- Home
- Alcatel-Lucent
- 4A0-100 Exam
Alcatel-Lucent 4A0-100 Free Practice Questions
It is impossible to pass Alcatel-Lucent 4A0-100 exam without any help in the short term. Come to us soon and find the most advanced, correct and guaranteed 4A0-100 Dumps Questions. You will get a surprising result by our 4A0-100 Exam Questions and Answers.
Free 4A0-100 Demo Online For Microsoft Certifitcation:
NEW QUESTION 1
Which of the following user interface sessions are accessible through Telnet and Secure Shell (SSH) on the Alcatel-Lucent 7750 SR and 7450 ESS?
- A. Graphic User Interface (GUI).
- B. Node Management Terminal Interface (NMTI).
- C. Command Line Interface (CLI).
- D. All of the abov
Answer: C
NEW QUESTION 2
From the CE perspective, how does a VPLS operate?
- A. A VPLS operates as if 2 sites are directly connected by a single cabl
- B. A VPLS operates as if multiple sites are connected through a single switched LA
- C. A VPLS operates as ifmultiplesites are connected through a single route
- D. A VPLSoperatesas if multiple sites are connected through a series of private point-to-point routed connection
Answer: B
NEW QUESTION 3
Which of the following best describes an autonomous system?
- A. An autonomous system is a network or group of networks operating under one administrative authorit
- B. An autonomous system is another term for the collection of routers that make up the Internet
- C. An autonomous system is a network or group of networks from many organizations running different IGP routing protocols, but all running BG
- D. An autonomous system is a loosely defined term that can refer to any organization that has a connection to the Interne
Answer: A
NEW QUESTION 4
Which of the following is NOT a function of TCP?
- A. Maintaining the ordering of data transmitted across the networ
- B. Ensuring the reliable transmission of data across the networ
- C. Providing the receiver with a flow control mechanis
- D. Defining the method for routing data across the networ
Answer: D
NEW QUESTION 5
Given the associated prefix value, which of the following is a valid host address?
- A. 172.16.224.255/18
- B. 255.255.255.255/32
- C. 224.1.2.1/8
- D. 192.168.24.59/30
Answer: A
NEW QUESTION 6
What is required if devices on different VLANs wish to communicate with each other?
- A. Devices on different VLANs cannot communicate with each othe
- B. Devices on different VLANs can communicate with each other as long as they are connected to the same switc
- C. Devices on different VLANs can communicate with each other as long as the switches they are attached to are connected to each other with an Ethernet connectio
- D. Devices on different VLANs can communicate with each other if there is an IP router to connect the VLAN
Answer: D
NEW QUESTION 7
Which protocol is used by ping to verify IP network reachability? A. DCHP
Answer: B
NEW QUESTION 8
What is thebehaviorof a typical Ethernet switch when it receives a frame with auncastdestination MAC address? (Choose two)
- A. The switch floods the frame out of all ports except the port on which it was receive
- B. The switch looks in its FD
- C. If the source address is unknown it discards the fram
- D. The switch looks in its FD
- E. If the destination address is known it forwards the frame out the appropriate interfac
- F. The switch looks in its FD
- G. If the destination address is unknown it floods the frame out all ports except the port on which it was receive
- H. The switch looks in its FD
- I. If the destination address is unknown it discards the fram
Answer: CD
NEW QUESTION 9
SAPs may be a port, a port with a specific VLAN tag in the case of an Ethernet port, or a port with a specific Circuit ID in the case of ATM or Frame Relay.
Answer: A
NEW QUESTION 10
Which of the following type of addressing scheme delivers information from one source to all devices who are members of a specific group?
- A. Anycas
- B. Multicas
- C. Broadcas
- D. Unicas
Answer: B
NEW QUESTION 11
What distance is supported using CAT-5 cabling for 10/100/1000 TX?
- A. 100
- B. 500
- C. 1 K
- D. 10 K
Answer: A
NEW QUESTION 12
The TiMOS-m.n.Y.Z software image file is software that:
- A. Contains all the components required to configure and run protocols on the Alcatel-Lucent 7750 SR/7450 ES
- B. Loads the router configuratio
- C. Transfers the router configuration from the router to the network management syste
- D. Loads the router software imag
Answer: A
NEW QUESTION 13
What is the basic unit of framing in SDH and the bit rate for transmission?
- A. STM-1 with a bit rate of 1.544 Mbit/
- B. STM-1 with a bit rate of 2.048 Mbit/
- C. STM-1 with a bit rate of 51.84 Mbit/
- D. STM-1 with a bit rate of 155.52 Mbit/
Answer: D
NEW QUESTION 14
Which of the following is a characteristic of Layer 2 framing?
- A. Provides a universal addressing scheme to uniquely identify destinations in the network
- B. Size of frame cannot exceed 1518 byte
- C. Provides error checking of the frame contents on ingres
- D. All of the abov
Answer: C
NEW QUESTION 15
How many DS-3 frames can be transported in an OC-3 frame?
Answer: C
NEW QUESTION 16
Which of the following best describes the function of the service label?
- A. Customer traffic is encapsulated with a service label by the ingress P
- B. The service label identifies which transport tunnel to us
- C. Customer traffic is encapsulated with a service label by the egress P
- D. The service label identifies which transport tunnel to us
- E. Customer traffic is encapsulated with a service label by the egress P
- F. The service label identifies the specific service the data belongs t
- G. Customer traffic is encapsulated with a service label by the ingress P
- H. The service label identifies the specific service the data belongs t
Answer: D
NEW QUESTION 17
Based on the network diagram (click the Exhibit Button),
what is the next-hop used on R1 to setup a static route to the network on CR1?
- A. next-hop 10.2.3.2
- B. next-hop 192.168.2.1
- C. next-hop 10.2 3.1
- D. next-hop 192.168.2.0
Answer: C
NEW QUESTION 18
(Click the Exhibit Button below)
An Ethernet Local Area Network (LAN) consists of the
following components:
Four 24-port hubs & Two 16-port switches
How many broadcast domains are on this LAN?
Answer: A
NEW QUESTION 19
What problem was Spanning Tree Protocol (STP) primarily designed to solve?
- A. Inability to perform switch to switch redundancy using multiple connections at Layer 2.
- B. Missing protocol field in Ethernet II required to identify redundancy protocols at Layer 2.
- C. Missing packet sequencing in Layer 2 Ethernet required to re-order packets on arriva
- D. Inability to forward multicast frames without a routing protoco
Answer: A
100% Valid and Newest Version 4A0-100 Questions & Answers shared by 2passeasy, Get Full Dumps HERE: https://www.2passeasy.com/dumps/4A0-100/ (New 225 Q&As)
