVID=1)
A PVST+ BPDU for the native vlan will be sent untagged to MAC 0100.0ccc.cccd (with a PVID=native vlan)
A PVST+ BPDU for all other vlans will be sent with a 802.1Q tag to MAC 0100.0ccc.cccd (with a PVID = to the VLAN)
Q11. Which two statements are true about unicast RPF? (Choose two.)
A. Unicast RPF requires CEF to be enabled.
B. Unicast RPF strict mode works better with multihomed networks.
C. Unicast RPF strict mode supports symmetric paths.
D. Unicast RPF strict mode supports asymmetric paths.
E. CEF is optional with Unicast RPF, but when CEF is enabled it provides better performance.
Answer: A,C
Explanation:
Unicast RPF requires Cisco express forwarding (CEF) to function properly on the router.
Strict Versus Loose Checking Mode
The Unicast RPF in Strict Mode feature filters ingress IPv4 traffic in strict checking mode and forwards packets only if the following conditions are satisfied.
. An IPv4 packet must be received at an interface with the best return path (route) to the packet source (a process called symmetric routing). There must be a route in the Forwarding Information Base (FIB) that matches the route to the receiving interface. Adding a route in the FIB can be done via static route, network statement, or dynamic routing.
. IPv4 source addresses at the receiving interface must match the routing entry for the interface.
References:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/security/configuration/guide/fsecur_c/scfrpf. html
http://www.cisco.com/c/en/us/td/docs/ios/12_0s/feature/guide/srpf_gsr.html
Q12. For which three routing protocols can Cisco PfR provide direct route control? (Choose three.)
A. OSPF
B. IS-IS
C. BGP
D. EIGRP
E. static routing
F. ODR
Answer: C,D,E
Explanation:
Q. Can you elaborate more on the Parent Route and why it's so important to PfR?
A. Yes. For any route that PfR modifies or controls (BGP, Static, PIRO, EIGRP, PBR), having a Parent prefix in the routing table eliminates the possibility of a routing loop occurring. This is naturally a good thing to prevent in routed networks.
Reference: http://docwiki.cisco.com/wiki/Performance_Routing_FAQs#Route_Control
Q13. Which technology facilitates dynamic tunnel establishment in DMVPN?
A. CEF
B. mGRE
C. a dynamic routing protocol
D. NHRP
Answer: D
Q14. Refer to the exhibit.
Which two commands are required on R3 in order for MPLS to function? (Choose two.)
A. mpls ip
B. ip cef
C. mpls label protocol tdp
D. mpls ip propagate-ttl
Answer: A,B
Q15. Which two statements about TCP are true? (Choose two.)
A. TCP option must be divisible by 32.
B. It has a 16-bit window size.
C. Its maximum data offset is fifteen 32-bit words.
D. It has a 32-bit window size.
E. Its maximum data offset is ten 32-bit words.
F. It has a 32-bit checksum field.
Answer: B,C