Introducing The New!
Surepassexam Collection
Get Unlimited Access to all
Surepassexam's PREMIUM files
Q1. You work as the network administrator at ABC.com. You are deploying a top-of-rack equipment distribution and cabling design for the company network. Which benefit results does the network get from the deployment?
A.optimal port utilization in the rack
B.improved cable management across racks
C.faster convergence for Layer 2 services
D.security and application networking at the access layer
Answer: B
Q2. Which option should be included in the data center design if it must support zone-based firewalling on a per virtual machine basis, while preserving full virtual machine mobility without manual intervention?
A.Cisco Virtual Services Gateway with vPath
B.Cisco Nexus 1000v Advanced Edition with Prime Network Services Controller
C.Cisco Nexus 5500 Series Layer 3 module
D.strict unicast RPF
Answer: B
Q3. What introduces unique implications into the overall Data Center aggregation layer design? (Choose Three.)
A.High-speed switching fabric with a high forwarding rate
B.Over-subscription values
C.Service Modules
D.IP routing
E.WAN
F.Internet Edge
Answer: ABC
Q4. Which transceiver/cable type combination is the most cost effective solution to connect a Cisco Nexus 5548UP switch to a Nexus 2232PP fabric extender within the same rack?
A.Cisco FET-10G with OM3 cable
B.SFP-10GR with OM3 fiber cable
C.active Twinax cable
D.SFP-10GR with OM4 fiber cable
E.passive Twinax cable
Answer: E
Q5. Which three protocols are effective in minimizing the use of STP in the data center design? (Choose three.)
A.FCoE
B.vPC
C.vDC
D.FabricPath
E.802.1ad
F.STP
Answer: ABD
Q6. Which three options does Cisco Data Mobility Manager provide? (Choose three.)
A.can change the migration rate to shorten windows during low traffic hours or minimize interference
B.brings the need for multiple migration solutions
C.moves from a smaller logical unit number to a larger LUN
D.manages all capabilities from an easy-to-use GUI
E.manages all capabilities from CLI
F.can change the migration rate to shorten windows during high traffic hours or maximize interference
G.manages some capabilities from an easy-to-use GUI
Answer: ACD
Q7. What is one example that is true concerning network management for the data center?
A. The Network Analysis Module is best deployed in the core for highest visibility.
B.The Network Analysis Module is best deployed in the core for highest visibility.
C.It utilizes flexible NetFlow for enhanced network anomaly and security detection.
D.NetFlow support is available on most IOS and Nexus products, excluding the Nexus 1000v.
E.NetFlow Data Export is best positioned on the Nexus 5500 at the access or aggregation layers.
Answer: B
Q8. In the data center architecture, which layer performs load balancing between data centers?
A.Core layer
B.Access layer
C.Aggregation layer
D.Collapse core
Answer: A
Q9. Your customer has asked you to recommend a data center storage design that includes Multihop FCoE for 400 database servers running on Cisco UCS C460M2 Rack Servers with Cisco UCS VIC 1225. Which of these server connectivity options is Cisco recommended for scalability and cost-effectiveness?
A.Server > Cisco Nexus 5548UP > Cisco Nexus 7018 > CISCO MDS 9500
B.Server > Cisco Nexus 3548 > Cisco Nexus 7018 > CISCO MDS 9500
C.Server > Cisco Nexus 2232PP > Cisco Nexus 7018 > CISCO MDS 9500
D.Server > Cisco Nexus 4001i > Cisco Nexus 7018 > CISCO MDS 9500
Answer: C
Q10. Which tool provides centralized device and security policy management for Cisco VSG?
A.Cisco ANM
B.Flexible NetFlow
C.Cisco Prime LMS
D.Cisco Prime DCNM for LAN
E.Cisco Prime DCNM for SAN
F.Cisco VNMC
Answer: F
Q11. What is required to be configured in VMware vCenter to allow a VM direct access to a Fibre Channel LUN?
A.DirectPath I/O
B.VM-FEX
C.Adapter FEX
D.Raw Device Mapping
E.Solid State Drive
Answer: D
Q12. Your customer would like to run FCoE in the access layer. Which fabric extender should the customer utilize in its design?
A.Cisco Nexus 2148T
B.Cisco Nexus 2224TP
C.Cisco Nexus 2248TP-F
D.Cisco Nexus 2232PP
Answer: D
Q13. Which three characteristics are associated with the access layer of a Data Center Unified Fabric network? (Choose three.)
A.no packet manipulation
B.QoS—policing
C.voice, data, and wireless convergence
D.scalable routing protocols like OSPF
E.provides default gateway redundancy
F.QoS - classification and queuing
G.routing manipulation and filtering
H.aggregates end users
Answer: CFH
Q14. Which tool is used to manage NX-OS devices and features like vDC and vPC?
A.Cisco ANM
B.Flexible NetFlow
C.Cisco Prime LMS
D.Cisco Prime DCNM for LAN
E.Cisco Prime DCNM for SAN
F.Cisco VNMC
Answer: D
Q15. Refer to the exhibit.
Which four options are Cisco best practices that should be included or implemented in the design for resiliency, deterministic behavior, and fast convergence in case of link failures? (Choose four.)
A.Add additional OSPF adjacency between N7K-1 and N7K-2 via dedicated Layer 3 link.
B.Configure vPC peer-gateway in the vPC domain between N7K-1 and N7K-2.
C.Use point-to-point OSPF adjacencies.
D.Place the primary FHRP role on N7K-1.
E.Configure Layer 3 port channels between all N7K devices.
F.N7K-3 and N7K-4 must be the OSPF designated routers.
G.Place the primary FHRP role on N7K-2.
H.All OSPF adjacencies should be between loopback interfaces.
Answer: ABCG