Introducing The New!
Surepassexam Collection
Get Unlimited Access to all
Surepassexam's PREMIUM files
Q1. Refer to the command below. When configuring an SVS connection on the Cisco Nexus 5000 Series Switch, which device is being referenced as the remote IP address?
nexus5500-2(config-svs-conn)# remote ip address 10.10.1.15 port 80 vrf management
A. ESX or ESXi host
B. vCenter
C. vPC peer switch
D. Cisco IMC management
Answer: B
Q2. Refer to the exhibit.
What is the consequence of configuring peer-gateway on the two vPC peers N7K-1 and N7K-2?
A. Nothing, this is the standard vPC configuration to make the feature work.
B. The downstream device detects only one of the vPC peers as its gateway.
C. The downstream device can use DMAC of N7K-1 on the link to N7K-2, and N7K-2 forwards the packet.
D. This configuration enables the downstream device to use DHCP to obtain its default gateway.
Answer: C
Q3. Which two statements about implementing Cisco NPV and NPIV on a Cisco Nexus 5000 Series switch are true? (Choose two.)
A. STP must run inside the FP network.
B. All VLANs must be in the same mode, CE, or FP.
C. FP port can join the private and nonprivate VLANs.
D. Only F and M series modules can run FabricPath.
E. These require an enhanced Layer 2 license to run.
Answer: BE
Q4.
Ethernet interface 1/5 on Cisco Nexus 5548 is connected to Cisco UCS C220 rack server. What is the status of Ethernet 1/5 interface for FCoE functionality?
A. Interface reset on Ethernet 1/5 is preventing the FCoE connection from coming up
B. MTU size of 1500 on Ethernet interface 1/5 needs to be changed for FCoE to come UP
C. Cisco Nexus 5548 needs a layer 3 daughter card for FCoE to come UP on the Ethernet interface 1/5
D. Ethernet interface 1/5 is operational for FCoE and the status is UP
Answer: D
Q5. Refer to the exhibit.
Which three statements about the Cisco Nexus 7000 switch are true? (Choose three.)
A. An emulated switch ID must be unique when the vPC+ feature is used.
B. Switches with FabricPath and vPC+ consume two switch IDs.
C. Emulated switch IDs must be numbered from 1 to 99.
D. Each switch ID must be unique in the FabricPath topology.
E. Switch IDs must be configured manually.
Answer: BDE
Q6.
On a Cisco Nexus7000 switches what is true regarding Cisco FabrciPath requirements?
A. Ensure that you have installed the Enhanced Layer 2 license and that you have installed an F Series module
B. Ensure that you have installed the Enhanced Layer 2 license and that you have installed an M Series module
C. Ensure that you have installed the Enhanced Layer 3 license and that you have installed an M Series module
D. Ensure that you have installed the Scalable Feature License license and that you have installed an F Series module
Answer: A
Q7. Which three selections represent implementations of Cisco VN-Link technology? (Choose three.)
A. Cisco Nexus 1000V
B. Cisco Nexus 2000 FEX
C. Cisco VM-FEX
D. VMware PTS
E. vMotion
Answer: ACD
Q8. Which two items are required components of VN-Link in software? (Choose two.)
A. VDC
B. VEM
C. vPC
D. VSM
E. VRRP
Answer: BD
Q9. Which two Cisco Nexus platforms support Adapter FEX? (Choose two.)
A. Cisco Nexus 7000 Series Switches
B. Cisco Nexus 5000 Series Switches
C. Cisco Nexus 5500 Series Switches
D. Cisco Nexus 4000 Series Switches
E. Cisco Nexus 2000 Series Fabric Extenders
Answer: CE
Q10. Which statement about core-edge SAN topology is true?
A. Converged FCoE links connect the core and edge MDS switches.
B. The SAN core connects to the network aggregation layer.
C. Separate links with the same I/O are used for SAN and LAN traffic.
D. Storage devices are accessed via FCoE over the LAN network.
Answer: B
Q11. On a Cisco Nexus 7000 Series router, which statement about HSRP and VRRP is true?
A. When VDCs are in use, only VRRP is supported.
B. HSRP and VRRP both use the same multicast IP address with different port numbers.
C. HSRP has shorter default hold and hello times.
D. The VRRP group IP address can be the same as the router-specific IP address.
Answer: D
Q12. Which two statements about SAN zoning on Cisco Nexus switches are true? (Choose two.)
A. Unlike configured zones, default zone information is not distributed to the other switches in the fabric.
B. Traffic can either be permitted or denied among members of the default zone. This information is not distributed to all switches. It must be configured in each switch.
C. The settings for default zone configurations cannot be changed.
D. To activate a zone set, you must copy the running configuration to the startup configuration after the zone set is configured.
E. Soft zoning restrictions will not prevent a source device from accessing a device outside its zone, if the source knows the Fibre Channel ID of the destination.
F. Hard zoning is enforced by the hardware on each FLOGI sent by an N Port.
Answer: BE
Q13. Which two security features are only supported on the Cisco Nexus 7000 Series Switches? (Choose two.)
A. IP source guard
B. traffic storm control
C. CoPP
D. DHCP snooping
E. Dynamic ARP Inspection
F. NAC
Answer: BF
Q14. Refer to the exhibit.
Which statement based on these two outputs that were collected 24 hours apart is true?
A. The Site 2 OTV edge device has gone down.
B. The MAC address cannot be discovered on two separate port channel interfaces.
C. The MAC address that ends in 020a moved to the local site 23 hours ago.
D. The Overlay1 IP address should be a multicast IP address.
Answer: C
Q15. When connecting Cisco Nexus 5000 Series Switches to the VMware vCenter Server, which item must be configured before installing the extension keys?
A. configure vPC
B. configure DirectPath I/O support in vCenter
C. configure PTS on the VSM
D. configure dynamic vNICs
Answer: A
Q16. Which policy-map action performs congestion avoidance?
A. priority
B. bandwidth
C. queue-limit
D. random-detect
Answer: D