Introducing The New!
Surepassexam Collection
Get Unlimited Access to all
Surepassexam's PREMIUM files
Q1. Which command issued on the Cisco Nexus 1000V VSM displays the connected VEMs?
A. N1000v-VSM# show vem
B. N1000v-VSM# vem status
C. N1000v-VSM# show module
D. N1000v-VSM# show vem status
E. N1000v-VSM# show vem inventory
Answer: C
Q2. Which command pings from the Cisco Nexus 5548 interface mgmt 0 to host 10.10.1.1?
A. ping -m 10.10.1.1
B. ping 10.10.1.1 -m
C. ping 10.10.1.1 vrf management
D. ping 10.10.1.1 vrf default
Answer: C
Q3. Which two are configuration elements selected during initial setup of the Cisco Nexus 7000 Series Switches? (Choose two.)
A. Telnet bits
B. SNMPv3 community strings
C. VDC mode
D. Default interface layer
E. Default interface state
F. CoPP
Answer: D,E
Q4. Which three devices support FCoE? (Choose three.)
A. Cisco Nexus 5500
B. Cisco Nexus 7000
C. Cisco Nexus 3000
D. Cisco Nexus 1000V
E. Cisco UCS Fabric Interconnect
Answer: A,B,E
Q5. Which two are controls between initiators and targets on a Fibre Channel network? (Choose two.)
A. Fibre Channel fencing
B. LUN masking
C. zoning
D. access control list
E. port security
Answer: B,C
Q6. Which four are valid options for connecting a host to data center storage? (Choose four.)
A. Telnet
B. SSH
C. iSCSI
D. Fibre Channel
E. NFS
F. CIFS
Answer: C,D,E,F
Q7. Which is employed by Cisco Nexus 7000 switching products to create multiple logical switches?
A. VLAN
B. VTP
C. VRF
D. VDC
E. vPC
Answer: D
Q8. {exhibit 1805}
Refer to the exhibit. NP uplink ports connected to the core NPIV switch do not come online and are stuck in an initializing state. What is the cause that NP Uplink ports on NPV edge switch are stuck in initializing state?
A. The upstream NP Ports and the downstream server F Ports on the NPV edge switch may not be in the same VSA.
B. The core switch has not been enabled for NPIV.
C. The upstream VSAN ports and the server ports are in full duplex mode.
D. Related VSAN identifier is not allowed on Virtual Port Channels toward the edge switch.
Answer: B
Q9. Which item best describes the STP requirements for Cisco FabricPath?
A. RPVST must be configured on every Cisco FabricPath VLAN.
B. RPVST must be configured on every Cisco FabricPath Border interface.
C. MST must be configured on every Cisco FabricPath VLAN.
D. MST must be configured on every Cisco FPBI.
E. STP is required only to resolve border link failures.
F. STP is not required on Cisco FabricPath interfaces.
Answer: F
Q10. What is the purpose of the Destination VIF field in the VNTag header?
A. identify the physical satellite port on a Cisco Nexus 2000 Series fabric extender
B. identify the virtual satellite port on a Cisco Nexus 2000 Series fabric extender
C. identify the physical satellite port on a Cisco Nexus 7000 Series Switch
D. identify the fabric port on a Cisco Nexus 2000 Series fabric extender
Answer: A
Q11. On which layer of the tiered data center architecture do service modules such as FWSM, ACE, and WAAS typically appear?
A. access
B. services
C. aggregation
D. transport
E. network
F. core
Answer: C
Q12. What are the three basic states of an Ethernet interface on a Cisco Unified Computing
System Fabric Interconnect? (Choose three.)
A. unconfigured
B. enabled
C. disabled
D. uplink
E. server
F. errdisabled
Answer: A,D,E
Q13. Which command issued on the Cisco Nexus 1000V VSM validates the connection to the VMware vCenter server?
A. N1000v-VSM# show vmware-vim
B. N1000v-VSM# show connections vmware
C. N1000v-VSM# show svs connections
D. N1000v-VSM# show vcenter status
Answer: C
Q14. Which option describes what VNTags are used for?
A. to separate broadcast domains
B. to identify and separate virtual interfaces
C. to prioritize FCoE traffic
D. to extend a Layer 2 domain across a Layer 3 boundary
Answer: B
Q15. Which four Cisco Nexus 2000 Series Fabric Extenders support host port channels? (Choose four.)
A. 2148T
B. 2224T
C. 2248T
D. 2248TP
E. 2232PP
F. 2232TM
Answer: C,D,E,F
Q16. Which two Cisco Nexus switches are capable of Layer 3 switching? (Choose two.)
A. Cisco Nexus 7010
B. Cisco Nexus 5020
C. Cisco Nexus 5548
D. Cisco Nexus 2248
E. Cisco Nexus 2232
Answer: A,C
Q17. Which is the correct command to install a feature license on Cisco MDS 9100 Series Fibre Channel Switches?
A. MDS-A# install license bootflash:license_file.lic
B. MDS-A# copy license bootflash:license_file.lic running-config
C. MDS-A# install feature bootflash:license_file.lic
D. MDS-A# copy feature bootflash:license_file.lic running-config
E. MDS-A# update license pool bootflash:license_file.lic
Answer: A