Introducing The New!
Surepassexam Collection
Get Unlimited Access to all
Surepassexam's PREMIUM files
Q1. Which two modes of setup are offered on the initial setup script on a Cisco UCS Fabric Interconnect? (Choose two.)
A. Restore
B. Setup
C. Console
D. Serial
E. Management 0
Answer: A,B
Q2. What option should be verified before configuring UCSM?
A. verify physical connection on fabric interconnect
B. verify Default Gateway
C. verify DNS Server
D. verify VLAN Configuration
Answer: A
Q3. Which is the correct port mapping for a Fibre Channel HBA connected to a Cisco MDS Fibre Channel switch?
A. H_Port to N_Port
B. N_Port to S_Port
C. H_Port to S_Port
D. N_Port to F_Port
E. H_Port to F_Port
Answer: D
Q4. Which Cisco Nexus 2000 Series Fabric Extender supports FCoE?
A. 2148T
B. 2224T
C. 2248T
D. 2248TP
E. 2232PP
F. 2232TM
Answer: E
Q5. Which commands issued on the Cisco Nexus 1000V VSM push the port profile named VMdata to the VMware vCenter server?
A. N1000v-VSM(config)# port-profile VMdata N1000v-VSM(config-port-prof)# no shutdown
B. N1000v-VSM(config)# port-profile VMdata N1000v-VSM(config-port-prof)# push profile
C. N1000v-VSM(config)# port-profile VMdata N1000v-VSM(config-port-prof)# state enabled
D. N1000v-VSM(config)# port-profile VMdata N1000v-VSM(config-port-prof)# update profile
Answer: C
Q6. RAG DROP
Drag the Network virtualization technology on the left to the correct definition on the right.
Answer:
Q7. Which two are functional layers of a collapsed-core LAN design? (Choose two.)
A. core
B. aggregation
C. access
D. distribution
E. services
Answer: A,C
Q8. Which three components are needed to implement FCoE? (Choose three.)
A. FCoE Initialization Protocol
B. N_Port virtualization
C. N_Port ID virtualization
D. converged network adapter
E. priority flow control
Answer: A,D,E
Q9. A company is considering unifying the data center fabrics. What two technologies will allow IP traffic and the Fibre Channel to run over the same fabric? (Choose two.)
A. Rapid Spanning Tree
B. Fibre Channel over Ethernet
C. Overlay Transport Virtualization
D. Data Center Bridging Exchange Protocol
E. InfiniBand
Answer: B,D
Q10. Which three are the three primary methods to configure Cisco UCS B-Series systems? (Choose three.)
A. SNMP
B. XML API
C. UCS Manager GUI
D. IPMI
E. UCS Manager CLI
F. CIM-XML
Answer: B,C,E
Q11. Which three are required components of a Cisco Nexus 1000V deployment? (Choose three.)
A. Adapter FEX
B. Virtual Ethernet Module
C. Virtual Fibre Channel Module
D. Virtual Supervisor Module
E. License key
F. VM-Fex
Answer: B,D,E
Q12. For which two reasons should customers deploy FCoE beyond the access layer? (Choose two.)
A. higher throughput compared to traditional Fibre Channel
B. better security than traditional Fibre Channel
C. device consolidation
D. FCoE cannot be deployed beyond the access layer.
Answer: A,C
Q13. What is the licensing grace period allowed on Cisco Nexus 7000 Series Switches?
A. 30 days
B. 60 days
C. 90 days
D. 120 days
E. 150 days
F. 180 days
Answer: D
Q14. What two options are key features for UCSM Manager? (Choose two.)
A. Policy Based Management
B. Manual Discovery
C. Firmware provisioning
D. Low Availability
E. Supports Fabric-Path
Answer: A,C
Q15. An engineer is configuring a new MDS switch. The switch is powered on, the customer connects to the console, and the initial setup script is started. Which two items can be configured during this setup process? (Choose two.)
A. default switchport interface state
B. default zone mode
C. default port-channel mode
D. default storage VDC
E. default port VSAN membership
Answer: A,B
Q16. Which SAN port type allows multihop FCoE between two SAN switches?
A. VN
B. VE
C. VF
D. E
Answer: B
Q17. Which is a function of the data center access layer?
A. repeater
B. high-speed packet switching
C. access control
D. firewalling and Intrusion Prevention
E. services layer
F. QoS marking
Answer: F