Introducing The New!
Surepassexam Collection
Get Unlimited Access to all
Surepassexam's PREMIUM files
Q1. Refer to the command below. When configuring an SVS connection on the Cisco Nexus 5000 Series Switch, which device is being referenced as the remote IP address?
nexus5500-2(config-svs-conn)# remote ip address 10.10.1.15 port 80 vrf management
A. ESX or ESXi host
B. vCenter
C. vPC peer switch
D. Cisco IMC management
Answer: B
Q2.
What is effect of the command fabricpath load-balance unicast Iayer3"?
A. It configures F2 VDC FabricPath unicast load balancing
B. The command automatically load balances broadcast traffic
C. It configures F1/MI VDC FabricPath unicast load balancing
D. It configures M1 VDC FabricPath unicast load balancing
Answer: C
Q3.
On a Cisco Nexus7000 switches what is true regarding Cisco FabrciPath requirements?
A. Ensure that you have installed the Enhanced Layer 2 license and that you have installed an F Series module
B. Ensure that you have installed the Enhanced Layer 2 license and that you have installed an M Series module
C. Ensure that you have installed the Enhanced Layer 3 license and that you have installed an M Series module
D. Ensure that you have installed the Scalable Feature License license and that you have installed an F Series module
Answer: A
Q4. Which two reasons explain why a server on VLAN 10 is unable to join a multicast stream that originates on VLAN 20? (Choose two.)
A. IGMP snooping and mrouter are not enabled on VLAN 10.
B. VLAN 20 has no IGMP snooping querier defined and VLAN 10 has no mrouter.
C. The mrouter on VLAN 20 does not see the PIM join.
D. The mrouter must be on VLAN 10 and VLAN 20.
Answer: AC
Q5. Which two statements about implementing Cisco NPV and NPIV on a Cisco Nexus 5000 Series switch are true? (Choose two.)
A. STP must run inside the FP network.
B. All VLANs must be in the same mode, CE, or FP.
C. FP port can join the private and nonprivate VLANs.
D. Only F and M series modules can run FabricPath.
E. These require an enhanced Layer 2 license to run.
Answer: BE
Q6. What is an Overlay Transport Virtualization extended VLAN?
A. the VLAN used to locate other AEDs
B. the VLAN used to access the overlay network by the join interface
C. the user VLAN that exists in multiple sites
D. the VLAN that must contain the overlay interface
Answer: C
Q7. Which two items are features that are available in VN-Link in software? (Choose two.)
A. VM snapshot
B. NetFlow
C. ERSPAN
D. high availability
E. resource reservations
Answer: BC
Q8. When a local RBAC user account has the same name as a remote user account on an AAA server, what happens when a user with that name logs into a Cisco Nexus switch?
A. The user roles from the remote AAA user account are applied, not the configured local user roles.
B. All the roles are merged (logical OR).
C. The user roles from the local user account are applied, not the remote AAA user roles.
D. Only the roles that are defined on both accounts are merged (logical AND).
Answer: C
Q9. Which two statements about Cisco Nexus 7000 line cards are true? (Choose two.)
A. M1, M2, and F1 cards are allowed in the same VDC.
B. M line cards are service-oriented and likely face the access layer and provide Layer 2 connectivity.
C. F line cards are performance-oriented and likely connect northbound to the core layer for Layer 3 connectivity.
D. M line cards support Layer 2, Layer 3, and Layer 4 with large forwarding tables and a rich feature set.
E. The F2 line card must reside in the admin VDC.
Answer: AD
Q10.
What is the status of FCoE license on Cisco Nexus 5548 switch?
A. FCoE license is not installed
B. FCoE license is installed, but it is expired
C. FCoE license is installed and status is enabled
D. FCoE license does not need to be installed because it is part of ENTERPRISE_PKG
Answer: A
Q11.
Customer has configured fabhcpath allocate-delay to 600. What is the effect of this?
A. The allocate-delay is the time for FPto go into forwarding state
B. It specifies the time delay for a transitioned value to be propagated throughout the network
C. It specifies the time delay for a link bringup to detect conflicts
D. The allocate-delay is the time delay for a new resource to be propagated throughout the network
Answer: D
Q12. Refer to the exhibit.
Which corrective action is taken to resolve the problem?
A. Trunk four VLANs on interface ethernet 199/1/1.
B. Use the shut and no shut interface ethernet 199/1/1so that the VLANs come up.
C. Place interface ethernet 199/1/1 in VLAN 4 in the N5K-2 configuration.
D. Prune all but four VLANs from vPC 199.
E. Add VLAN 4 to vPC 199.
Answer: C
Q13. Which statement about enhanced zoning on Cisco Multilayer Director Switches are true?
A. It allows partial zone set changes to be distributed without having to activate a zone set.
B. Enhanced zoning is compatible with IVR.
C. Zone changes can scheduled with a CRON job.
D. More than one zone set can be active with enhanced zoning.
Answer: A
Q14. DRAG DROP
Answer:
Q15. What configuration is required when implementing FCoE?
A. disable LAN traffic on the interface
B. configure PortFast on the access port
C. permit all VLANs on the interface
D. permit all VSANs on the interface
Answer: A
Q16. In policy-based routing, which action is taken for packets that do not match any of the route-map statements?
A. forwarded after the egress queue empties on the outbound interface
B. forwarded using the last statement in the route map
C. forwarded using the closest matching route-map statement
D. forwarded using destination-based routing
Answer: D